Wykres commitów

15765 Commity (c1b0c7eca312c82b78213d5c44a8ff5c56b8e63c)

Autor SHA1 Wiadomość Data
Jared Hancock c1b0c7eca3 wiznet5k: stm32: Add support for nonblocking and settimeout.
Signed-off-by: Jared Hancock <jared@greezybacon.me>
2024-04-07 18:03:25 -05:00
Jared Hancock 4364ad74ae wiznet5k: Add support for ::send on UDP sockets.
Signed-off-by: Jared Hancock <jared@greezybacon.me>
2024-04-07 18:03:17 -05:00
Jared Hancock 26d0ea4006 wiznet5k: Add support for read timeouts.
Signed-off-by: Jared Hancock <jared@greezybacon.me>
2024-04-07 18:03:09 -05:00
Jared Hancock 2e371503d6 wiznet5k: Add support for nonblocking and settimeout.
Signed-off-by: Jared Hancock <jared@greezybacon.me>
2024-04-07 18:02:38 -05:00
Damien George 9d27183bde tests/float/float_struct_e.py: Add specific test for struct 'e' type.
Signed-off-by: Damien George <damien@micropython.org>
2024-03-20 14:13:49 +11:00
Damien George b80607ecaf unix/variants: Don't use native _Float16 type.
Using it increases code size by about 2k.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-20 14:13:49 +11:00
Damien George 0c800cefea stm32/stm32.mk: Enable _Float16 support on MCUs with hardware floats.
Signed-off-by: Damien George <damien@micropython.org>
2024-03-20 14:13:49 +11:00
Matthias Urlichs e520fa2e0f py/binary: Support half-float 'e' format in struct pack/unpack.
This commit implements the 'e' half-float format: 10-bit mantissa, 5-bit
exponent.  It uses native _Float16 if supported by the compiler, otherwise
uses custom bitshifting encoding/decoding routines.

Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Damien George <damien@micropython.org>
2024-03-20 14:13:49 +11:00
Nicko van Someren 77f08b72ca docs/library/rp2.DMA: Add documentation for rp2 DMA support.
Signed-off-by: Nicko van Someren <nicko@nicko.org>
2024-03-19 17:10:54 +11:00
Felix Dörre 1c6012b0b5 extmod/modnetwork: Implement IPv6 API to set and get NIC configuration.
This commit implements a new <AbstractNIC>.ipconfig() function for the NIC
classes that use lwIP, to set and retrieve network configuration for a NIC.
Currently this method supports:
- ipconfig("addr4"): obtain a tuple (addr, netmask) of the currently
  configured ipv4 address
- ipconfig("addr6"): obtain a list of tuples (addr, state,
  prefered_lifetime, valid_lifetime) of all currently active ipv6
  addresses; this includes static, slaac and link-local addresses
- ipconfig("has_dhcp4"): whether ipv4 dhcp has supplied an address
- ipconfig("has_autoconf6"): if there is a valid, non-static ipv6 address
- ipconfig(addr4="1.2.3.4/24"): to set the ipv4 address and netmask
- ipconfig(addr6="2a01::2"): to set a static ipv6 address; note that this
  does not configure an interface route, as this does not seem supported by
  lwIP
- ipconfig(autoconf6=True): to enable ipv6 network configuration with slaac
- ipconfig(gw4="1.2.3.1"): to set the ipv4 gateway
- ipconfig(dhcp4=True): enable ipv4 dhcp; this sets ipv4 address, netmask,
  gateway and a dns server
- ipconfig(dhcp4=False): stops dhcp, releases the ip, and clears the
  configured ipv4 address.
- ipconfig(dhcp6=True): enable stateless dhcpv6 to obtain a dns server

There is also a new global configuration function network.ipconfig() that
supports the following:
- network.ipconfig(dns="2a01::2"): set the primary dns server (can be a
  ipv4 or ipv6 address)
- network.ipconfig(prefer=6): to prefer ipv6 addresses to be returned as
  dns responses (falling back to ipv4 if the host does not have an ipv6
  address); note that this does not flush the dns cache, so if a host is
  already in the dns cache with its v4 address, subsequent lookups will
  return that address even if prefer=6 is set

This interface replaces NIC.ifconfig() completely, and ifconfig() should be
marked as deprecated and removed in a future version.

Signed-off-by: Felix Dörre <felix@dogcraft.de>
2024-03-19 16:42:10 +11:00
Damien George 52c678c6f8 stm32/boards/LEGO_HUB_NO6: Use a raw filesystem for mboot to update fw.
The C-based SPI flash driver is needed because the
`_copy_file_to_raw_filesystem()` function must copy from a filesystem (eg
FAT) to another part of flash, and the same C code must be used for both
reading (from FAT) and writing (to flash).

Signed-off-by: Damien George <damien@micropython.org>
2024-03-19 11:41:55 +11:00
Damien George 899592ac34 stm32/boards/LEGO_HUB_NO6: Move robust logic to mboot.
Signed-off-by: Damien George <damien@micropython.org>
2024-03-19 11:40:14 +11:00
Damien George 9651046edd stm32/mboot: Add support for a raw filesystem.
This is enabled by default if MBOOT_FSLOAD is enabled, although a board
can explicitly disable it by `#define MBOOT_VFS_RAW (0)`.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-19 11:38:36 +11:00
Damien George 3c445f6636 py/emitnative: Implement viper unary ops positive, negative and invert.
Signed-off-by: Damien George <damien@micropython.org>
2024-03-19 10:31:36 +11:00
Damien George b50efbd0e3 py/asmxtensa: Optimise asm_xtensa_mov_reg_i32_optimised() for tiny ints.
Signed-off-by: Damien George <damien@micropython.org>
2024-03-19 10:31:36 +11:00
Damien George f52b0d0ff1 py/asm: Add ASM_NOT_REG and ASM_NEG_REG macros for unary ops.
ASM_NOT_REG is optional, it can be synthesised by xor(reg, -1).
ASM_NEG_REG can also be synthesised with a subtraction, but most
architectures have a dedicated instruction for it.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-19 10:31:36 +11:00
Damien George d92dff881c docs/library/collections: Update deque docs to describe new features.
Signed-off-by: Damien George <damien@micropython.org>
2024-03-19 10:09:11 +11:00
Damien George c9016b4979 tests/basics: Split MicroPython-specific deque tests to separate file.
So that the MicroPython-specific behaviour can be isolated, and the CPython
compatible test don't need a .exp file.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-19 10:08:32 +11:00
Damien George bf18ddd989 tools/mpy-tool.py: Fix merging of more than 128 mpy files.
The argument to MP_BC_MAKE_FUNCTION (raw code index) was being encoded as a
byte instead of a variable unsigned int.  That meant that if there were
more than 128 merged mpy files the encoding would be invalid.

Fix that by using `mp_encode_uint(idx)` to encode the raw code index.  And
also use `Opcode` constants for the opcode values to make it easier to
understand the code.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-19 10:08:05 +11:00
Dash Peters 7dff38fdc1 py/objdeque: Expand implementation to be doubly-ended and support iter.
Add `pop()`, `appendleft()`, and `extend()` methods, support iteration
and indexing, and initializing from an existing sequence.

Iteration and indexing (subscription) have independent configuration flags
to enable them.  They are enabled by default at the same level that
collections.deque is enabled (the extra features level).

Also add tests for checking new behavior.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-18 14:10:14 +11:00
Damien George cd8eea2ae9 all: Update extmod, ports, examples to build with new berkeley-db lib.
This provides a MicroPython-specific berkeley-db configuration in
extmod/berkeley-db/berkeley_db_config_port.h, and cleans up the include
path for this library.

Fixes issue #13092.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-16 12:19:12 +11:00
Damien George 305707b281 lib/berkeley-db-1.xx: Update submodule URL and version.
This updates the berkeley-db-1.xx submodule URL to a repository hosted
under the micropython organisation, and makes the following changes:

- Moves the berkeley-db header files to a single directory within the
  submodule, and references all these headers with a much fuller path,
  which prevents symbol clashes (eg with esp32 and queue.h).

- Removes unused/non-working files from berkeley-db, which removes all
  symlinks in that repo (symlinks don't play well under Windows).

- Allows injecting an external configuration header into berkeley-db, so
  the configuration doesn't have to be provided by -Dxx=yy flags to the
  compiler (and possibly clashing with other symbols).

- Removes the advertising clause from the BSD 4-clause license of
  berkeley-db (see relevant commit and README.Impt.License.Change for
  details).

Signed-off-by: Damien George <damien@micropython.org>
2024-03-16 12:12:48 +11:00
Felix Dörre 01c31ea804 extmod/os_dupterm: Handle exception properly when it occurs in parallel.
When an exception is handled and the stream is closed, but while this
happens, another exception occurs or dupterm is deactivated for another
reason, the initial deactivation crashes, because its dupterm is removed.

Co-authored-by: Damien George <damien@micropython.org>

Signed-off-by: Felix Dörre <felix@dogcraft.de>
2024-03-16 10:59:03 +11:00
Damien George fb3820e3d6 nrf/boards: Enable MICROPY_HW_ENABLE_USBDEV on boards with USB CDC.
These boards were broken by 9d0d262be0.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-16 00:40:39 +11:00
Damien George df2ff0c355 LICENSE: Add libmetal and open-amp to 3rd-party license list.
Signed-off-by: Damien George <damien@micropython.org>
2024-03-15 18:11:28 +11:00
iabdalkader 486ca3a688 tools/ci.sh: Add Arduino GIGA to stm32 CI build.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader e5ca06a06f docs/library/openamp: Document the new openamp module.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader 864e4596bf stm32/boards/ARDUINO_PORTENTA_H7: Enable OpenAMP.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader fc97343639 stm32/boards/ARDUINO_NICLA_VISION: Enable OpenAMP.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader c859978da3 stm32/boards/ARDUINO_GIGA: Enable OpenAMP.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader 09eb4caccb stm32: Implement port backend for OpenAMP's remoteproc.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader 13297d8c3a stm32: Implement port backend for libmetal.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader 81aba8253a extmod/modopenamp_remoteproc: Add new OpenAMP RemoteProc class.
RemoteProc provides an API to load firmware and control remote processors.

Note: port-specific operations must be implemented to support this class.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader 14dae42fe7 extmod/modopenamp: Add new OpenAMP module.
This module implements OpenAMP's basic initialization and shared resources
support, and provides support for OpenAMP's RPMsg component, by providing
an `endpoint` type (a logical connection on top of RPMsg channel) which can
be used to communicate with the remote core.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader 162054be85 stm32/mpu: Add MPU config for shared, uncached memory region.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
Damien George b726022509 py/stream: Factor stream implementations.
So there's only one location that does the ioctl(MP_STREAM_SEEK) call.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-15 18:11:28 +11:00
iabdalkader 85028aadab py/stream: Add mp_stream_seek() helper function.
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader 61ee59ad89 extmod/libmetal: Add MicroPython platform for libmetal.
Add a MicroPython platform for libmetal, based on the generic platform.
The MicroPython platform uses common mp_hal_xxx functions and allows ports
to customize default configurations for libmetal.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 18:11:28 +11:00
iabdalkader f6213ffc5c lib/libmetal: Add libmetal submodule.
libmetal provides an abstraction of the underlying hardware, to support
other OpenAMP components.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 17:35:39 +11:00
iabdalkader 5bed292c06 lib/open-amp: Add OpenAMP submodule.
OpenAMP framework provides a standard inter processor communications
infrastructure for RTOS and bare metal environments. There are 3 major
components in OpenAMP: libmetal, remoteproc and RPMsg. libmetal provides
abstraction of the low-level underlying hardware, remoteproc is used for
processor Life Cycle Management (LCM) like loading firmware, starting,
stopping a core etc., and RPMsg is a bus infrastructure that enables Inter
Processor Communications (IPC) between different cores.

Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
2024-03-15 17:35:13 +11:00
Angus Gratton 7f5d8c4605 samd: Enable support for Python USB devices.
This work was funded through GitHub Sponsors.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2024-03-15 14:24:52 +11:00
Angus Gratton 0baa3b5528 rp2: Enable support for Python USB devices.
This work was funded through GitHub Sponsors.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2024-03-15 14:24:52 +11:00
Angus Gratton 9d0d262be0 extmod/machine_usb_device: Add support for Python USB devices.
This new machine-module driver provides a "USBDevice" singleton object and
a shim TinyUSB "runtime" driver that delegates the descriptors and all of
the TinyUSB callbacks to Python functions.  This allows writing arbitrary
USB devices in pure Python.  It's also possible to have a base built-in
USB device implemented in C (eg CDC, or CDC+MSC) and a Python USB device
added on top of that.

This work was funded through GitHub Sponsors.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2024-03-15 14:22:11 +11:00
Angus Gratton 43904acea8 mimxrt: Define the MICROPY_HW_ENABLE_USBDEV macro.
Previously USB was always enabled, but this created some conflicts when
adding guards to other files on other ports.

Note the configuration with USB disabled hasn't been tested and probably
won't build or run without further work.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2024-03-15 13:37:42 +11:00
Angus Gratton 47e84751fb py/objstr: Add a macro to define a bytes object at compile time.
This work was funded through GitHub Sponsors.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2024-03-15 13:37:31 +11:00
Kwabena W. Agyeman fff66c3069 mimxrt/mpconfigport: Enable cryptolib and hashlib md5.
Signed-off-by: Kwabena W. Agyeman <kwagyeman@live.com>
2024-03-15 13:24:23 +11:00
Daniël van de Giessen 58a596f4a9 extmod/nimble: Check for active before setting address mode.
`BLE().config(addr_mode=...)` is not safe to call if the NimBLE stack is
not yet active (because it tries to acquire mutexes which should be
initialized first).

Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
2024-03-15 12:59:58 +11:00
Damien George bfc3dde2c9 extmod/modmachine: Add MICROPY_PY_MACHINE_RESET configuration option.
Disabled by default, but enabled on all boards that previously had
`MICROPY_PY_MACHINE_BARE_METAL_FUNCS` enabled.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-15 12:04:37 +11:00
Damien George dd134e4836 extmod/modmachine: Add MICROPY_PY_MACHINE_MEMX configuration option.
Enabled by default.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-15 12:04:34 +11:00
Damien George 23ccbcf230 extmod/modmachine: Add MICROPY_PY_MACHINE_SIGNAL configuration option.
Enabled by default.

Signed-off-by: Damien George <damien@micropython.org>
2024-03-15 12:04:25 +11:00