kopia lustrzana https://github.com/SP8EBC/ParaTNC
rodzic
f84f6b1a5e
commit
499cd18c2a
Plik binarny nie jest wyświetlany.
Po Szerokość: | Wysokość: | Rozmiar: 109 KiB |
|
@ -0,0 +1,6 @@
|
||||||
|
1 - czarny
|
||||||
|
2 - czerwony
|
||||||
|
3 - żółty
|
||||||
|
4 - zielony
|
||||||
|
|
||||||
|
3 z 1 - 1k ohm
|
|
@ -55,6 +55,8 @@ typedef struct config_data_mode_t {
|
||||||
|
|
||||||
uint8_t wx_ms5611_or_bme; // set to one to choose bme, zero to ms5611
|
uint8_t wx_ms5611_or_bme; // set to one to choose bme, zero to ms5611
|
||||||
|
|
||||||
|
uint8_t wx_anemometer_pulses_constant; // #define _ANEMOMETER_PULSES_IN_10SEC_PER_ONE_MS_OF_WINDSPEED 10
|
||||||
|
|
||||||
uint8_t victron;
|
uint8_t victron;
|
||||||
|
|
||||||
uint8_t digi_viscous;
|
uint8_t digi_viscous;
|
||||||
|
|
|
@ -6,7 +6,7 @@
|
||||||
#include "config_data.h"
|
#include "config_data.h"
|
||||||
|
|
||||||
#define SW_VER "EA00"
|
#define SW_VER "EA00"
|
||||||
#define SW_DATE "21092021"
|
#define SW_DATE "24092021"
|
||||||
|
|
||||||
#define SYSTICK_TICKS_PER_SECONDS 100
|
#define SYSTICK_TICKS_PER_SECONDS 100
|
||||||
#define SYSTICK_TICKS_PERIOD 10
|
#define SYSTICK_TICKS_PERIOD 10
|
||||||
|
|
|
@ -0,0 +1,294 @@
|
||||||
|
/*
|
||||||
|
* config.h
|
||||||
|
*
|
||||||
|
* Created on: 03.07.2017
|
||||||
|
* Author: mateusz
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef STATION_CONFIG_H_
|
||||||
|
#define STATION_CONFIG_H_
|
||||||
|
|
||||||
|
//#define _POWERSAVE_NORMAL
|
||||||
|
#define _POWERSAVE_AGGRESIVE
|
||||||
|
/* ------------------ */
|
||||||
|
/* MODES OF OPERATION */
|
||||||
|
|
||||||
|
#define _METEO // Enable meteo station
|
||||||
|
//#define _DIGI // Enable WIDE1-1 digipeater
|
||||||
|
//#define _DIGI_ONLY_789 // Limit digipeater to handle only -7, -8 and -9 SSIDs
|
||||||
|
//#define _VICTRON // Enable support for Victron VE.Direct protocol
|
||||||
|
|
||||||
|
#define _GSM // only for ParaMETEO
|
||||||
|
|
||||||
|
#define _WX_DOUBLE_TRANSMIT
|
||||||
|
|
||||||
|
/* MODES OF OPERATION */
|
||||||
|
/* ------------------ */
|
||||||
|
|
||||||
|
//#define PARATNC_HWREV_C
|
||||||
|
#define PARAMETEO
|
||||||
|
|
||||||
|
/* ---------------------------- */
|
||||||
|
/* WEATHER/METEO CONFIGURATION */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// If none of those three sources are chosen (uncommented) the software will use internal sensors
|
||||||
|
|
||||||
|
//#define _UMB_MASTER
|
||||||
|
//#define _DAVIS_SERIAL
|
||||||
|
//#define _MODBUS_RTU // use Modbus RTU slave devices as a external meteo data source. For more configuration
|
||||||
|
// (slave ids, registers...) please look into MODBUS RTU CONFIGURATION section of this file
|
||||||
|
|
||||||
|
#define _INTERNAL_AS_BACKUP // if defined ParaTNC will switch to internal sensors in case of
|
||||||
|
// the communication with UMB/Dallas Serial/Modbus external sensors will hang up
|
||||||
|
|
||||||
|
|
||||||
|
//#define _DALLAS_AS_TELEM // Use Dallas one-wire thermometer as a 5th telemetry channel
|
||||||
|
// May be used even if _METEO is not enabled
|
||||||
|
#define _DALLAS_SPLIT_PIN // Must be enabled for all ParaTNC hardware revisions
|
||||||
|
|
||||||
|
|
||||||
|
/******** INTERNAL SENSORS CONFIGURATION *****************/
|
||||||
|
|
||||||
|
//#define _ANEMOMETER_TX20 // Use TX20 as an internal anemometer
|
||||||
|
#define _ANEMOMETER_ANALOGUE // Use analogue/mechanical (like Davis 6410) as an internal anemometr
|
||||||
|
#define _ANEMOMETER_PULSES_IN_10SEC_PER_ONE_MS_OF_WINDSPEED 10
|
||||||
|
|
||||||
|
#define _SENSOR_MS5611
|
||||||
|
//#define _SENSOR_BME280
|
||||||
|
|
||||||
|
#define _UMB_SLAVE_ID 1
|
||||||
|
#define _UMB_SLAVE_CLASS 8
|
||||||
|
#define _UMB_CHANNEL_WINDSPEED 460
|
||||||
|
#define _UMB_CHANNEL_WINDGUSTS 440
|
||||||
|
#define _UMB_CHANNEL_WINDDIRECTION 580
|
||||||
|
#define _UMB_CHANNEL_TEMPERATURE 100
|
||||||
|
#define _UMB_CHANNEL_QFE 300
|
||||||
|
|
||||||
|
/******** INTERNAL SENSORS CONFIGURATION *****************/
|
||||||
|
|
||||||
|
/*************** DATA SOURCES CONFIG ***********************/
|
||||||
|
#define _TEMPERATURE_INTERNAL
|
||||||
|
//#define _TEMPERATURE_UMB
|
||||||
|
//#define _TEMPERATURE_RTU
|
||||||
|
//#define _TEMPERATURE_DAVIS
|
||||||
|
//
|
||||||
|
#define _PRESSURE_INTERNAL
|
||||||
|
//#define _PRESSURE_UMB
|
||||||
|
//#define _PRESSURE_RTU
|
||||||
|
//#define _PRESSURE_DAVIS
|
||||||
|
//
|
||||||
|
#define _HUMIDITY_INTERNAL
|
||||||
|
//#define _HUMIDITY_UMB
|
||||||
|
//#define _HUMIDITY_RTU
|
||||||
|
//#define _HUMIDITY_DAVIS
|
||||||
|
//
|
||||||
|
//
|
||||||
|
#define _WIND_INTERNAL
|
||||||
|
//#define _WIND_UMB
|
||||||
|
//#define _WIND_RTU
|
||||||
|
//#define _WIND_FULL_RTU
|
||||||
|
//#define _WIND_DAVIS
|
||||||
|
/*************** DATA SOURCES CONFIG ***********************/
|
||||||
|
|
||||||
|
|
||||||
|
/* WEATHER/METEO CONFIGURATION */
|
||||||
|
/* ---------------------------- */
|
||||||
|
|
||||||
|
//#define _MUTE_RF // TODO: Not yet implemented - This will make station RXonly and disable all data transmission
|
||||||
|
//#define _MUTE_OWN // TODO: Not yet implemented - This will disable all self-generated packets (wx, telemetry, beacon)
|
||||||
|
// and switch device to "pure" kiss TNC operation. Packets from PC will be transmitted normally.
|
||||||
|
|
||||||
|
// Coordines should be in APRS decimal format DDDMM.SS for Longitude and DDMM.SS for latitude
|
||||||
|
#define _CALL "SR9WXZ"
|
||||||
|
#define _SSID 0
|
||||||
|
#define _LAT 4943.44
|
||||||
|
#define _LATNS 'N'
|
||||||
|
#define _LON 01912.11
|
||||||
|
#define _LONWE 'E'
|
||||||
|
#define _COMMENT "WX only = TXPower 2W = Klub Zeglarski Halny, plywajaca keja manewrowa na J. Zywieckim = sp8ebc@interia.pl"
|
||||||
|
|
||||||
|
// You can use only one of these below defines to choose symbol. Meteo data are are always transmitted with blue WX symbol
|
||||||
|
//#define _SYMBOL_DIGI // uncomment if you want digi symbol(green star with D inside)
|
||||||
|
//#define _SYMBOL_WIDE1_DIGI // uncomment if you want 'little' digi symbol (green star with digit 1 overlaid)
|
||||||
|
//#define _SYMBOL_HOUSE // uncomment if you want house symbol
|
||||||
|
//#define _SYMBOL_RXIGATE // uncomment if you want rxigate symbol (black diamond with R)
|
||||||
|
//#define _SYMBOL_IGATE // uncomment if you want igate symol (black diamond with I)
|
||||||
|
#define _SYMBOL_SAILBOAT
|
||||||
|
|
||||||
|
// Or you can keep commented all symbol defines and choose custom one based on data from APRS symbols table
|
||||||
|
//#define _SYMBOL_F '/'
|
||||||
|
//#define _SYMBOL_S '#'
|
||||||
|
|
||||||
|
// Uncomment one of these two defines to choose what path You want. If you uncommend both of them or
|
||||||
|
// if you keep both commended path will be completely disabled. CALL-S>AKLPRZ:data
|
||||||
|
//#define _WIDE1_PATH // CALL-S>AKLPRZ,WIDE1-1:data
|
||||||
|
//#define _WIDE21_PATH // CALL-S>AKLPRZ,WIDE2-1:data
|
||||||
|
|
||||||
|
// Comment this to disable beacon auto sending during startup (this can be risky if RF feedback occur)
|
||||||
|
#define _BCN_ON_STARTUP
|
||||||
|
|
||||||
|
#define _WX_INTERVAL 5 // WX packet interval in minutes
|
||||||
|
#define _BCN_INTERVAL 45 // Own beacon interval in minutes
|
||||||
|
|
||||||
|
#define _PTT_PUSHPULL // Uncomment this if you want PTT line to work as Push-pull instead of Open Drain
|
||||||
|
#define _SERIAL_BAUDRATE 9600
|
||||||
|
|
||||||
|
// Transmitting delay
|
||||||
|
#define _DELAY_BASE 20 // * 50ms. For example setting 10 gives 500msec delay. Maximum value is 20
|
||||||
|
//#define _RANDOM_DELAY // adds random delay TO fixed time set by _DELAY_BASE. This additional time can be
|
||||||
|
// from 100ms up to 1 sec in 100ms steps. Values are drawn from samples going from ADC
|
||||||
|
// so it is better to use Unsquelched output in radio to provide much more randomness
|
||||||
|
//After waiting time declared above ParaTNC will check DCD (Data Carrier Detect) flag, which works as some
|
||||||
|
//kind of semaphore. If radio channel is not occupied by any other transmission TX will be keyed up immediately,
|
||||||
|
//otherwise software will wait for clear conditions.
|
||||||
|
|
||||||
|
// Few IMPORTANT hints about setting transmit delay properly.
|
||||||
|
//
|
||||||
|
// Transmit delay is key parameter to maintain RF network free from packet losses and collisions. If your station will be
|
||||||
|
// installed on tall object, without any other digi's close to it, you can set _DELAY_BASE to very low value and disable
|
||||||
|
// _RANDOM_DELAY. If you wanna rather auxiliary station, witch should only fill gap in RF coverage in small area, then
|
||||||
|
// _DELAY_BASE parameter should be not less than 12 (600msec), the smallest range the higher _DELAY_BASE should be.
|
||||||
|
// Additionally for gapfillers (auxiliary stations) _RANDOM_DELAY schould be enabled.
|
||||||
|
//
|
||||||
|
// This delay will ensure that while other station will be transmitting repeated packets from mobile, Yours will keep
|
||||||
|
// always quiet and won't jam RF network. This greatly improve DCD based access to channel. Various controllers uses
|
||||||
|
// various lenght of preamble, some of them produce signal which might be impossible to decode by ParaTNC, so DCD
|
||||||
|
// is only one part of effective multiaccess to medium.
|
||||||
|
|
||||||
|
/* ---------------------------- */
|
||||||
|
/* MODBUS RTU CONFIGURATION */
|
||||||
|
|
||||||
|
// scaling coefficients are used as follows
|
||||||
|
//
|
||||||
|
// A * x ^ 2 + B * x + C
|
||||||
|
// real value = ---------------------------
|
||||||
|
// D
|
||||||
|
//
|
||||||
|
// because of that D cannot be set to zero
|
||||||
|
#define _RTU_SLAVE_SPEED 9600u
|
||||||
|
#define _RTU_SLAVE_PARITY 0
|
||||||
|
#define _RTU_SLAVE_STOP_BITS 2
|
||||||
|
|
||||||
|
#define _RTU_SLAVE_ID_1 0x01
|
||||||
|
#define _RTU_SLAVE_FUNC_1 0x03
|
||||||
|
#define _RTU_SLAVE_ADDR_1 0x00
|
||||||
|
#define _RTU_SLAVE_LENGHT_1 0x01
|
||||||
|
#define _RTU_SLAVE_SCALING_A_1 0
|
||||||
|
#define _RTU_SLAVE_SCALING_B_1 1
|
||||||
|
#define _RTU_SLAVE_SCALING_C_1 0
|
||||||
|
#define _RTU_SLAVE_SCALING_D_1 10
|
||||||
|
|
||||||
|
#define _RTU_SLAVE_ID_2 0x01
|
||||||
|
#define _RTU_SLAVE_FUNC_2 0x03
|
||||||
|
#define _RTU_SLAVE_ADDR_2 0x01
|
||||||
|
//#define _RTU_SLAVE_LENGHT_2 0x01
|
||||||
|
#define _RTU_SLAVE_SCALING_A_2 0
|
||||||
|
#define _RTU_SLAVE_SCALING_B_2 1
|
||||||
|
#define _RTU_SLAVE_SCALING_C_2 0
|
||||||
|
#define _RTU_SLAVE_SCALING_D_2 1
|
||||||
|
|
||||||
|
#define _RTU_SLAVE_ID_3 0x01
|
||||||
|
#define _RTU_SLAVE_FUNC_3 0x03
|
||||||
|
#define _RTU_SLAVE_ADDR_3 0x02
|
||||||
|
//#define _RTU_SLAVE_LENGHT_3 0x01
|
||||||
|
#define _RTU_SLAVE_SCALING_A_3 0
|
||||||
|
#define _RTU_SLAVE_SCALING_B_3 1
|
||||||
|
#define _RTU_SLAVE_SCALING_C_3 0
|
||||||
|
#define _RTU_SLAVE_SCALING_D_3 1
|
||||||
|
|
||||||
|
#define _RTU_SLAVE_ID_4 0x01
|
||||||
|
#define _RTU_SLAVE_FUNC_4 0x03
|
||||||
|
#define _RTU_SLAVE_ADDR_4 0x03
|
||||||
|
//#define _RTU_SLAVE_LENGHT_4 0x01
|
||||||
|
#define _RTU_SLAVE_SCALING_A_4 0
|
||||||
|
#define _RTU_SLAVE_SCALING_B_4 1
|
||||||
|
#define _RTU_SLAVE_SCALING_C_4 0
|
||||||
|
#define _RTU_SLAVE_SCALING_D_4 1
|
||||||
|
|
||||||
|
#define _RTU_SLAVE_ID_5 0x00
|
||||||
|
#define _RTU_SLAVE_FUNC_5 0x00
|
||||||
|
#define _RTU_SLAVE_ADDR_5 0x03
|
||||||
|
//#define _RTU_SLAVE_LENGHT_4 0x01
|
||||||
|
#define _RTU_SLAVE_SCALING_A_5 0
|
||||||
|
#define _RTU_SLAVE_SCALING_B_5 1
|
||||||
|
#define _RTU_SLAVE_SCALING_C_5 0
|
||||||
|
#define _RTU_SLAVE_SCALING_D_5 1
|
||||||
|
|
||||||
|
|
||||||
|
#define _RTU_SLAVE_ID_6 0x00
|
||||||
|
#define _RTU_SLAVE_FUNC_6 0x00
|
||||||
|
#define _RTU_SLAVE_ADDR_6 0x00
|
||||||
|
//#define _RTU_SLAVE_LENGHT_4 0x01
|
||||||
|
#define _RTU_SLAVE_SCALING_A_6 0
|
||||||
|
#define _RTU_SLAVE_SCALING_B_6 1
|
||||||
|
#define _RTU_SLAVE_SCALING_C_6 0
|
||||||
|
#define _RTU_SLAVE_SCALING_D_6 1
|
||||||
|
|
||||||
|
//#define _RTU_SLAVE_TEMPERATURE_SOURCE 1
|
||||||
|
#define _RTU_SLAVE_HUMIDITY_SOURCE 2
|
||||||
|
//#define _RTU_SLAVE_PRESSURE_SOURCE 3
|
||||||
|
//#define _RTU_SLAVE_WIND_DIRECTION_SORUCE 4
|
||||||
|
//#define _RTU_SLAVE_WIND_SPEED_SOURCE 4
|
||||||
|
|
||||||
|
|
||||||
|
/* MODBUS RTU CONFIGURATION */
|
||||||
|
/* ---------------------------- */
|
||||||
|
|
||||||
|
// Do not touch this
|
||||||
|
#if defined (_SYMBOL_DIGI) && !defined (_SYMBOL_WIDE1_DIGI) && !defined (_SYMBOL_HOUSE) && !defined (_SYMOL_RXIGATE) &&\
|
||||||
|
!defined (_SYMBOL_IGATE)
|
||||||
|
#define _SYMBOL_F '/'
|
||||||
|
#define _SYMBOL_S '#'
|
||||||
|
#elif !defined (_SYMBOL_DIGI) && defined (_SYMBOL_WIDE1_DIGI) && !defined (_SYMBOL_HOUSE) && !defined (_SYMOL_RXIGATE) &&\
|
||||||
|
!defined (_SYMBOL_IGATE)
|
||||||
|
#define _SYMBOL_F '1'
|
||||||
|
#define _SYMBOL_S '#'
|
||||||
|
#elif !defined (_SYMBOL_DIGI) && !defined (_SYMBOL_WIDE1_DIGI) && defined (_SYMBOL_HOUSE) && !defined (_SYMOL_RXIGATE) &&\
|
||||||
|
!defined (_SYMBOL_IGATE)
|
||||||
|
#define _SYMBOL_F '/'
|
||||||
|
#define _SYMBOL_S '-'
|
||||||
|
#elif !defined (_SYMBOL_DIGI) && !defined (_SYMBOL_WIDE1_DIGI) && !defined (_SYMBOL_HOUSE) && defined (_SYMOL_RXIGATE) &&\
|
||||||
|
!defined (_SYMBOL_IGATE)
|
||||||
|
#define _SYMBOL_F 'I'
|
||||||
|
#define _SYMBOL_S '&'
|
||||||
|
#elif !defined (_SYMBOL_DIGI) && !defined (_SYMBOL_WIDE1_DIGI) && !defined (_SYMBOL_HOUSE) && !defined (_SYMOL_RXIGATE) &&\
|
||||||
|
defined (_SYMBOL_IGATE)
|
||||||
|
#define _SYMBOL_F 'R'
|
||||||
|
#define _SYMBOL_S '&'
|
||||||
|
#elif !defined (_SYMBOL_DIGI) && !defined (_SYMBOL_WIDE1_DIGI) && !defined (_SYMBOL_HOUSE) && !defined (_SYMOL_RXIGATE) &&\
|
||||||
|
!defined (_SYMBOL_IGATE) && defined(_SYMBOL_SAILBOAT)
|
||||||
|
#define _SYMBOL_F '/'
|
||||||
|
#define _SYMBOL_S 'Y'
|
||||||
|
#elif !defined (_SYMBOL_F) && !defined (_SYMBOL_S)
|
||||||
|
#error "Missing symbol configuration in station_config.h"
|
||||||
|
#elif defined (_SYMBOL_F) && defined (_SYMBOL_S)
|
||||||
|
#else
|
||||||
|
#error "Wrong symbol configuration in station_config.h"
|
||||||
|
#endif
|
||||||
|
//#if defined (_METEO) && !defined (_DIGI)
|
||||||
|
//#define _DIGI
|
||||||
|
//#endif
|
||||||
|
|
||||||
|
#if defined(PARATNC_HWREV_A) && (defined (_METEO) || defined (_DALLAS_AS_TELEM)) && !defined(_DALLAS_SPLIT_PIN)
|
||||||
|
#define _DALLAS_SPLIT_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(PARATNC_HWREV_B) && (defined (_METEO) || defined (_DALLAS_AS_TELEM)) && !defined(_DALLAS_SPLIT_PIN)
|
||||||
|
#define _DALLAS_SPLIT_PIN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(_ANEMOMETER_TX20) && defined(_ANEMOMETER_ANALOGUE)
|
||||||
|
#error "You cannot use two anemometers at once!!!"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(_MOBUS_RTU) && defined(_DAVIS_SERIAL)
|
||||||
|
#error "You cannot use modbus RTU devices and Davis weather station at once!!!"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !defined(_ANEMOMETER_TX20) && !defined(_ANEMOMETER_ANALOGUE) && !defined(_UMB_MASTER) && defined(_METEO)
|
||||||
|
#define _ANEMOMETER_TX20
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* STATION_CONFIG_H_ */
|
|
@ -0,0 +1,23 @@
|
||||||
|
/*
|
||||||
|
* station_config_target_hw.h
|
||||||
|
*
|
||||||
|
* Created on: May 30, 2021
|
||||||
|
* Author: mateusz
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef STATION_CONFIG_TARGET_HW_H_
|
||||||
|
#define STATION_CONFIG_TARGET_HW_H_
|
||||||
|
|
||||||
|
//#define PARATNC_HWREV_A
|
||||||
|
//#define PARATNC_HWREV_B
|
||||||
|
//#define PARATNC_HWREV_C
|
||||||
|
#define PARAMETEO
|
||||||
|
|
||||||
|
#ifdef PARAMETEO
|
||||||
|
// those defines and an undef are only required for shitty Eclipse indexer to see anything from STM32L471xx target
|
||||||
|
#define STM32L471xx
|
||||||
|
#define USE_FULL_LL_DRIVER
|
||||||
|
#undef STM32F10X_MD_VL
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* STATION_CONFIG_TARGET_HW_H_ */
|
|
@ -86,6 +86,8 @@ volatile const config_data_mode_t config_data_mode_default = {
|
||||||
.wx_ms5611_or_bme = 0,
|
.wx_ms5611_or_bme = 0,
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
.wx_anemometer_pulses_constant = _ANEMOMETER_PULSES_IN_10SEC_PER_ONE_MS_OF_WINDSPEED,
|
||||||
|
|
||||||
#ifdef _DIGI_ONLY_789
|
#ifdef _DIGI_ONLY_789
|
||||||
.digi_only_ssids = 1,
|
.digi_only_ssids = 1,
|
||||||
#else
|
#else
|
||||||
|
|
|
@ -90,6 +90,8 @@ const config_data_mode_t __attribute__((section(".config_section_first.mode")))
|
||||||
.wx_ms5611_or_bme = 0,
|
.wx_ms5611_or_bme = 0,
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
.wx_anemometer_pulses_constant = _ANEMOMETER_PULSES_IN_10SEC_PER_ONE_MS_OF_WINDSPEED,
|
||||||
|
|
||||||
#ifdef _DIGI_ONLY_789
|
#ifdef _DIGI_ONLY_789
|
||||||
.digi_only_ssids = 1,
|
.digi_only_ssids = 1,
|
||||||
#else
|
#else
|
||||||
|
|
|
@ -84,6 +84,8 @@ const config_data_mode_t __attribute__((section(".config_section_second.mode")))
|
||||||
.wx_ms5611_or_bme = 0,
|
.wx_ms5611_or_bme = 0,
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
.wx_anemometer_pulses_constant = _ANEMOMETER_PULSES_IN_10SEC_PER_ONE_MS_OF_WINDSPEED,
|
||||||
|
|
||||||
#ifdef _DIGI_ONLY_789
|
#ifdef _DIGI_ONLY_789
|
||||||
.digi_only_ssids = 1,
|
.digi_only_ssids = 1,
|
||||||
#else
|
#else
|
||||||
|
|
|
@ -706,10 +706,10 @@ int main(int argc, char* argv[]){
|
||||||
}
|
}
|
||||||
|
|
||||||
if ((main_config_data_mode->wx & WX_INTERNAL_SPARKFUN_WIND) == 0) {
|
if ((main_config_data_mode->wx & WX_INTERNAL_SPARKFUN_WIND) == 0) {
|
||||||
analog_anemometer_init(_ANEMOMETER_PULSES_IN_10SEC_PER_ONE_MS_OF_WINDSPEED, 38, 100, 1);
|
analog_anemometer_init(main_config_data_mode->wx_anemometer_pulses_constant, 38, 100, 1);
|
||||||
}
|
}
|
||||||
else {
|
else {
|
||||||
analog_anemometer_init(_ANEMOMETER_PULSES_IN_10SEC_PER_ONE_MS_OF_WINDSPEED, 38, 100, 1);
|
analog_anemometer_init(main_config_data_mode->wx_anemometer_pulses_constant, 38, 100, 1);
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
|
@ -695,11 +695,14 @@ void pwr_save_pooling_handler(const config_data_mode_t * config, const config_da
|
||||||
// reinitialize all i2c sensors
|
// reinitialize all i2c sensors
|
||||||
wx_force_i2c_sensor_reset = 1;
|
wx_force_i2c_sensor_reset = 1;
|
||||||
|
|
||||||
// reset anemometer direction handler
|
// reinitialize everything realted to anemometer
|
||||||
analog_anemometer_direction_reset();
|
analog_anemometer_init(main_config_data_mode->wx_anemometer_pulses_constant, 38, 100, 1);
|
||||||
|
|
||||||
// reset anemometer windspeed handler
|
// // reset anemometer direction handler
|
||||||
analog_anemometer_timer_irq();
|
// analog_anemometer_direction_reset();
|
||||||
|
//
|
||||||
|
// // reset anemometer windspeed handler
|
||||||
|
// analog_anemometer_timer_irq();
|
||||||
}
|
}
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
|
@ -6,7 +6,7 @@
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include "./drivers/dma_helper_functions.h"
|
#include "./drivers/dma_helper_functions.h"
|
||||||
|
#include "station_config_target_hw.h"
|
||||||
#ifdef STM32F10X_MD_VL
|
#ifdef STM32F10X_MD_VL
|
||||||
|
|
||||||
void dma_helper_start_ch7(DMA_InitTypeDef* DMA_InitStruct) {
|
void dma_helper_start_ch7(DMA_InitTypeDef* DMA_InitStruct) {
|
||||||
|
@ -25,9 +25,10 @@ void dma_helper_start_ch7(LL_DMA_InitTypeDef* DMA_InitStruct) {
|
||||||
LL_DMA_DeInit(DMA1, LL_DMA_CHANNEL_5);
|
LL_DMA_DeInit(DMA1, LL_DMA_CHANNEL_5);
|
||||||
LL_DMA_Init(DMA1, LL_DMA_CHANNEL_5, DMA_InitStruct);
|
LL_DMA_Init(DMA1, LL_DMA_CHANNEL_5, DMA_InitStruct);
|
||||||
|
|
||||||
LL_DMA_EnableChannel(DMA1, LL_DMA_CHANNEL_5);
|
|
||||||
LL_DMA_EnableIT_TC(DMA1, LL_DMA_CHANNEL_5);
|
LL_DMA_EnableIT_TC(DMA1, LL_DMA_CHANNEL_5);
|
||||||
|
|
||||||
|
LL_DMA_EnableChannel(DMA1, LL_DMA_CHANNEL_5);
|
||||||
|
|
||||||
//DMA1_Channel7->CCR |= DMA_CCR7_EN;
|
//DMA1_Channel7->CCR |= DMA_CCR7_EN;
|
||||||
//DMA1_Channel7->CCR |= DMA_CCR7_TCIE;
|
//DMA1_Channel7->CCR |= DMA_CCR7_TCIE;
|
||||||
}
|
}
|
||||||
|
|
Plik binarny nie jest wyświetlany.
Po Szerokość: | Wysokość: | Rozmiar: 191 KiB |
Ładowanie…
Reference in New Issue