mirror
/
SP8EBC-ParaTNC
kopia lustrzana https://github.com/SP8EBC/ParaTNC
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

example configiuration

pull/7/head
Mateusz Lubecki 2021-09-23 10:08:00 +02:00
rodzic 390d0e2cb4
commit f84f6b1a5e
1 zmienionych plików z 17 dodań i 10 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

27
include/station_config_example_parameteo.h
Wyświetl plik

@ -18,7 +18,9 @@
//#define _DIGI_ONLY_789 // Limit digipeater to handle only -7, -8 and -9 SSIDs
//#define _VICTRON // Enable support for Victron VE.Direct protocol
//#define _GSM // only for ParaMETEO
#define _GSM // only for ParaMETEO
#define _WX_DOUBLE_TRANSMIT
/* MODES OF OPERATION */
/* ------------------ */
@ -35,7 +37,7 @@
//#define _UMB_MASTER
//#define _DAVIS_SERIAL
#define _MODBUS_RTU // use Modbus RTU slave devices as a external meteo data source. For more configuration
//#define _MODBUS_RTU // use Modbus RTU slave devices as a external meteo data source. For more configuration
// (slave ids, registers...) please look into MODBUS RTU CONFIGURATION section of this file
#define _INTERNAL_AS_BACKUP // if defined ParaTNC will switch to internal sensors in case of
@ -99,20 +101,21 @@
// and switch device to "pure" kiss TNC operation. Packets from PC will be transmitted normally.
// Coordines should be in APRS decimal format DDDMM.SS for Longitude and DDMM.SS for latitude
#define _CALL "SP8EBC"
#define _SSID 1
#define _LAT 4948.82
#define _CALL "SR9WXZ"
#define _SSID 0
#define _LAT 4943.44
#define _LATNS 'N'
#define _LON 01903.50
#define _LON 01912.11
#define _LONWE 'E'
#define _COMMENT "Set Your configuration in this file and rename to station_config.h"
#define _COMMENT "WX only = TXPower 2W = Klub Zeglarski Halny, plywajaca keja manewrowa na J. Zywieckim = sp8ebc@interia.pl"
// You can use only one of these below defines to choose symbol. Meteo data are are always transmitted with blue WX symbol
//#define _SYMBOL_DIGI // uncomment if you want digi symbol(green star with D inside)
#define _SYMBOL_WIDE1_DIGI // uncomment if you want 'little' digi symbol (green star with digit 1 overlaid)
//#define _SYMBOL_WIDE1_DIGI // uncomment if you want 'little' digi symbol (green star with digit 1 overlaid)
//#define _SYMBOL_HOUSE // uncomment if you want house symbol
//#define _SYMBOL_RXIGATE // uncomment if you want rxigate symbol (black diamond with R)
//#define _SYMBOL_IGATE // uncomment if you want igate symol (black diamond with I)
#define _SYMBOL_SAILBOAT
// Or you can keep commented all symbol defines and choose custom one based on data from APRS symbols table
//#define _SYMBOL_F '/'
@ -120,13 +123,13 @@
// Uncomment one of these two defines to choose what path You want. If you uncommend both of them or
// if you keep both commended path will be completely disabled. CALL-S>AKLPRZ:data
#define _WIDE1_PATH // CALL-S>AKLPRZ,WIDE1-1:data
//#define _WIDE1_PATH // CALL-S>AKLPRZ,WIDE1-1:data
//#define _WIDE21_PATH // CALL-S>AKLPRZ,WIDE2-1:data
// Comment this to disable beacon auto sending during startup (this can be risky if RF feedback occur)
#define _BCN_ON_STARTUP
#define _WX_INTERVAL 4 // WX packet interval in minutes
#define _WX_INTERVAL 5 // WX packet interval in minutes
#define _BCN_INTERVAL 45 // Own beacon interval in minutes
#define _PTT_PUSHPULL // Uncomment this if you want PTT line to work as Push-pull instead of Open Drain
@ -254,6 +257,10 @@
defined (_SYMBOL_IGATE)
#define _SYMBOL_F 'R'
#define _SYMBOL_S '&'
#elif !defined (_SYMBOL_DIGI) && !defined (_SYMBOL_WIDE1_DIGI) && !defined (_SYMBOL_HOUSE) && !defined (_SYMOL_RXIGATE) &&\
!defined (_SYMBOL_IGATE) && defined(_SYMBOL_SAILBOAT)
#define _SYMBOL_F '/'
#define _SYMBOL_S 'Y'
#elif !defined (_SYMBOL_F) && !defined (_SYMBOL_S)
#error "Missing symbol configuration in station_config.h"
#elif defined (_SYMBOL_F) && defined (_SYMBOL_S)