kopia lustrzana https://github.com/dl9rdz/rdz_ttgo_sonde
Strona:
Configuration
Strony
Advanced display configuration
Arduino IDE installation
Binary installation
Chasemapper configuration
Configuration
Data feed configuration
Display configuration
Display explanations
First startup
General configuration
Hardware configuration
Home
Installation
Interactive control
MQTT configuration
NFAQ (Not Frequently Asked Questions)
Other features
PlatformIO installation
Receiver configuration
SondeHub import
SondeHub settings
Spectrum configuration
Supported boards
Supported displays
WiFi connection
WiFi‐Verbindung
Wifi configuration
screens5.txt
ttgoconfig script
7
Configuration
dl9rdz edytuje tę stronę 2021-09-21 23:35:19 +02:00
Spis treści
Overview:
First steps:
- First startup What happens if you start a newly flashed board: autoconfiguration
- WiFi configuration Connect your rdzTTGOsonde to a WiFi network
Detailed configuration:
Coonnect to the web interface of your rdzTTGOsonde (http://192.168.4.1 in access point mode, dynamic IP address as shown on display in WiFi client mode, or http://rdzsonde.local if your browser supports mDNS). In the Config tab, you can configure the following items:
- General configuration
- Display configuration
- Spectrum configuration
- Receiver configuration How to calibrate and optimize receiver configuration
- Data feed configuration _How to configure sending received data to external devices (aprsmap, APRSdroid)
- MQTT configuration
- SondeHub settings
- SondeHub import
- Hardware configuration How to adjust configuration to specifics of your hardware