mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
micropython/ports/mimxrt/boards/MIMXRT1020_EVK/pins.csv

50 wiersze
949 B
Plaintext
Czysty Zwykły widok Historia

mimxrt: Implement machine.Pin class. - modified pin type from pin_obj_t to machine_pin_obj_t - created machine_pin.c - implemented basic version of make-pins.py to genertate pins.c/.h files automatically; the only alternate function currently supported is GPIO - added af.csv files for all supported MCUs - replaced pins.c/pins.h files with pin.csv for all boards - implemented on/off/high/low/value/init methods - Implemented IN/OUT/OPEN_DRAIN modes - modified LDFLAGS for DEBUG build to get usefull .elf file for debugging Signed-off-by: Philipp Ebensberger
2020-08-21 14:03:21 +00:00
D0,GPIO_AD_B1_09
D1,GPIO_AD_B1_08
D2,GPIO_AD_B0_09
D3,GPIO_AD_B0_07
D4,GPIO_AD_B0_05
D5,GPIO_AD_B0_06
D6,GPIO_AD_B0_14
D7,GPIO_AD_B1_06
D8,GPIO_AD_B1_07
D9,GPIO_AD_B0_15
D10,GPIO_AD_B0_11
D11,GPIO_AD_B0_12
D12,GPIO_AD_B0_13
D13,GPIO_AD_B0_10
D14,GPIO_SD_B1_03
D15,GPIO_SD_B1_02
A0,GPIO_AD_B1_10
A1,GPIO_AD_B1_11
A2,GPIO_AD_B1_12
A3,GPIO_AD_B1_13
A4,GPIO_AD_B1_15
A5,GPIO_AD_B1_14
RX,GPIO_AD_B1_09
TX,GPIO_AD_B1_08
SDA,GPIO_AD_B1_15
SCL,GPIO_AD_B1_14
I2C_SCL,GPIO_SD_B1_02
I2C_SDA,GPIO_SD_B1_03
SCK,GPIO_AD_B0_10
SDI,GPIO_AD_B0_13
SDO,GPIO_AD_B0_12
CS,GPIO_AD_B0_11
mixmrt/machine_i2s: Add I2S protocol support. This commit adds support for machine.I2S on the mimxrt port. The I2S API is consistent with the existing stm32, esp32, and rp2 implementations. I2S features: - controller transmit and controller receive - 16-bit and 32-bit sample sizes - mono and stereo formats - sampling frequencies from 8kHz to 48kHz - 3 modes of operation: - blocking - non-blocking with callback - uasyncio - configurable internal buffer - optional MCK Tested with the following development boards: - MIMXRT1010_EVK, MIMXRT1015_EVK, MIMXRT1020_EVK, MIMXRT1050_EVK - Teensy 4.0, Teensy 4.1 - Olimex RT1010 - Seeed ARCH MIX Tested with the following I2S hardware peripherals: - UDA1334 - GY-SPH0645LM4H - WM8960 codec on board the MIMXRT boards and separate breakout board - INMP441 - PCM5102 - SGTL5000 on the Teensy audio shield Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-29 17:50:34 +00:00
LED_GREEN,GPIO_AD_B0_05
MCK,GPIO_AD_B1_00
SCK_RX,GPIO_AD_B1_06
WS_RX,GPIO_AD_B1_04
SD_RX,GPIO_AD_B1_05
SCK_TX,GPIO_AD_B1_01
WS_TX,GPIO_AD_B1_02
SD_TX,GPIO_AD_B1_03
mimxrt/boards/make-pins.py: Update to use tools/boardgen.py. Minor change to remove support for using numeric IDs for machine.Pin. This was previously based on the index of the pin in the board csv, but this is different (and incompatible) with other ports. This work was funded through GitHub Sponsors. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-08-16 06:45:09 +00:00
-ENET_RESET,-GPIO_AD_B0_04
-ENET_INT,-GPIO_AD_B1_06
-SD_CMD,-GPIO_SD_B0_02
-SD_CLK,-GPIO_SD_B0_03
-SD_CD,-GPIO_SD_B0_06
-SD_DATA0,-GPIO_SD_B0_04
-SD_DATA1,-GPIO_SD_B0_05
-SD_DATA2,-GPIO_SD_B0_00
-SD_DATA3,-GPIO_SD_B0_01