ci(p4): enable esp32p4 target test

.gitlab/ci/build.yml

@@ -180,6 +180,15 @@ build_pytest_examples_esp32h2:
     IDF_TARGET: esp32h2
     TEST_DIR: examples
 
+build_pytest_examples_esp32p4:
+  extends:
+    - .build_pytest_no_jtag_template
+    - .rules:build:example_test-esp32p4
+  parallel: 2
+  variables:
+    IDF_TARGET: esp32p4
+    TEST_DIR: examples
+
 build_pytest_examples_jtag:  # for all targets
   extends:
     - .build_pytest_jtag_template
@@ -251,6 +260,15 @@ build_pytest_components_esp32h2:
     IDF_TARGET: esp32h2
     TEST_DIR: components
 
+build_pytest_components_esp32p4:
+  extends:
+    - .build_pytest_template
+    - .rules:build:component_ut-esp32p4
+  parallel: 4
+  variables:
+    IDF_TARGET: esp32p4
+    TEST_DIR: components
+
 build_only_components_apps:
   extends:
     - .build_cmake_template
@@ -324,6 +342,14 @@ build_pytest_test_apps_esp32h2:
     IDF_TARGET: esp32h2
     TEST_DIR: tools/test_apps
 
+build_pytest_test_apps_esp32p4:
+  extends:
+    - .build_pytest_template
+    - .rules:build:custom_test-esp32p4
+  variables:
+    IDF_TARGET: esp32p4
+    TEST_DIR: tools/test_apps
+
 build_only_tools_test_apps:
   extends:
     - .build_cmake_template

.gitlab/ci/default-build-test-rules.yml

@@ -9,8 +9,8 @@
 extra_default_build_targets:
  - esp32p4
 
-bypass_check_test_targets:
- - esp32p4
+# bypass_check_test_targets:
+#  - esp32p4
 #
 # These lines would
 # - enable the README.md check for esp32c6. Don't forget to add the build jobs in .gitlab/ci/build.yml

.gitlab/ci/rules.yml

@@ -830,6 +830,44 @@
     - <<: *if-dev-push
       changes: *patterns-target_test-wifi
 
+.rules:build:component_ut-esp32p4:
+  rules:
+    - <<: *if-revert-branch
+      when: never
+    - <<: *if-protected
+    - <<: *if-label-build
+    - <<: *if-label-component_ut
+    - <<: *if-label-component_ut_esp32p4
+    - <<: *if-label-target_test
+    - <<: *if-dev-push
+      changes: *patterns-build_components
+    - <<: *if-dev-push
+      changes: *patterns-build_system
+    - <<: *if-dev-push
+      changes: *patterns-component_ut
+    - <<: *if-dev-push
+      changes: *patterns-component_ut-adc
+    - <<: *if-dev-push
+      changes: *patterns-component_ut-flash_multi
+    - <<: *if-dev-push
+      changes: *patterns-component_ut-i154
+    - <<: *if-dev-push
+      changes: *patterns-component_ut-nvs_encr_hmac
+    - <<: *if-dev-push
+      changes: *patterns-component_ut-sdio
+    - <<: *if-dev-push
+      changes: *patterns-component_ut-usb
+    - <<: *if-dev-push
+      changes: *patterns-component_ut-wifi
+    - <<: *if-dev-push
+      changes: *patterns-downloadable-tools
+    - <<: *if-dev-push
+      changes: *patterns-target_test-adc
+    - <<: *if-dev-push
+      changes: *patterns-target_test-ecdsa
+    - <<: *if-dev-push
+      changes: *patterns-target_test-wifi
+
 .rules:build:component_ut-esp32s2:
   rules:
     - <<: *if-revert-branch
@@ -1069,6 +1107,32 @@
     - <<: *if-dev-push
       changes: *patterns-target_test-wifi
 
+.rules:build:custom_test-esp32p4:
+  rules:
+    - <<: *if-revert-branch
+      when: never
+    - <<: *if-protected
+    - <<: *if-label-build
+    - <<: *if-label-custom_test
+    - <<: *if-label-custom_test_esp32p4
+    - <<: *if-label-target_test
+    - <<: *if-dev-push
+      changes: *patterns-build_components
+    - <<: *if-dev-push
+      changes: *patterns-build_system
+    - <<: *if-dev-push
+      changes: *patterns-custom_test
+    - <<: *if-dev-push
+      changes: *patterns-custom_test-wifi
+    - <<: *if-dev-push
+      changes: *patterns-downloadable-tools
+    - <<: *if-dev-push
+      changes: *patterns-target_test-adc
+    - <<: *if-dev-push
+      changes: *patterns-target_test-ecdsa
+    - <<: *if-dev-push
+      changes: *patterns-target_test-wifi
+
 .rules:build:custom_test-esp32s2:
   rules:
     - <<: *if-revert-branch
@@ -1871,6 +1935,19 @@
     - <<: *if-dev-push
       changes: *patterns-target_test-ecdsa
 
+.rules:test:component_ut-esp32p4:
+  rules:
+    - <<: *if-revert-branch
+      when: never
+    - <<: *if-protected
+    - <<: *if-label-build-only
+      when: never
+    - <<: *if-label-component_ut
+    - <<: *if-label-component_ut_esp32p4
+    - <<: *if-label-target_test
+    - <<: *if-dev-push
+      changes: *patterns-component_ut
+
 .rules:test:component_ut-esp32s2:
   rules:
     - <<: *if-revert-branch
@@ -2089,6 +2166,19 @@
     - <<: *if-dev-push
       changes: *patterns-custom_test
 
+.rules:test:custom_test-esp32p4:
+  rules:
+    - <<: *if-revert-branch
+      when: never
+    - <<: *if-protected
+    - <<: *if-label-build-only
+      when: never
+    - <<: *if-label-custom_test
+    - <<: *if-label-custom_test_esp32p4
+    - <<: *if-label-target_test
+    - <<: *if-dev-push
+      changes: *patterns-custom_test
+
 .rules:test:custom_test-esp32s2:
   rules:
     - <<: *if-revert-branch
@@ -2425,6 +2515,21 @@
     - <<: *if-dev-push
       changes: *patterns-target_test-adc
 
+.rules:test:example_test-esp32p4:
+  rules:
+    - <<: *if-revert-branch
+      when: never
+    - <<: *if-protected
+    - <<: *if-label-build-only
+      when: never
+    - <<: *if-label-example_test
+    - <<: *if-label-example_test_esp32p4
+    - <<: *if-label-target_test
+    - <<: *if-dev-push
+      changes: *patterns-build-example_test
+    - <<: *if-dev-push
+      changes: *patterns-example_test
+
 .rules:test:example_test-esp32s2:
   rules:
     - <<: *if-revert-branch

.gitlab/ci/target-test.yml

@@ -247,6 +247,15 @@ pytest_examples_esp32h2_generic:
       artifacts: false
   tags: [ esp32h2, generic ]
 
+pytest_examples_esp32p4_generic:
+  extends:
+    - .pytest_examples_dir_template
+    - .rules:test:example_test-esp32p4
+  needs:
+    - job: build_pytest_examples_esp32p4
+      artifacts: false
+  tags: [ esp32p4, generic ]
+
 pytest_examples_esp32_ethernet_ota:
   extends:
     - .pytest_examples_dir_template
@@ -1253,6 +1262,16 @@ pytest_components_esp32h2_generic:
   tags: [ esp32h2, generic ]
   parallel: 2
 
+pytest_components_esp32p4_generic:
+  extends:
+    - .pytest_components_dir_template
+    - .rules:test:component_ut-esp32p4
+  needs:
+    - job: build_pytest_components_esp32p4
+      artifacts: false
+  tags: [ esp32p4, generic ]
+  parallel: 2
+
 pytest_components_esp32h2_generic_multi_device:
   extends:
     - .pytest_components_dir_template
@@ -1522,6 +1541,15 @@ pytest_test_apps_esp32h2_generic:
       artifacts: false
   tags: [ esp32h2, generic ]
 
+pytest_test_apps_esp32p4_generic:
+  extends:
+    - .pytest_test_apps_dir_template
+    - .rules:test:custom_test-esp32p4
+  needs:
+    - job: build_pytest_test_apps_esp32p4
+      artifacts: false
+  tags: [ esp32p4, generic ]
+
 pytest_test_apps_esp32s3_mspi_f8r8:
   extends:
     - .pytest_test_apps_dir_template

components/app_update/test_apps/pytest_app_update_ut.py

@@ -19,7 +19,7 @@ def run_multiple_stages(dut: Dut, test_case_num: int, stages: int) -> None:
 
 
 @pytest.mark.supported_targets
-@pytest.mark.temp_skip_ci(targets=['esp32c6', 'esp32h2'], reason='c6/h2 support TBD')
+@pytest.mark.temp_skip_ci(targets=['esp32c6', 'esp32h2', 'esp32p4'], reason='c6/h2 support TBD')
 @pytest.mark.generic
 def test_app_update(dut: Dut) -> None:
     extra_data = dut.parse_test_menu()

components/driver/test_apps/legacy_i2c_driver/pytest_i2c_legacy.py

@@ -6,6 +6,7 @@ from pytest_embedded import Dut
 
 
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='esp32p4 support TBD')
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/driver/test_apps/legacy_mcpwm_driver/pytest_legacy_mcpwm.py

@@ -9,6 +9,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/driver/test_apps/legacy_pcnt_driver/pytest_legacy_pcnt.py

@@ -10,6 +10,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/driver/test_apps/legacy_rmt_driver/pytest_legacy_rmt_driver.py

@@ -11,6 +11,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize('config', [
     'release',

components/driver/test_apps/legacy_rtc_temp_driver/pytest_legacy_temp_sensor_driver.py

@@ -11,6 +11,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c2
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize('config', [
     'release',

components/driver/test_apps/legacy_sigma_delta_driver/pytest_legacy_sigma_delta.py

@@ -11,6 +11,7 @@ from pytest_embedded_idf import IdfDut
 @pytest.mark.esp32h2
 @pytest.mark.esp32s2
 @pytest.mark.esp32s3
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/efuse/test_apps/.build-test-rules.yml

@@ -2,8 +2,8 @@
 
 components/efuse/test_apps:
   disable_test:
-    - if: IDF_TARGET in ["esp32s2", "esp32s3"]
+    - if: IDF_TARGET in ["esp32s2", "esp32s3", "esp32p4"]
       temporary: true
-      reason: eFuse for S2 and S3 is similar to the C3 chip, so we only test for C3.
+      reason: eFuse for S2 and S3 is similar to the C3 chip, so we only test for C3. P4 not tested yet.
   disable:
     - if: SOC_EFUSE_SUPPORTED != 1

components/esp_driver_i2c/test_apps/i2c_test_apps/pytest_i2c.py

@@ -7,6 +7,7 @@ from pytest_embedded import Dut
 
 @pytest.mark.supported_targets
 @pytest.mark.generic
+@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='esp32p4 support TBD')
 @pytest.mark.parametrize(
     'config',
     [

components/esp_driver_mcpwm/test_apps/mcpwm/pytest_mcpwm.py

@@ -9,6 +9,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/esp_driver_pcnt/test_apps/pulse_cnt/pytest_pulse_cnt.py

@@ -10,6 +10,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/esp_driver_rmt/test_apps/rmt/pytest_rmt.py

@@ -10,6 +10,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/esp_driver_sdm/test_apps/sigma_delta/pytest_sigma_delta.py

@@ -17,6 +17,7 @@ CONFIGS = [
 @pytest.mark.esp32s2
 @pytest.mark.esp32s3
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize('config', CONFIGS, indirect=True)
 def test_sdm(dut: IdfDut) -> None:

components/esp_driver_sdmmc/test_apps/.build-test-rules.yml

@@ -1,6 +1,11 @@
 components/esp_driver_sdmmc/test_apps/sdmmc:
   disable:
     - if: SOC_SDMMC_HOST_SUPPORTED != 1
+  disable_test:
+    - if: IDF_TARGET == "esp32p4"
+      temporary: true
+      reason: lack of runner
+
   depends_components:
     - sdmmc
     - esp_driver_sdmmc

components/esp_driver_spi/test_apps/spi/slave_hd/pytest_spi_slave_hd.py

@@ -11,6 +11,7 @@ import pytest
 @pytest.mark.esp32c3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_slave_hd_single_dev(case_tester) -> None:       # type: ignore
     for case in case_tester.test_menu:

components/esp_driver_tsens/test_apps/temperature_sensor/pytest_temperature_sensor.py

@@ -12,6 +12,7 @@ from pytest_embedded_idf.unity_tester import CaseTester
 @pytest.mark.esp32c2
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize('config', [
     'release',
@@ -22,6 +23,7 @@ def test_temperature_sensor_driver(dut: Dut) -> None:
 
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize('config', [
     'iram_safe',

components/esp_hw_support/test_apps/dma/pytest_dma.py

@@ -10,6 +10,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/esp_hw_support/test_apps/etm/pytest_etm.py

@@ -7,6 +7,7 @@ from pytest_embedded import Dut
 
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/esp_hw_support/test_apps/rtc_clk/pytest_rtc_clk.py

@@ -33,6 +33,6 @@ def test_rtc_no_xtal32k(dut: Dut) -> None:
 
 @pytest.mark.generic
 @pytest.mark.supported_targets
-@pytest.mark.temp_skip_ci(targets=['esp32c6', 'esp32h2'], reason='c6/h2 support TBD')
+@pytest.mark.temp_skip_ci(targets=['esp32c6', 'esp32h2', 'esp32p4'], reason='c6/h2/p4 support TBD')
 def test_rtc_calib(case_tester: Any) -> None:
     case_tester.run_all_multi_stage_cases()

components/esp_rom/test_apps/rom_tests/pytest_esp_rom.py

@@ -10,6 +10,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_esp_rom(dut: Dut) -> None:
     dut.run_all_single_board_cases()

components/esp_timer/test_apps/pytest_esp_timer_ut.py

@@ -1,12 +1,12 @@
-# SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
+# SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
 # SPDX-License-Identifier: Unlicense OR CC0-1.0
 
 import pytest
 from pytest_embedded import Dut
 
 CONFIGS = [
-    pytest.param('general', marks=[pytest.mark.supported_targets, pytest.mark.temp_skip_ci(targets=['esp32h2'], reason='h2 support TBD')]),
-    pytest.param('release', marks=[pytest.mark.supported_targets, pytest.mark.temp_skip_ci(targets=['esp32h2'], reason='h2 support TBD')]),
+    pytest.param('general', marks=[pytest.mark.supported_targets, pytest.mark.temp_skip_ci(targets=['esp32h2', 'esp32p4'], reason='h2/p4 support TBD')]),
+    pytest.param('release', marks=[pytest.mark.supported_targets, pytest.mark.temp_skip_ci(targets=['esp32h2', 'esp32p4'], reason='h2/p4 support TBD')]),
     pytest.param('single_core', marks=[pytest.mark.esp32]),
     pytest.param('freertos_compliance', marks=[pytest.mark.esp32]),
     pytest.param('isr_dispatch_esp32', marks=[pytest.mark.esp32]),

components/newlib/test_apps/newlib/pytest_newlib.py

@@ -31,6 +31,7 @@ def validate_sbom(dut: Dut) -> None:
         assert toolchain_newlib_version == sbom_newlib_version, 'toolchain_newlib_version != sbom_newlib_version'
 
 
+@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='esp32p4 support TBD')
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/spi_flash/test_apps/esp_flash/pytest_esp_flash.py

@@ -6,6 +6,7 @@ from pytest_embedded import Dut
 
 
 @pytest.mark.supported_targets
+@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='esp32p4 support TBD')
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

components/ulp/test_apps/.build-test-rules.yml

@@ -3,6 +3,10 @@
 components/ulp/test_apps/lp_core:
   disable:
     - if: SOC_LP_CORE_SUPPORTED != 1
+  disable_test:
+    - if: IDF_TARGET in ["esp32p4"]
+      temporary: true
+      reason: not tested yet
   depends_components:
     - ulp
 

examples/build_system/.build-test-rules.yml

@@ -2,7 +2,7 @@
 
 examples/build_system/cmake/import_lib:
   disable_test:
-    - if: IDF_TARGET in ["esp32c2", "esp32c3", "esp32s2", "esp32s3", "esp32c6", "esp32h2"]
+    - if: IDF_TARGET in ["esp32c2", "esp32c3", "esp32s2", "esp32s3", "esp32c6", "esp32h2", "esp32p4"]
       temporary: true
       reason: lack of runners
 

examples/get-started/blink/pytest_blink.py

@@ -8,6 +8,7 @@ import pytest
 from pytest_embedded_idf.dut import IdfDut
 
 
+@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='esp32p4 support TBD')
 @pytest.mark.supported_targets
 @pytest.mark.generic
 def test_blink(dut: IdfDut) -> None:

examples/peripherals/mcpwm/mcpwm_capture_hc_sr04/pytest_hc_sr04.py

@@ -9,6 +9,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_hc_sr04_example(dut: Dut) -> None:
     dut.expect_exact('example: Install capture timer')

examples/peripherals/mcpwm/mcpwm_servo_control/pytest_servo_mg996r.py

@@ -9,6 +9,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_servo_mg996r_example(dut: Dut) -> None:
     dut.expect_exact('example: Create timer and operator')

examples/peripherals/mcpwm/mcpwm_sync/pytest_mcpwm_sync.py

@@ -9,6 +9,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 @pytest.mark.parametrize('config', [
     pytest.param('gpio', marks=[pytest.mark.esp32, pytest.mark.esp32s3]),

examples/peripherals/pcnt/rotary_encoder/pytest_rotary_encoder.py

@@ -10,6 +10,7 @@ from pytest_embedded.dut import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_rotary_encoder(dut: Dut) -> None:
     dut.expect_exact('install pcnt unit')

examples/peripherals/rmt/dshot_esc/pytest_dshot_esc.py

@@ -11,6 +11,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_dshot_esc_example(dut: Dut) -> None:
     dut.expect_exact('example: Create RMT TX channel')

examples/peripherals/rmt/led_strip/pytest_led_strip.py

@@ -11,6 +11,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_led_strip_example(dut: Dut) -> None:
     dut.expect_exact('example: Create RMT TX channel')

examples/peripherals/rmt/musical_buzzer/pytest_musical_buzzer.py

@@ -10,6 +10,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_musical_buzzer_example(dut: Dut) -> None:
     dut.expect_exact('example: Create RMT TX channel')

examples/peripherals/rmt/onewire/pytest_onewire.py

@@ -10,6 +10,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_onewire_example(dut: Dut) -> None:
     dut.expect_exact('example: 1-Wire bus installed on GPIO')

examples/peripherals/rmt/stepper_motor/pytest_stepper_motor.py

@@ -8,6 +8,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32s3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_stepper_motor_example(dut: Dut) -> None:
     dut.expect_exact('example: Initialize EN + DIR GPIO')

examples/peripherals/sigma_delta/sdm_dac/pytest_sdm_dac_example.py

@@ -11,6 +11,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_sdm_dac_example(dut: Dut) -> None:
     dut.expect(r'sdm_dac: Sigma-delta output is attached to GPIO \w+')

examples/peripherals/sigma_delta/sdm_led/pytest_sdm_led_example.py

@@ -11,6 +11,7 @@ from pytest_embedded import Dut
 @pytest.mark.esp32c3
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_sdm_led_example(dut: Dut) -> None:
     dut.expect_exact('sdm_led: Install sigma delta channel')

examples/peripherals/temperature_sensor/temp_sensor/pytest_temp_sensor_example.py

@@ -11,6 +11,7 @@ from pytest_embedded.dut import Dut
 @pytest.mark.esp32c2
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_temp_sensor_example(dut: Dut) -> None:
     dut.expect_exact('Install temperature sensor')

examples/peripherals/temperature_sensor/temp_sensor_monitor/pytest_temp_sensor_monitor_example.py

@@ -7,6 +7,7 @@ from pytest_embedded.dut import Dut
 
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_temp_sensor_monitor_example(dut: Dut) -> None:
     dut.expect_exact('Install temperature sensor')

examples/peripherals/timer_group/gptimer_capture_hc_sr04/pytest_gptimer_capture_example.py

@@ -7,6 +7,7 @@ from pytest_embedded import Dut
 
 @pytest.mark.esp32c6
 @pytest.mark.esp32h2
+@pytest.mark.esp32p4
 @pytest.mark.generic
 def test_gptimer_capture(dut: Dut) -> None:
     dut.expect_exact('Configure trig gpio')

examples/system/.build-test-rules.yml

@@ -2,9 +2,9 @@
 
 examples/system/app_trace_basic:
   disable:
-    - if: IDF_TARGET == "esp32c6" or IDF_TARGET == "esp32h2"
+    - if: IDF_TARGET in ["esp32c6", "esp32h2", "esp32p4"]
       temporary: true
-      reason: target esp32c6, esp32h2 is not supported yet
+      reason: target esp32c6, esp32h2, esp32p4 is not supported yet
 
 examples/system/base_mac_address:
   depends_components:

examples/system/app_trace_basic/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- |
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-S2 | ESP32-S3 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- |
 
 # Application Level Tracing Example (Basic)
 

examples/system/esp_timer/pytest_esp_timer.py

@@ -29,7 +29,7 @@ ONE_SHOT_TIMER_PERIOD = 5000000
 
 
 @pytest.mark.supported_targets
-@pytest.mark.temp_skip_ci(targets=['esp32c6', 'esp32h2'], reason='c6/h2 support TBD')
+@pytest.mark.temp_skip_ci(targets=['esp32c6', 'esp32h2', 'esp32p4'], reason='c6/h2/p4 support TBD')
 @pytest.mark.generic
 @pytest.mark.parametrize(
     'config',

examples/system/light_sleep/pytest_light_sleep.py

@@ -8,6 +8,7 @@ import pytest
 from pytest_embedded import Dut
 
 
+@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='esp32p4 support TBD')
 @pytest.mark.supported_targets
 @pytest.mark.generic
 def test_light_sleep(dut: Dut) -> None:

tools/ci/idf_pytest/constants.py

@@ -11,7 +11,7 @@ from dataclasses import dataclass
 from _pytest.python import Function
 from pytest_embedded.utils import to_list
 
-SUPPORTED_TARGETS = ['esp32', 'esp32s2', 'esp32c3', 'esp32s3', 'esp32c2', 'esp32c6', 'esp32h2']
+SUPPORTED_TARGETS = ['esp32', 'esp32s2', 'esp32c3', 'esp32s3', 'esp32c2', 'esp32c6', 'esp32h2', 'esp32p4']
 PREVIEW_TARGETS: t.List[str] = []  # this PREVIEW_TARGETS excludes 'linux' target
 DEFAULT_SDKCONFIG = 'default'
 

tools/test_apps/peripherals/i2c_wifi/pytest_i2c_wifi.py

@@ -6,7 +6,7 @@ from pytest_embedded_idf.dut import IdfDut
 
 
 @pytest.mark.supported_targets
-@pytest.mark.temp_skip_ci(targets=['esp32h2'], reason='h2 does not support wifi')
+@pytest.mark.temp_skip_ci(targets=['esp32h2', 'esp32p4'], reason='h2/p4 does not support wifi')
 @pytest.mark.generic
 def test_i2c_wifi_startup(dut: IdfDut) -> None:
     dut.expect_exact('I2C-WIFI test success')

tools/test_apps/phy/phy_multi_init_data_test/pytest_phy_multi_init_data.py

@@ -6,7 +6,7 @@ from pytest_embedded_idf.dut import IdfDut
 
 
 @pytest.mark.supported_targets
-@pytest.mark.temp_skip_ci(targets=['esp32h2'], reason='h2 not supported')
+@pytest.mark.temp_skip_ci(targets=['esp32h2', 'esp32p4'], reason='h2/p4 not supported')
 @pytest.mark.generic
 @pytest.mark.parametrize('config', [
     'phy_multiple_init_data',

tools/test_apps/system/gdbstub_runtime/pytest_runtime.py

@@ -19,6 +19,7 @@ def get_line_number(lookup: str, offset: int = 0) -> int:
     return -1
 
 
+@pytest.mark.temp_skip_ci(targets=['esp32p4'], reason='esp32p4 support TBD')
 @pytest.mark.supported_targets
 @pytest.mark.generic
 def test_gdbstub_runtime(dut: PanicTestDut) -> None: