sane-st400.5



sane-st400(5)            SANE Scanner Access Now Easy            sane-st400(5)


NAME

       sane-st400 - SANE backend for Siemens ST/Highscan flatbed scanners


DESCRIPTION

       The  sane-st400  library  implements  a  SANE (Scanner Access Now Easy)
       backend that provides access to Siemens ST400 flatbed scanners and com-
       patibles.   At  present,  the  following scanners are supported by this
       backend:

              Siemens ST400 (6 bit gray scale)
              Siemens ST800 (6 bit gray scale)

       The driver supports line art and gray scans up to 8bpp.

       The Siemens ST/Highscan series includes several more models,  e.g.  the
       ST300  and ST600.  If you own one of these scanners, or a scanner other
       than the ones listed above that works with this backend, please let  us
       know  by  sending the scanner's model name, SCSI ID, and firmware revi-
       sion   to   sane-devel@alioth-lists.debian.net.    Have   a   look   at
       http://www.sane-project.org/mailing-lists.html  concerning subscription
       to sane-devel.


DEVICE NAMES

       This backend expects device names of the form:

              special

       Where special is the path-name for the special device that  corresponds
       to a SCSI scanner. For SCSI scanners, the special device name must be a
       generic SCSI device or a symlink to such a device.  Under Linux, such a
       device   name   could  be  /dev/sga  or  /dev/sge,  for  example.   See
       sane-scsi(5) for details.


CONFIGURATION

       The contents of the st400.conf file is a list of device names that cor-
       respond  to  Siemens  scanners.   Empty lines and lines starting with a
       hash mark (#) are ignored.  A sample configuration file is shown below:

              /dev/scanner
              # this is a comment
              /dev/sge

       The default configuration file that is distributed with SANE looks like
       this:

              scsi SIEMENS "ST 400" Scanner * * 3 0

       In  this  configuration,  the driver can only access the ST400 model at
       SCSI ID 3 LUN 0 (see section BUGS below for the reason).   To  use  the
       driver  with  other scanner models, add an appropriate line to the con-
       figuration file.  For example, to use it with an ST800 at SCSI ID 3 LUN
       0, add the line:

              scsi SIEMENS "ST 800" Scanner * * 3 0


FILES

       /usr/local/etc/sane.d/st400.conf
              The   backend   configuration  file  (see  also  description  of
              SANE_CONFIG_DIR below).

       /usr/local/lib/sane/libsane-st400.a
              The static library implementing this backend.

       /usr/local/lib/sane/libsane-st400.so
              The shared library implementing this backend (present on systems
              that support dynamic loading).


ENVIRONMENT

       SANE_CONFIG_DIR
              This environment variable specifies the list of directories that
              may contain the configuration file.  On *NIX systems, the direc-
              tories are separated by a colon (`:'), under OS/2, they are sep-
              arated by a semi-colon (`;').  If this variable is not set,  the
              configuration  file  is  searched  in  two  default directories:
              first, the current working directory (".") and then in  /usr/lo-
              cal/etc/sane.d.   If  the value of the environment variable ends
              with the directory separator character, then the default  direc-
              tories  are searched after the explicitly specified directories.
              For example, setting SANE_CONFIG_DIR to "/tmp/config:" would re-
              sult in directories tmp/config, ., and /usr/local/etc/sane.d be-
              ing searched (in this order).

       SANE_DEBUG_ST400
              If the library was compiled with debug support enabled, this en-
              vironment  variable  controls  the debug level for this backend.
              E.g., a value of 128 requests all debug output  to  be  printed.
              Smaller levels reduce verbosity.


MISSING FUNCTIONALITY

       Everything but the most basic stuff.


BUGS

       Currently,  the backend does not check if the attached device really is
       a ST400.  It will happily accept everything that matches the configura-
       tion  entries.  This makes it easy to test the backend with other scan-
       ners: Just add an appropriate line to the configuration file.  The con-
       figuration  file  as distributed (see above) only works with the ST400.
       Be careful: If there is no config file at all, the backend defaults  to
       /dev/scanner.

       The ST400 answers on all eight SCSI LUNs.  Normally this is not a prob-
       lem, as LUN support is usually disabled in SCSI drivers, but if you are
       seeing  multiple instances of the scanner in a device list, either dis-
       able LUNs in your SCSI setup or change the entry in  the  configuration
       file to match LUN 0 only.


DEBUG

       If  you  encounter  a  bug please set the environment variable SANE_DE-
       BUG_ST400 to 128 and try to regenerate the problem. Then send me a  re-
       port with the log attached.

       If  you  encounter  a SCSI bus error or trimmed and/or displaced images
       please also set the environment variable SANE_DEBUG_SANEI_SCSI  to  128
       before sending me the report.


SEE ALSO

       sane(7), sane-scsi(5)
       http://www.informatik.uni-oldenburg.de/~ingo/sane/


AUTHOR

       Ingo Wilken <Ingo.Wilken@informatik.uni-oldenburg.de>

                                  14 Jul 2008                    sane-st400(5)

Man(1) output converted with man2html