sane-ma1509.5



sane-ma1509(5)           SANE Scanner Access Now Easy           sane-ma1509(5)


NAME

       sane-ma1509 - SANE backend for Mustek BearPaw 1200F USB scanner


DESCRIPTION

       The  sane-ma1509  library  implements  a SANE (Scanner Access Now Easy)
       backend that provides access to the Mustek BearPaw  1200F  USB  flatbed
       scanner.  This  scanner is based on the MA-1509 chipset. Other scanners
       that use this chip (if they exist) may also work.

       This backend is ALPHA software.  Be careful and remove the  power  plug
       immediately if your hear unusual noises.

       More   details  can  be  found  on  the  sane-ma1509  backend  homepage
       http://www.meier-geinitz.de/sane/ma1509-backend/.

       Other Mustek USB scanners  are  supported  by  the  sane-mustek_usb(5),
       sane-gt68xx(5) and sane-plustek(5) backends.

       This  backend  can only work with scanners that are already detected by
       the operating system. See sane-usb(5) for details.

       If you own a scanner other than the Mustek  BearPaw  1200F  that  works
       with this backend, please let me know this by sending the scanner's ex-
       act  model  name  and  the  USB  vendor  and  device  ids  (e.g.   from
       /proc/bus/usb/devices or syslog) to me.


DEVICE NAMES

       This backend expects device names of the form:

              special

       Where special is a path-name for the special device that corresponds to
       a USB scanner.  With Linux, such a device name could be  /dev/usb/scan-
       ner0 or libusb:001:002, for example.


CONFIGURATION

       The  contents  of  the ma1509.conf file is a list of options and device
       names that correspond to Mustek BearPaw 1200F  scanners.   Empty  lines
       and lines starting with a hash mark (#) are ignored.

       Instead  of  using  the device name, the scanner can be autodetected by
       usb vendor_id product_id statements which  are  already  included  into
       ma1509.conf.   This  is  only supported with Linux 2.4.8 and higher and
       all systems that support libsub. "vendor_id" and "product_id" are hexa-
       decimal  numbers that identify the scanner. If this doesn't work, a de-
       vice name must be placed in ma1509.conf as described above.

       To set the time the lamp needs for warm-up, use option  warmup-time  in
       ma1509.conf.   The  time  is given in seconds after the option. The de-
       fault is 30 seconds.


FILES

       /usr/local/etc/sane.d/ma1509.conf
              The  backend  configuration  file  (see  also   description   of
              SANE_CONFIG_DIR below).

       /usr/local/lib/sane/libsane-ma1509.a
              The static library implementing this backend.

       /usr/local/lib/sane/libsane-ma1509.so
              The shared library implementing this backend (present on systems
              that support dynamic loading).


ENVIRONMENT

       SANE_CONFIG_DIR
              This environment variable specifies the list of directories that
              may contain the configuration file.  On *NIX systems, the direc-
              tories are separated by a colon (`:'), under OS/2, they are sep-
              arated  by a semi-colon (`;').  If this variable is not set, the
              configuration file  is  searched  in  two  default  directories:
              first,  the current working directory (".") and then in /usr/lo-
              cal/etc/sane.d.  If the value of the environment  variable  ends
              with  the directory separator character, then the default direc-
              tories are searched after the explicitly specified  directories.
              For example, setting SANE_CONFIG_DIR to "/tmp/config:" would re-
              sult in directories tmp/config, ., and /usr/local/etc/sane.d be-
              ing searched (in this order).

       SANE_DEBUG_MA1509
              If the library was compiled with debug support enabled, this en-
              vironment variable controls the debug level  for  this  backend.
              Higher debug levels increase the verbosity of the output.


SEE ALSO

       sane(7),       sane-usb(5),       sane-gt68xx(5),      sane-plustek(5),
       sane-mustek_usb(5), sane-mustek(5), sane-mustek_pp(5),
       http://www.meier-geinitz.de/sane/ma1509-backend/


AUTHOR

       Henning Meier-Geinitz <henning@meier-geinitz.de>


BUGS

       Resolutions higher than 600 dpi don't work
       Transparency adapter and automatic document feeder is not supported yet
       No support for "high-speed" mode (jpeg)

       More detailed bug information is available at the MA-1509 backend home-
       page http://www.meier-geinitz.de/sane/ma1509-backend/.

                                  13 Jul 2008                   sane-ma1509(5)

Man(1) output converted with man2html