mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
micropython/ports/mimxrt
Historia
Damien George 8f4c108025 all: Remove MICROPY_PY_IO_FILEIO config option. 
Since commit e65d1e69e8 there is no longer an
io.FileIO class, so this option is no longer needed.

This option also controlled whether or not files supported being opened in
binary mode (eg 'rb'), and could, if disabled, lead to confusion as to why
opening a file in binary mode silently did the wrong thing (it would just
open in text mode if MICROPY_PY_IO_FILEIO was disabled).

The various VFS implementations (POSIX, FAT, LFS) were the only places
where enabling this option made a difference, and in almost all cases where
one of these filesystems were enabled, MICROPY_PY_IO_FILEIO was also
enabled.  So it makes sense to just unconditionally enable this feature
(ability to open a file in binary mode) in all cases, and so just remove
this config option altogether.  That makes configuration simpler and means
binary file support always exists (and opening a file in binary mode is
arguably more fundamental than opening in text mode, so if anything should
be configurable then it should be the ability to open in text mode).

Signed-off-by: Damien George <damien@micropython.org>
 		2022-08-18 11:54:17 +10:00
..
boards mimxrt: Use MP_REGISTER_ROOT_POINTER(). 2022-07-18 13:50:34 +10:00
hal drivers,ports: Fix a few typos in comments. 2022-07-23 23:24:24 +10:00
lwip_inc mimxrt: Re-Enable eth checksum creation by HW. 2021-12-14 08:07:52 +01:00
mbedtls mimxrt/mbedtls: Use core-provided tracked alloc instead of custom funcs. 2022-05-05 10:31:50 +10:00
modules mimxrt/modules: Append /flash/lib to the default sys.path. 2022-04-11 12:25:15 +10:00
Makefile ports: Always append to GIT_SUBMODULES. 2022-08-03 00:05:26 +10:00
README.md mimxrt: Extend the help() message and README.md. 2021-10-25 23:52:08 +11:00
board_init.c mimxrt/Makefile: Modify handling of SDRAM option. 2022-06-24 17:58:27 +10:00
dma_manager.c mixmrt/machine_i2s: Add I2S protocol support. 2022-03-30 14:12:40 +11:00
dma_manager.h mixmrt/machine_i2s: Add I2S protocol support. 2022-03-30 14:12:40 +11:00
eth.c mimxrt: Update port to work with new nxp_driver v2.10. 2022-06-03 10:48:49 +10:00
eth.h mimxrt: Add a driver for the DP83848 PHY device. 2021-12-14 08:07:52 +01:00
fatfs_port.c mimxrt/sdcard: Implement SDCard driver. 2021-09-07 20:45:33 +02:00
led.c mimxrt: Implement machine.Pin class. 2021-05-26 00:12:42 +10:00
led.h mimxrt: Implement machine.Pin class. 2021-05-26 00:12:42 +10:00
machine_adc.c all: Use mp_obj_malloc everywhere it's applicable. 2022-05-03 22:28:14 +10:00
machine_bitstream.c mimxrt: Fix cycle counter for time.ticks_cpu() and machine.bitstream(). 2021-10-25 15:50:44 +11:00
machine_i2c.c mimxrt: Update port to work with new nxp_driver v2.10. 2022-06-03 10:48:49 +10:00
machine_i2s.c mimxrt: Use MP_REGISTER_ROOT_POINTER(). 2022-07-18 13:50:34 +10:00
machine_led.c mimxrt/machine_led: Use mp_raise_msg_varg helper. 2021-07-15 00:12:41 +10:00
machine_pin.c mimxrt: Use MP_REGISTER_ROOT_POINTER(). 2022-07-18 13:50:34 +10:00
machine_pwm.c all: Use mp_obj_malloc everywhere it's applicable. 2022-05-03 22:28:14 +10:00
machine_rtc.c mimxrt/machine_rtc: Start RTC at boot and set datetime if not set. 2022-04-11 12:25:23 +10:00
machine_sdcard.c mimxrt/sdcard: Implement SDCard driver. 2021-09-07 20:45:33 +02:00
machine_spi.c mimxrt: Update port to work with new nxp_driver v2.10. 2022-06-03 10:48:49 +10:00
machine_timer.c mimxrt: Use MP_REGISTER_ROOT_POINTER(). 2022-07-18 13:50:34 +10:00
machine_uart.c mimxrt/machine_uart: Fix an inconsistency for UART.init() arg handling. 2022-06-07 18:21:46 +10:00
machine_wdt.c mimxrt/modmachine: Implement machine.WDT() and machine.reset_cause(). 2021-10-25 15:43:56 +11:00
main.c mixmrt/machine_i2s: Add I2S protocol support. 2022-03-30 14:12:40 +11:00
mimxrt_flash.c mimxrt: Use -Og instead of -O0 for DEBUG builds. 2021-12-14 08:07:52 +01:00
mimxrt_sdram.c mimxrt/sdram: Add SDRAM support. 2021-10-22 08:23:24 +02:00
modmachine.c all: Remove third argument to MP_REGISTER_MODULE. 2022-06-02 16:31:37 +10:00
modmachine.h mimxrt/machine_rtc: Start RTC at boot and set datetime if not set. 2022-04-11 12:25:23 +10:00
modmimxrt.c all: Remove third argument to MP_REGISTER_MODULE. 2022-06-02 16:31:37 +10:00
modmimxrt.h mimxrt: Add flash storage support with VFS and littlefs filesystem. 2021-06-01 23:42:57 +10:00
moduos.c mimxrt/moduos: Convert module to use extmod version. 2022-03-09 10:03:23 +11:00
modutime.c all: Remove third argument to MP_REGISTER_MODULE. 2022-06-02 16:31:37 +10:00
mpconfigport.h all: Remove MICROPY_PY_IO_FILEIO config option. 2022-08-18 11:54:17 +10:00
mphalport.c mimxrt/mphalport: Fix strict aliasing error with unique id. 2022-06-02 12:50:14 +10:00
mphalport.h mimxrt: Refactor the reading of the machine id. 2021-12-14 08:07:52 +01:00
mpnetworkport.c mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
network_lan.c mimxrt: Add a driver for the DP83848 PHY device. 2021-12-14 08:07:52 +01:00
pendsv.c mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
pendsv.h mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
pin.c mimxrt/machine_pin: Change pin drive constants to DRIVE_x naming. 2022-03-08 22:30:33 +11:00
pin.h mimxrt/machine_pin: Change pin drive constants to DRIVE_x naming. 2022-03-08 22:30:33 +11:00
qstrdefsport.h mimxrt: Add new, minimal port to NXP i.MX RT series CPUs. 2020-03-11 15:34:13 +11:00
sdcard.c mimxrt: Update port to work with new nxp_driver v2.10. 2022-06-03 10:48:49 +10:00
sdcard.h mimxrt/sdcard: Implement SDCard driver. 2021-09-07 20:45:33 +02:00
systick.c mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
systick.h mimxrt/eth: Add LAN support and integrate the network module. 2021-10-25 15:14:26 +11:00
ticks.c mimxrt: Enable ticks_cpu at boot time for NDEBUG builds only. 2021-12-14 08:07:52 +01:00
ticks.h mimxrt: Improve ticks and sleep functions using GPT. 2021-05-18 22:36:32 +10:00
tusb_config.h ports: Update to build with new tinyusb. 2021-02-12 12:50:36 +11:00
tusb_port.c mimxrt: Add USB ID elements. 2022-01-27 17:05:34 +11:00

README.md

Port of MicroPython to NXP iMX RT 10xx

Currently supports Teensy 4.0, Teensy 4.1, and the MIMXRT1010_EVK, MIMXRT1020_EVK, MIMXRT1050_EVK, MIMXRT1060_EVK and MIMXRT1064_EVK boards.

Features:

  • REPL over USB VCP
  • machine.ADC
  • machine.I2C
  • machine.LED
  • machine.Pin
  • machine.PWM
  • machine.RTC
  • machine.SDCard
  • machine.SPI
  • machine.Signal
  • machine.SoftI2C
  • machine.SoftSPI
  • machine.Timer
  • machine.UART
  • LFS2 file system at the internal Flash
  • SDCard support (not on MIMXRT1010_EVK)
  • Ethernet (not on Teensy 4.0 and MIMXRT1010_EVK)

Known issues:

TODO:

  • More peripherals (Counter, I2S, CAN, etc)
  • More Python options