mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
micropython/ports/stm32/sdcard.c

915 wiersze
31 KiB
C
Czysty Bezpośredni odnośnik Wina Historia

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013-2019 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <string.h>
#include "py/runtime.h"
#include "py/mphal.h"
#include "lib/oofatfs/ff.h"
#include "extmod/vfs_fat.h"
#include "sdcard.h"
#include "pin.h"
#include "pin_static_af.h"
#include "bufhelper.h"
#include "dma.h"
#include "irq.h"
#if MICROPY_HW_ENABLE_SDCARD || MICROPY_HW_ENABLE_MMCARD
#if defined(STM32F7) || defined(STM32H5) || defined(STM32H7) || defined(STM32L4)
// The H7/F7/L4 have 2 SDMMC peripherals, but at the moment this driver only supports
// using one of them in a given build, selected by MICROPY_HW_SDCARD_SDMMC.
#if MICROPY_HW_SDCARD_SDMMC == 2
#define SDIO SDMMC2
#define SDMMC_IRQHandler SDMMC2_IRQHandler
#define SDMMC_CLK_ENABLE() __HAL_RCC_SDMMC2_CLK_ENABLE()
#define SDMMC_CLK_DISABLE() __HAL_RCC_SDMMC2_CLK_DISABLE()
#define SDMMC_FORCE_RESET() __HAL_RCC_SDMMC2_FORCE_RESET()
#define SDMMC_RELEASE_RESET() __HAL_RCC_SDMMC2_RELEASE_RESET()
#define SDMMC_IRQn SDMMC2_IRQn
#define SDMMC_DMA dma_SDMMC_2
#define STATIC_AF_SDCARD_CK STATIC_AF_SDMMC2_CK
#define STATIC_AF_SDCARD_CMD STATIC_AF_SDMMC2_CMD
#define STATIC_AF_SDCARD_D0 STATIC_AF_SDMMC2_D0
#define STATIC_AF_SDCARD_D1 STATIC_AF_SDMMC2_D1
#define STATIC_AF_SDCARD_D2 STATIC_AF_SDMMC2_D2
#define STATIC_AF_SDCARD_D3 STATIC_AF_SDMMC2_D3
#define STATIC_AF_SDCARD_D4 STATIC_AF_SDMMC2_D4
#define STATIC_AF_SDCARD_D5 STATIC_AF_SDMMC2_D5
#define STATIC_AF_SDCARD_D6 STATIC_AF_SDMMC2_D6
#define STATIC_AF_SDCARD_D7 STATIC_AF_SDMMC2_D7
#else
#define SDIO SDMMC1
#define SDMMC_IRQHandler SDMMC1_IRQHandler
#define SDMMC_CLK_ENABLE() __HAL_RCC_SDMMC1_CLK_ENABLE()
#define SDMMC_CLK_DISABLE() __HAL_RCC_SDMMC1_CLK_DISABLE()
#define SDMMC_FORCE_RESET() __HAL_RCC_SDMMC1_FORCE_RESET()
#define SDMMC_RELEASE_RESET() __HAL_RCC_SDMMC1_RELEASE_RESET()
#define SDMMC_IRQn SDMMC1_IRQn
#define SDMMC_DMA dma_SDIO_0
#define STATIC_AF_SDCARD_CK STATIC_AF_SDMMC1_CK
#define STATIC_AF_SDCARD_CMD STATIC_AF_SDMMC1_CMD
#define STATIC_AF_SDCARD_D0 STATIC_AF_SDMMC1_D0
#define STATIC_AF_SDCARD_D1 STATIC_AF_SDMMC1_D1
#define STATIC_AF_SDCARD_D2 STATIC_AF_SDMMC1_D2
#define STATIC_AF_SDCARD_D3 STATIC_AF_SDMMC1_D3
#define STATIC_AF_SDCARD_D4 STATIC_AF_SDMMC1_D4
#define STATIC_AF_SDCARD_D5 STATIC_AF_SDMMC1_D5
#define STATIC_AF_SDCARD_D6 STATIC_AF_SDMMC1_D6
#define STATIC_AF_SDCARD_D7 STATIC_AF_SDMMC1_D7
#endif
// The F7 & L4 series calls the peripheral SDMMC rather than SDIO, so provide some
// #defines for backwards compatibility.
#define SDIO_CLOCK_EDGE_RISING SDMMC_CLOCK_EDGE_RISING
#define SDIO_CLOCK_EDGE_FALLING SDMMC_CLOCK_EDGE_FALLING
#define SDIO_CLOCK_BYPASS_DISABLE SDMMC_CLOCK_BYPASS_DISABLE
#define SDIO_CLOCK_BYPASS_ENABLE SDMMC_CLOCK_BYPASS_ENABLE
#define SDIO_CLOCK_POWER_SAVE_DISABLE SDMMC_CLOCK_POWER_SAVE_DISABLE
#define SDIO_CLOCK_POWER_SAVE_ENABLE SDMMC_CLOCK_POWER_SAVE_ENABLE
#define SDIO_BUS_WIDE_1B SDMMC_BUS_WIDE_1B
#define SDIO_BUS_WIDE_4B SDMMC_BUS_WIDE_4B
#define SDIO_BUS_WIDE_8B SDMMC_BUS_WIDE_8B
#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE SDMMC_HARDWARE_FLOW_CONTROL_DISABLE
#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDMMC_HARDWARE_FLOW_CONTROL_ENABLE
#if defined(STM32H5) || defined(STM32H7)
#define SDIO_TRANSFER_CLK_DIV SDMMC_NSpeed_CLK_DIV
#define SDIO_USE_GPDMA 0
#else
#define SDIO_TRANSFER_CLK_DIV SDMMC_TRANSFER_CLK_DIV
#define SDIO_USE_GPDMA 1
#endif
#else
// These are definitions for F4 MCUs so there is a common macro across all MCUs.
#define SDMMC_CLK_ENABLE() __SDIO_CLK_ENABLE()
#define SDMMC_CLK_DISABLE() __SDIO_CLK_DISABLE()
#define SDMMC_IRQn SDIO_IRQn
#define SDMMC_IRQHandler SDIO_IRQHandler
#define SDMMC_DMA dma_SDIO_0
#define SDIO_USE_GPDMA 1
#define STATIC_AF_SDCARD_CK STATIC_AF_SDIO_CK
#define STATIC_AF_SDCARD_CMD STATIC_AF_SDIO_CMD
#define STATIC_AF_SDCARD_D0 STATIC_AF_SDIO_D0
#define STATIC_AF_SDCARD_D1 STATIC_AF_SDIO_D1
#define STATIC_AF_SDCARD_D2 STATIC_AF_SDIO_D2
#define STATIC_AF_SDCARD_D3 STATIC_AF_SDIO_D3
#define STATIC_AF_SDCARD_D4 STATIC_AF_SDIO_D4
#define STATIC_AF_SDCARD_D5 STATIC_AF_SDIO_D5
#define STATIC_AF_SDCARD_D6 STATIC_AF_SDIO_D6
#define STATIC_AF_SDCARD_D7 STATIC_AF_SDIO_D7
#endif
// If no custom SDIO pins defined, use the default ones
#ifndef MICROPY_HW_SDCARD_CK
#define MICROPY_HW_SDCARD_D0 (pin_C8)
#define MICROPY_HW_SDCARD_D1 (pin_C9)
#define MICROPY_HW_SDCARD_D2 (pin_C10)
#define MICROPY_HW_SDCARD_D3 (pin_C11)
#define MICROPY_HW_SDCARD_CK (pin_C12)
#define MICROPY_HW_SDCARD_CMD (pin_D2)
#endif
// Define a constant to select the bus width.
#if MICROPY_HW_SDCARD_BUS_WIDTH == 4
#define SDIO_BUS_WIDE_VALUE SDIO_BUS_WIDE_4B
#elif MICROPY_HW_SDCARD_BUS_WIDTH == 8
#define SDIO_BUS_WIDE_VALUE SDIO_BUS_WIDE_8B
#endif
#define PYB_SDMMC_FLAG_SD (0x01)
#define PYB_SDMMC_FLAG_MMC (0x02)
#define PYB_SDMMC_FLAG_ACTIVE (0x04)
static uint8_t pyb_sdmmc_flags;
// TODO: I think that as an optimization, we can allocate these dynamically
// if an sd card is detected. This will save approx 260 bytes of RAM
// when no sdcard was being used.
static union {
SD_HandleTypeDef sd;
#if MICROPY_HW_ENABLE_MMCARD
MMC_HandleTypeDef mmc;
#endif
} sdmmc_handle;
void sdcard_init(void) {
// Set SD/MMC to no mode and inactive
pyb_sdmmc_flags = 0;
// configure SD GPIO
// we do this here an not in HAL_SD_MspInit because it apparently
// makes it more robust to have the pins always pulled high
// Note: the mp_hal_pin_config function will configure the GPIO in
// fast mode which can do up to 50MHz. This should be plenty for SDIO
// which clocks up to 25MHz maximum.
mp_hal_pin_config_alt_static(MICROPY_HW_SDCARD_CK, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, STATIC_AF_SDCARD_CK);
mp_hal_pin_config_alt_static(MICROPY_HW_SDCARD_CMD, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, STATIC_AF_SDCARD_CMD);
mp_hal_pin_config_alt_static(MICROPY_HW_SDCARD_D0, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, STATIC_AF_SDCARD_D0);
#if MICROPY_HW_SDCARD_BUS_WIDTH >= 4
mp_hal_pin_config_alt_static(MICROPY_HW_SDCARD_D1, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, STATIC_AF_SDCARD_D1);
mp_hal_pin_config_alt_static(MICROPY_HW_SDCARD_D2, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, STATIC_AF_SDCARD_D2);
mp_hal_pin_config_alt_static(MICROPY_HW_SDCARD_D3, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, STATIC_AF_SDCARD_D3);
#if MICROPY_HW_SDCARD_BUS_WIDTH == 8
mp_hal_pin_config_alt_static(MICROPY_HW_SDCARD_D4, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, STATIC_AF_SDCARD_D4);
mp_hal_pin_config_alt_static(MICROPY_HW_SDCARD_D5, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, STATIC_AF_SDCARD_D5);
mp_hal_pin_config_alt_static(MICROPY_HW_SDCARD_D6, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, STATIC_AF_SDCARD_D6);
mp_hal_pin_config_alt_static(MICROPY_HW_SDCARD_D7, MP_HAL_PIN_MODE_ALT, MP_HAL_PIN_PULL_UP, STATIC_AF_SDCARD_D7);
#endif
#endif
// configure the SD card detect pin
// we do this here so we can detect if the SD card is inserted before powering it on
#if defined(MICROPY_HW_SDCARD_DETECT_PIN)
mp_hal_pin_config(MICROPY_HW_SDCARD_DETECT_PIN, MP_HAL_PIN_MODE_INPUT, MICROPY_HW_SDCARD_DETECT_PULL, 0);
#endif
}
void sdcard_select_sd(void) {
pyb_sdmmc_flags |= PYB_SDMMC_FLAG_SD;
}
void sdcard_select_mmc(void) {
pyb_sdmmc_flags |= PYB_SDMMC_FLAG_MMC;
}
static void sdmmc_msp_init(void) {
// enable SDIO clock
SDMMC_CLK_ENABLE();
#if defined(STM32H7)
// Reset SDMMC
SDMMC_FORCE_RESET();
SDMMC_RELEASE_RESET();
#endif
// NVIC configuration for SDIO interrupts
NVIC_SetPriority(SDMMC_IRQn, IRQ_PRI_SDIO);
HAL_NVIC_EnableIRQ(SDMMC_IRQn);
// GPIO have already been initialised by sdcard_init
}
void sdmmc_msp_deinit(void) {
HAL_NVIC_DisableIRQ(SDMMC_IRQn);
SDMMC_CLK_DISABLE();
}
#if MICROPY_HW_ENABLE_SDCARD
void HAL_SD_MspInit(SD_HandleTypeDef *hsd) {
sdmmc_msp_init();
}
void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd) {
sdmmc_msp_deinit();
}
#endif
#if MICROPY_HW_ENABLE_MMCARD
void HAL_MMC_MspInit(MMC_HandleTypeDef *hsd) {
sdmmc_msp_init();
}
void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hsd) {
sdmmc_msp_deinit();
}
#endif
bool sdcard_is_present(void) {
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
return false;
}
#endif
#if defined(MICROPY_HW_SDCARD_DETECT_PIN)
return mp_hal_pin_read(MICROPY_HW_SDCARD_DETECT_PIN) == MICROPY_HW_SDCARD_DETECT_PRESENT;
#else
return true;
#endif
}
#if MICROPY_HW_ENABLE_SDCARD
static HAL_StatusTypeDef sdmmc_init_sd(void) {
// SD device interface configuration
sdmmc_handle.sd.Instance = SDIO;
sdmmc_handle.sd.Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
#if !defined(STM32H5) && !defined(STM32H7)
sdmmc_handle.sd.Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
#endif
sdmmc_handle.sd.Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_ENABLE;
sdmmc_handle.sd.Init.BusWide = SDIO_BUS_WIDE_1B;
sdmmc_handle.sd.Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
sdmmc_handle.sd.Init.ClockDiv = SDIO_TRANSFER_CLK_DIV;
// init the SD interface, with retry if it's not ready yet
HAL_StatusTypeDef status;
for (int retry = 10; (status = HAL_SD_Init(&sdmmc_handle.sd)) != HAL_OK; retry--) {
if (retry == 0) {
return status;
}
mp_hal_delay_ms(50);
}
#if MICROPY_HW_SDCARD_BUS_WIDTH >= 4
// configure the SD bus width for 4/8-bit wide operation
status = HAL_SD_ConfigWideBusOperation(&sdmmc_handle.sd, SDIO_BUS_WIDE_VALUE);
if (status != HAL_OK) {
HAL_SD_DeInit(&sdmmc_handle.sd);
return status;
}
#endif
return HAL_OK;
}
#endif
#if MICROPY_HW_ENABLE_MMCARD
static HAL_StatusTypeDef sdmmc_init_mmc(void) {
// MMC device interface configuration
sdmmc_handle.mmc.Instance = SDIO;
sdmmc_handle.mmc.Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
#ifndef STM32H7
sdmmc_handle.mmc.Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
#endif
sdmmc_handle.mmc.Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_ENABLE;
sdmmc_handle.mmc.Init.BusWide = SDIO_BUS_WIDE_1B;
sdmmc_handle.mmc.Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
sdmmc_handle.mmc.Init.ClockDiv = SDIO_TRANSFER_CLK_DIV;
// Init the SDIO interface
HAL_StatusTypeDef status = HAL_MMC_Init(&sdmmc_handle.mmc);
if (status != HAL_OK) {
return status;
}
#ifdef MICROPY_HW_MMCARD_LOG_BLOCK_NBR
// A board can override the number of logical blocks (card capacity) if needed.
// This is needed when a card is high capacity because the extended CSD command
// is not supported by the current version of the HAL.
sdmmc_handle.mmc.MmcCard.LogBlockNbr = MICROPY_HW_MMCARD_LOG_BLOCK_NBR;
#endif
#if MICROPY_HW_SDCARD_BUS_WIDTH >= 4
// Configure the SDIO bus width for 4/8-bit wide operation
#ifdef STM32F7
sdmmc_handle.mmc.Init.ClockBypass = SDIO_CLOCK_BYPASS_ENABLE;
#endif
status = HAL_MMC_ConfigWideBusOperation(&sdmmc_handle.mmc, SDIO_BUS_WIDE_VALUE);
if (status != HAL_OK) {
HAL_MMC_DeInit(&sdmmc_handle.mmc);
return status;
}
#endif
return HAL_OK;
}
#endif
bool sdcard_power_on(void) {
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_ACTIVE) {
return true;
}
#ifdef MICROPY_BOARD_SDCARD_POWER
MICROPY_BOARD_SDCARD_POWER
#endif
HAL_StatusTypeDef status = HAL_ERROR;
switch (pyb_sdmmc_flags) {
#if MICROPY_HW_ENABLE_SDCARD
case PYB_SDMMC_FLAG_SD:
if (sdcard_is_present()) {
status = sdmmc_init_sd();
}
break;
#endif
#if MICROPY_HW_ENABLE_MMCARD
case PYB_SDMMC_FLAG_MMC:
status = sdmmc_init_mmc();
break;
#endif
}
if (status == HAL_OK) {
pyb_sdmmc_flags |= PYB_SDMMC_FLAG_ACTIVE;
return true;
} else {
return false;
}
}
void sdcard_power_off(void) {
switch (pyb_sdmmc_flags) {
#if MICROPY_HW_ENABLE_SDCARD
case PYB_SDMMC_FLAG_ACTIVE | PYB_SDMMC_FLAG_SD:
HAL_SD_DeInit(&sdmmc_handle.sd);
break;
#endif
#if MICROPY_HW_ENABLE_MMCARD
case PYB_SDMMC_FLAG_ACTIVE | PYB_SDMMC_FLAG_MMC:
HAL_MMC_DeInit(&sdmmc_handle.mmc);
break;
#endif
}
pyb_sdmmc_flags &= ~PYB_SDMMC_FLAG_ACTIVE;
}
uint64_t sdcard_get_capacity_in_bytes(void) {
switch (pyb_sdmmc_flags) {
#if MICROPY_HW_ENABLE_SDCARD
case PYB_SDMMC_FLAG_ACTIVE | PYB_SDMMC_FLAG_SD: {
HAL_SD_CardInfoTypeDef cardinfo;
HAL_SD_GetCardInfo(&sdmmc_handle.sd, &cardinfo);
return (uint64_t)cardinfo.LogBlockNbr * (uint64_t)cardinfo.LogBlockSize;
}
#endif
#if MICROPY_HW_ENABLE_MMCARD
case PYB_SDMMC_FLAG_ACTIVE | PYB_SDMMC_FLAG_MMC: {
HAL_MMC_CardInfoTypeDef cardinfo;
HAL_MMC_GetCardInfo(&sdmmc_handle.mmc, &cardinfo);
return (uint64_t)cardinfo.LogBlockNbr * (uint64_t)cardinfo.LogBlockSize;
}
#endif
default:
return 0;
}
}
static void sdmmc_irq_handler(void) {
switch (pyb_sdmmc_flags) {
#if MICROPY_HW_ENABLE_SDCARD
case PYB_SDMMC_FLAG_ACTIVE | PYB_SDMMC_FLAG_SD:
HAL_SD_IRQHandler(&sdmmc_handle.sd);
break;
#endif
#if MICROPY_HW_ENABLE_MMCARD
case PYB_SDMMC_FLAG_ACTIVE | PYB_SDMMC_FLAG_MMC:
HAL_MMC_IRQHandler(&sdmmc_handle.mmc);
break;
#endif
}
}
void SDMMC_IRQHandler(void) {
IRQ_ENTER(SDMMC_IRQn);
sdmmc_irq_handler();
IRQ_EXIT(SDMMC_IRQn);
}
static void sdcard_reset_periph(void) {
// Fully reset the SDMMC peripheral before calling HAL SD DMA functions.
// (There could be an outstanding DTIMEOUT event from a previous call and the
// HAL function enables IRQs before fully configuring the SDMMC peripheral.)
SDIO->DTIMER = 0;
SDIO->DLEN = 0;
SDIO->DCTRL = 0;
SDIO->ICR = SDMMC_STATIC_FLAGS;
}
static HAL_StatusTypeDef sdcard_wait_finished(uint32_t timeout) {
// Wait for HAL driver to be ready (eg for DMA to finish)
uint32_t start = HAL_GetTick();
for (;;) {
// Do an atomic check of the state; WFI will exit even if IRQs are disabled
uint32_t irq_state = disable_irq();
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
if (sdmmc_handle.mmc.State != HAL_MMC_STATE_BUSY) {
enable_irq(irq_state);
break;
}
} else
#endif
{
if (sdmmc_handle.sd.State != HAL_SD_STATE_BUSY) {
enable_irq(irq_state);
break;
}
}
__WFI();
enable_irq(irq_state);
if (HAL_GetTick() - start >= timeout) {
return HAL_TIMEOUT;
}
}
// Wait for SD card to complete the operation
for (;;) {
uint32_t state;
#if MICROPY_HW_ENABLE_MMCARD
MP_STATIC_ASSERT((uint32_t)HAL_SD_CARD_TRANSFER == (uint32_t)HAL_MMC_CARD_TRANSFER);
MP_STATIC_ASSERT((uint32_t)HAL_SD_CARD_SENDING == (uint32_t)HAL_MMC_CARD_SENDING);
MP_STATIC_ASSERT((uint32_t)HAL_SD_CARD_RECEIVING == (uint32_t)HAL_MMC_CARD_RECEIVING);
MP_STATIC_ASSERT((uint32_t)HAL_SD_CARD_PROGRAMMING == (uint32_t)HAL_MMC_CARD_PROGRAMMING);
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
state = HAL_MMC_GetCardState(&sdmmc_handle.mmc);
} else
#endif
{
state = HAL_SD_GetCardState(&sdmmc_handle.sd);
}
if (state == HAL_SD_CARD_TRANSFER) {
return HAL_OK;
}
if (!(state == HAL_SD_CARD_SENDING || state == HAL_SD_CARD_RECEIVING || state == HAL_SD_CARD_PROGRAMMING)) {
return HAL_ERROR;
}
if (HAL_GetTick() - start >= timeout) {
return HAL_TIMEOUT;
}
__WFI();
}
return HAL_OK;
}
mp_uint_t sdcard_read_blocks(uint8_t *dest, uint32_t block_num, uint32_t num_blocks) {
// check that SD card is initialised
if (!(pyb_sdmmc_flags & PYB_SDMMC_FLAG_ACTIVE)) {
return HAL_ERROR;
}
HAL_StatusTypeDef err = HAL_OK;
// check that dest pointer is aligned on a 4-byte boundary
uint8_t *orig_dest = NULL;
uint32_t saved_word;
if (((uint32_t)dest & 3) != 0) {
// Pointer is not aligned so it needs fixing.
// We could allocate a temporary block of RAM (as sdcard_write_blocks
// does) but instead we are going to use the dest buffer inplace. We
// are going to align the pointer, save the initial word at the aligned
// location, read into the aligned memory, move the memory back to the
// unaligned location, then restore the initial bytes at the aligned
// location. We should have no trouble doing this as those initial
// bytes at the aligned location should be able to be changed for the
// duration of this function call.
orig_dest = dest;
dest = (uint8_t *)((uint32_t)dest & ~3);
saved_word = *(uint32_t *)dest;
}
if (query_irq() == IRQ_STATE_ENABLED) {
// we must disable USB irqs to prevent MSC contention with SD card
uint32_t basepri = raise_irq_pri(IRQ_PRI_OTG_FS);
#if SDIO_USE_GPDMA
DMA_HandleTypeDef sd_dma;
dma_init(&sd_dma, &SDMMC_DMA, DMA_PERIPH_TO_MEMORY, &sdmmc_handle);
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
sdmmc_handle.mmc.hdmarx = &sd_dma;
} else
#endif
{
sdmmc_handle.sd.hdmarx = &sd_dma;
}
#endif
// make sure cache is flushed and invalidated so when DMA updates the RAM
// from reading the peripheral the CPU then reads the new data
MP_HAL_CLEANINVALIDATE_DCACHE(dest, num_blocks * SDCARD_BLOCK_SIZE);
sdcard_reset_periph();
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
err = HAL_MMC_ReadBlocks_DMA(&sdmmc_handle.mmc, dest, block_num, num_blocks);
} else
#endif
{
err = HAL_SD_ReadBlocks_DMA(&sdmmc_handle.sd, dest, block_num, num_blocks);
}
if (err == HAL_OK) {
err = sdcard_wait_finished(60000);
}
#if SDIO_USE_GPDMA
dma_deinit(&SDMMC_DMA);
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
sdmmc_handle.mmc.hdmarx = NULL;
} else
#endif
{
sdmmc_handle.sd.hdmarx = NULL;
}
#endif
restore_irq_pri(basepri);
} else {
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
err = HAL_MMC_ReadBlocks(&sdmmc_handle.mmc, dest, block_num, num_blocks, 60000);
} else
#endif
{
err = HAL_SD_ReadBlocks(&sdmmc_handle.sd, dest, block_num, num_blocks, 60000);
}
if (err == HAL_OK) {
err = sdcard_wait_finished(60000);
}
}
if (orig_dest != NULL) {
// move the read data to the non-aligned position, and restore the initial bytes
memmove(orig_dest, dest, num_blocks * SDCARD_BLOCK_SIZE);
memcpy(dest, &saved_word, orig_dest - dest);
}
return err;
}
mp_uint_t sdcard_write_blocks(const uint8_t *src, uint32_t block_num, uint32_t num_blocks) {
// check that SD card is initialised
if (!(pyb_sdmmc_flags & PYB_SDMMC_FLAG_ACTIVE)) {
return HAL_ERROR;
}
HAL_StatusTypeDef err = HAL_OK;
// check that src pointer is aligned on a 4-byte boundary
if (((uint32_t)src & 3) != 0) {
// pointer is not aligned, so allocate a temporary block to do the write
uint8_t *src_aligned = m_new_maybe(uint8_t, SDCARD_BLOCK_SIZE);
if (src_aligned == NULL) {
return HAL_ERROR;
}
for (size_t i = 0; i < num_blocks; ++i) {
memcpy(src_aligned, src + i * SDCARD_BLOCK_SIZE, SDCARD_BLOCK_SIZE);
err = sdcard_write_blocks(src_aligned, block_num + i, 1);
if (err != HAL_OK) {
break;
}
}
m_del(uint8_t, src_aligned, SDCARD_BLOCK_SIZE);
return err;
}
if (query_irq() == IRQ_STATE_ENABLED) {
// we must disable USB irqs to prevent MSC contention with SD card
uint32_t basepri = raise_irq_pri(IRQ_PRI_OTG_FS);
#if SDIO_USE_GPDMA
DMA_HandleTypeDef sd_dma;
dma_init(&sd_dma, &SDMMC_DMA, DMA_MEMORY_TO_PERIPH, &sdmmc_handle);
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
sdmmc_handle.mmc.hdmatx = &sd_dma;
} else
#endif
{
sdmmc_handle.sd.hdmatx = &sd_dma;
}
#endif
// make sure cache is flushed to RAM so the DMA can read the correct data
MP_HAL_CLEAN_DCACHE(src, num_blocks * SDCARD_BLOCK_SIZE);
sdcard_reset_periph();
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
err = HAL_MMC_WriteBlocks_DMA(&sdmmc_handle.mmc, (uint8_t *)src, block_num, num_blocks);
} else
#endif
{
err = HAL_SD_WriteBlocks_DMA(&sdmmc_handle.sd, (uint8_t *)src, block_num, num_blocks);
}
if (err == HAL_OK) {
err = sdcard_wait_finished(60000);
}
#if SDIO_USE_GPDMA
dma_deinit(&SDMMC_DMA);
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
sdmmc_handle.mmc.hdmatx = NULL;
} else
#endif
{
sdmmc_handle.sd.hdmatx = NULL;
}
#endif
restore_irq_pri(basepri);
} else {
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
err = HAL_MMC_WriteBlocks(&sdmmc_handle.mmc, (uint8_t *)src, block_num, num_blocks, 60000);
} else
#endif
{
err = HAL_SD_WriteBlocks(&sdmmc_handle.sd, (uint8_t *)src, block_num, num_blocks, 60000);
}
if (err == HAL_OK) {
err = sdcard_wait_finished(60000);
}
}
return err;
}
/******************************************************************************/
// MicroPython bindings
//
// Expose the SD card or MMC as an object with the block protocol.
#if !BUILDING_MBOOT
// There are singleton SDCard/MMCard objects
#if MICROPY_HW_ENABLE_SDCARD
const mp_obj_base_t pyb_sdcard_obj = {&pyb_sdcard_type};
#endif
#if MICROPY_HW_ENABLE_MMCARD
const mp_obj_base_t pyb_mmcard_obj = {&pyb_mmcard_type};
#endif
#if MICROPY_HW_ENABLE_SDCARD
static mp_obj_t pyb_sdcard_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *args) {
// check arguments
mp_arg_check_num(n_args, n_kw, 0, 0, false);
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
mp_raise_ValueError(MP_ERROR_TEXT("peripheral used by MMCard"));
}
#endif
pyb_sdmmc_flags |= PYB_SDMMC_FLAG_SD;
// return singleton object
return MP_OBJ_FROM_PTR(&pyb_sdcard_obj);
}
#endif
#if MICROPY_HW_ENABLE_MMCARD
static mp_obj_t pyb_mmcard_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *args) {
// check arguments
mp_arg_check_num(n_args, n_kw, 0, 0, false);
#if MICROPY_HW_ENABLE_SDCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_SD) {
mp_raise_ValueError(MP_ERROR_TEXT("peripheral used by SDCard"));
}
#endif
pyb_sdmmc_flags |= PYB_SDMMC_FLAG_MMC;
// return singleton object
return MP_OBJ_FROM_PTR(&pyb_mmcard_obj);
}
#endif
static mp_obj_t sd_present(mp_obj_t self) {
return mp_obj_new_bool(sdcard_is_present());
}
static MP_DEFINE_CONST_FUN_OBJ_1(sd_present_obj, sd_present);
static mp_obj_t sd_power(mp_obj_t self, mp_obj_t state) {
bool result;
if (mp_obj_is_true(state)) {
result = sdcard_power_on();
} else {
sdcard_power_off();
result = true;
}
return mp_obj_new_bool(result);
}
static MP_DEFINE_CONST_FUN_OBJ_2(sd_power_obj, sd_power);
static mp_obj_t sd_info(mp_obj_t self) {
if (!(pyb_sdmmc_flags & PYB_SDMMC_FLAG_ACTIVE)) {
return mp_const_none;
}
uint32_t card_type;
uint32_t log_block_nbr;
uint32_t log_block_size;
#if MICROPY_HW_ENABLE_MMCARD
if (pyb_sdmmc_flags & PYB_SDMMC_FLAG_MMC) {
card_type = sdmmc_handle.mmc.MmcCard.CardType;
log_block_nbr = sdmmc_handle.mmc.MmcCard.LogBlockNbr;
log_block_size = sdmmc_handle.mmc.MmcCard.LogBlockSize;
} else
#endif
{
card_type = sdmmc_handle.sd.SdCard.CardType;
log_block_nbr = sdmmc_handle.sd.SdCard.LogBlockNbr;
log_block_size = sdmmc_handle.sd.SdCard.LogBlockSize;
}
// cardinfo.SD_csd and cardinfo.SD_cid have lots of info but we don't use them
mp_obj_t tuple[3] = {
mp_obj_new_int_from_ull((uint64_t)log_block_nbr * (uint64_t)log_block_size),
mp_obj_new_int_from_uint(log_block_size),
mp_obj_new_int(card_type),
};
return mp_obj_new_tuple(3, tuple);
}
static MP_DEFINE_CONST_FUN_OBJ_1(sd_info_obj, sd_info);
// now obsolete, kept for backwards compatibility
static mp_obj_t sd_read(mp_obj_t self, mp_obj_t block_num) {
uint8_t *dest = m_new(uint8_t, SDCARD_BLOCK_SIZE);
mp_uint_t ret = sdcard_read_blocks(dest, mp_obj_get_int(block_num), 1);
if (ret != 0) {
m_del(uint8_t, dest, SDCARD_BLOCK_SIZE);
mp_raise_msg_varg(&mp_type_Exception, MP_ERROR_TEXT("sdcard_read_blocks failed [%u]"), ret);
}
return mp_obj_new_bytearray_by_ref(SDCARD_BLOCK_SIZE, dest);
}
static MP_DEFINE_CONST_FUN_OBJ_2(sd_read_obj, sd_read);
// now obsolete, kept for backwards compatibility
static mp_obj_t sd_write(mp_obj_t self, mp_obj_t block_num, mp_obj_t data) {
mp_buffer_info_t bufinfo;
mp_get_buffer_raise(data, &bufinfo, MP_BUFFER_READ);
if (bufinfo.len % SDCARD_BLOCK_SIZE != 0) {
mp_raise_msg_varg(&mp_type_ValueError, MP_ERROR_TEXT("writes must be a multiple of %d bytes"), SDCARD_BLOCK_SIZE);
}
mp_uint_t ret = sdcard_write_blocks(bufinfo.buf, mp_obj_get_int(block_num), bufinfo.len / SDCARD_BLOCK_SIZE);
if (ret != 0) {
mp_raise_msg_varg(&mp_type_Exception, MP_ERROR_TEXT("sdcard_write_blocks failed [%u]"), ret);
}
return mp_const_none;
}
static MP_DEFINE_CONST_FUN_OBJ_3(sd_write_obj, sd_write);
static mp_obj_t pyb_sdcard_readblocks(mp_obj_t self, mp_obj_t block_num, mp_obj_t buf) {
mp_buffer_info_t bufinfo;
mp_get_buffer_raise(buf, &bufinfo, MP_BUFFER_WRITE);
mp_uint_t ret = sdcard_read_blocks(bufinfo.buf, mp_obj_get_int(block_num), bufinfo.len / SDCARD_BLOCK_SIZE);
return mp_obj_new_bool(ret == 0);
}
static MP_DEFINE_CONST_FUN_OBJ_3(pyb_sdcard_readblocks_obj, pyb_sdcard_readblocks);
static mp_obj_t pyb_sdcard_writeblocks(mp_obj_t self, mp_obj_t block_num, mp_obj_t buf) {
mp_buffer_info_t bufinfo;
mp_get_buffer_raise(buf, &bufinfo, MP_BUFFER_READ);
mp_uint_t ret = sdcard_write_blocks(bufinfo.buf, mp_obj_get_int(block_num), bufinfo.len / SDCARD_BLOCK_SIZE);
return mp_obj_new_bool(ret == 0);
}
static MP_DEFINE_CONST_FUN_OBJ_3(pyb_sdcard_writeblocks_obj, pyb_sdcard_writeblocks);
static mp_obj_t pyb_sdcard_ioctl(mp_obj_t self, mp_obj_t cmd_in, mp_obj_t arg_in) {
mp_int_t cmd = mp_obj_get_int(cmd_in);
switch (cmd) {
case MP_BLOCKDEV_IOCTL_INIT:
if (!sdcard_power_on()) {
return MP_OBJ_NEW_SMALL_INT(-1); // error
}
return MP_OBJ_NEW_SMALL_INT(0); // success
case MP_BLOCKDEV_IOCTL_DEINIT:
sdcard_power_off();
return MP_OBJ_NEW_SMALL_INT(0); // success
case MP_BLOCKDEV_IOCTL_SYNC:
// nothing to do
return MP_OBJ_NEW_SMALL_INT(0); // success
case MP_BLOCKDEV_IOCTL_BLOCK_COUNT:
return MP_OBJ_NEW_SMALL_INT(sdcard_get_capacity_in_bytes() / SDCARD_BLOCK_SIZE);
case MP_BLOCKDEV_IOCTL_BLOCK_SIZE:
return MP_OBJ_NEW_SMALL_INT(SDCARD_BLOCK_SIZE);
default: // unknown command
return MP_OBJ_NEW_SMALL_INT(-1); // error
}
}
static MP_DEFINE_CONST_FUN_OBJ_3(pyb_sdcard_ioctl_obj, pyb_sdcard_ioctl);
static const mp_rom_map_elem_t pyb_sdcard_locals_dict_table[] = {
{ MP_ROM_QSTR(MP_QSTR_present), MP_ROM_PTR(&sd_present_obj) },
{ MP_ROM_QSTR(MP_QSTR_power), MP_ROM_PTR(&sd_power_obj) },
{ MP_ROM_QSTR(MP_QSTR_info), MP_ROM_PTR(&sd_info_obj) },
{ MP_ROM_QSTR(MP_QSTR_read), MP_ROM_PTR(&sd_read_obj) },
{ MP_ROM_QSTR(MP_QSTR_write), MP_ROM_PTR(&sd_write_obj) },
// block device protocol
{ MP_ROM_QSTR(MP_QSTR_readblocks), MP_ROM_PTR(&pyb_sdcard_readblocks_obj) },
{ MP_ROM_QSTR(MP_QSTR_writeblocks), MP_ROM_PTR(&pyb_sdcard_writeblocks_obj) },
{ MP_ROM_QSTR(MP_QSTR_ioctl), MP_ROM_PTR(&pyb_sdcard_ioctl_obj) },
};
static MP_DEFINE_CONST_DICT(pyb_sdcard_locals_dict, pyb_sdcard_locals_dict_table);
#if MICROPY_HW_ENABLE_SDCARD
MP_DEFINE_CONST_OBJ_TYPE(
pyb_sdcard_type,
MP_QSTR_SDCard,
MP_TYPE_FLAG_NONE,
make_new, pyb_sdcard_make_new,
locals_dict, &pyb_sdcard_locals_dict
);
#endif
#if MICROPY_HW_ENABLE_MMCARD
MP_DEFINE_CONST_OBJ_TYPE(
pyb_mmcard_type,
MP_QSTR_MMCard,
MP_TYPE_FLAG_NONE,
make_new, pyb_mmcard_make_new,
locals_dict, &pyb_sdcard_locals_dict
);
#endif
void sdcard_init_vfs(fs_user_mount_t *vfs, int part) {
pyb_sdmmc_flags = (pyb_sdmmc_flags & PYB_SDMMC_FLAG_ACTIVE) | PYB_SDMMC_FLAG_SD; // force SD mode
vfs->base.type = &mp_fat_vfs_type;
vfs->blockdev.flags |= MP_BLOCKDEV_FLAG_NATIVE | MP_BLOCKDEV_FLAG_HAVE_IOCTL;
vfs->fatfs.drv = vfs;
#if MICROPY_FATFS_MULTI_PARTITION
vfs->fatfs.part = part;
#endif
vfs->blockdev.readblocks[0] = MP_OBJ_FROM_PTR(&pyb_sdcard_readblocks_obj);
vfs->blockdev.readblocks[1] = MP_OBJ_FROM_PTR(&pyb_sdcard_obj);
vfs->blockdev.readblocks[2] = MP_OBJ_FROM_PTR(sdcard_read_blocks); // native version
vfs->blockdev.writeblocks[0] = MP_OBJ_FROM_PTR(&pyb_sdcard_writeblocks_obj);
vfs->blockdev.writeblocks[1] = MP_OBJ_FROM_PTR(&pyb_sdcard_obj);
vfs->blockdev.writeblocks[2] = MP_OBJ_FROM_PTR(sdcard_write_blocks); // native version
vfs->blockdev.u.ioctl[0] = MP_OBJ_FROM_PTR(&pyb_sdcard_ioctl_obj);
vfs->blockdev.u.ioctl[1] = MP_OBJ_FROM_PTR(&pyb_sdcard_obj);
}
#endif // !BUILDING_MBOOT
#endif // MICROPY_HW_ENABLE_SDCARD || MICROPY_HW_ENABLE_MMCARD
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik