This commit adds support for the dual-analog-pads on STM32H7 parts. These
pads/pins are called PA0_C/PA1_C/PC2_C/PC3_C in the datasheet. They each
have an analog switch that can optionally connect them to their normal pin
(eg PA0). When the switch is open, the normal and _C pin are independent
pins/pads.
The approach taken in this commit to make these _C pins available to Python
is:
- put them in their own, independent row in the stm32h7_af.csv definition
file, with only the ADC column defined (they are separate machine.Pin
entities, and doing it this way keeps make-pins.py pretty clean)
- allow a board to reference these pins in the board's pins.csv file by the
name PA0_C etc (so a board can alias them, for example)
- these pins (when enabled in pins.csv) now become available like any other
machine.Pin through both machine.Pin.board and machine.Pin.cpu
- BUT these _C pins have a separate pin type which doesn't have any
methods, because they don't have any functionality
- these _C pins can be used with machine.ADC to construct the appropriate
ADC object, either by passing the string as machine.ADC("PA0_C") or by
passing the object as machine.ADC(machine.Pin.cpu.PA0_C)
- if a board defines both the normal and _C pin (eg both PA0 and PA0_C) in
pins.csv then it must not define the analog switch to be closed (this is
a sanity check for the build, because it doesn't make sense to close the
switch and have two separate pins)
Signed-off-by: Damien George <damien@micropython.org>
This is now consistent with other ports.
Also renamed `pin_{board/cpu}_pins_locals_dict` to
`machine_pin_{board/cpu}_pins_locals_dict`.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
The individual union members (like SPI, I2C) are never used, only the
generic "reg" entry is. And the union names can clash with macro
definitions in the HAL so better to remove them.
genhdr/pins.h is an internal header file that defines all of the pin
objects and it's cleaner to have pin.h include it (where the struct's for
these objects are defined) rather than an explicit include by every user.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
Damien George