This commit adds support for the dual-analog-pads on STM32H7 parts. These
pads/pins are called PA0_C/PA1_C/PC2_C/PC3_C in the datasheet. They each
have an analog switch that can optionally connect them to their normal pin
(eg PA0). When the switch is open, the normal and _C pin are independent
pins/pads.
The approach taken in this commit to make these _C pins available to Python
is:
- put them in their own, independent row in the stm32h7_af.csv definition
file, with only the ADC column defined (they are separate machine.Pin
entities, and doing it this way keeps make-pins.py pretty clean)
- allow a board to reference these pins in the board's pins.csv file by the
name PA0_C etc (so a board can alias them, for example)
- these pins (when enabled in pins.csv) now become available like any other
machine.Pin through both machine.Pin.board and machine.Pin.cpu
- BUT these _C pins have a separate pin type which doesn't have any
methods, because they don't have any functionality
- these _C pins can be used with machine.ADC to construct the appropriate
ADC object, either by passing the string as machine.ADC("PA0_C") or by
passing the object as machine.ADC(machine.Pin.cpu.PA0_C)
- if a board defines both the normal and _C pin (eg both PA0 and PA0_C) in
pins.csv then it must not define the analog switch to be closed (this is
a sanity check for the build, because it doesn't make sense to close the
switch and have two separate pins)
Signed-off-by: Damien George <damien@micropython.org>
This fixes the H7 af.csv files to include the dual-pad information, by
listing the ADCs supported on the _C pad with a C_ADC prefix.
Minimal change to make-pins.py to ignore these entries. This will be
implemented later to emit constants (similar to ADC.CORE_TEMP) to access
these channels.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Changes are:
- Pad all cells to make them easier to read.
- Ensure all files have exactly 19 columns (Port,Pin,AF0-15,ADC)
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Fixes are:
- Comment out lines in pins.csv that do not have valid CPU pins.
It's useful to keep these in the file as "documentation" but in order to
make make-pins.py stricter they need to be commented out.
- Fix some typos (missing P prefix) in pins.csv.
This resulted in some missing board pins.
- Fix some typos in af.csv files.
Some typos of "ADC" and some other that were previously ignored.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This commit is based upon prior work of @dpgeorge and @koendv.
MCU support for the STM32H7A3 and B3 families MCUs:
- STM32H7A3xx
- STM32H7A3xxQ (SMPS)
- STM32H7B3xx
- STM32H7B3xxQ (SMPS)
Support has been added for the STM32H7B3I_DK board.
Signed-off-by: Jan Staal <info@janstaal.com>
Damien George