micropython

Wykres commitów

Autor	SHA1	Wiadomość	Data
Joel Stanley	f03d030080	powerpc/uart: Choose which UART to use at build time, not runtime. Microwatt may have firmware that places data in r3, which was used to detect microwatt vs powernv. This breaks the existing probing of the UART type in this powerpc port. Instead build only the appropriate UART into the firmware, selected by passing the option UART=potato or UART=lpc_serial to the Makefile. A future enhancement would be to parse the device tree and configure MicroPython based on the settings.	2020-05-29 22:54:55 +10:00
Michael Neuling	079cc940a6	powerpc: Add initial port to bare metal PowerPC arch. Runs in microwatt (GHDL and FPGA) and qemu. Port done initially by Michael Neuling, with help from Anton Blanchard and Jordan Niethe.	2019-10-22 22:45:33 +11:00

Autor

SHA1

Wiadomość

Data

Joel Stanley

f03d030080

powerpc/uart: Choose which UART to use at build time, not runtime.

Microwatt may have firmware that places data in r3, which was used to
detect microwatt vs powernv.  This breaks the existing probing of the UART
type in this powerpc port.

Instead build only the appropriate UART into the firmware, selected by
passing the option UART=potato or UART=lpc_serial to the Makefile.

A future enhancement would be to parse the device tree and configure
MicroPython based on the settings.

2020-05-29 22:54:55 +10:00

Michael Neuling

079cc940a6

powerpc: Add initial port to bare metal PowerPC arch.

Runs in microwatt (GHDL and FPGA) and qemu.

Port done initially by Michael Neuling, with help from Anton Blanchard and
Jordan Niethe.

2019-10-22 22:45:33 +11:00

2 Commity (master)