This commit implements a new <AbstractNIC>.ipconfig() function for the NIC
classes that use lwIP, to set and retrieve network configuration for a NIC.
Currently this method supports:
- ipconfig("addr4"): obtain a tuple (addr, netmask) of the currently
configured ipv4 address
- ipconfig("addr6"): obtain a list of tuples (addr, state,
prefered_lifetime, valid_lifetime) of all currently active ipv6
addresses; this includes static, slaac and link-local addresses
- ipconfig("has_dhcp4"): whether ipv4 dhcp has supplied an address
- ipconfig("has_autoconf6"): if there is a valid, non-static ipv6 address
- ipconfig(addr4="1.2.3.4/24"): to set the ipv4 address and netmask
- ipconfig(addr6="2a01::2"): to set a static ipv6 address; note that this
does not configure an interface route, as this does not seem supported by
lwIP
- ipconfig(autoconf6=True): to enable ipv6 network configuration with slaac
- ipconfig(gw4="1.2.3.1"): to set the ipv4 gateway
- ipconfig(dhcp4=True): enable ipv4 dhcp; this sets ipv4 address, netmask,
gateway and a dns server
- ipconfig(dhcp4=False): stops dhcp, releases the ip, and clears the
configured ipv4 address.
- ipconfig(dhcp6=True): enable stateless dhcpv6 to obtain a dns server
There is also a new global configuration function network.ipconfig() that
supports the following:
- network.ipconfig(dns="2a01::2"): set the primary dns server (can be a
ipv4 or ipv6 address)
- network.ipconfig(prefer=6): to prefer ipv6 addresses to be returned as
dns responses (falling back to ipv4 if the host does not have an ipv6
address); note that this does not flush the dns cache, so if a host is
already in the dns cache with its v4 address, subsequent lookups will
return that address even if prefer=6 is set
This interface replaces NIC.ifconfig() completely, and ifconfig() should be
marked as deprecated and removed in a future version.
Signed-off-by: Felix Dörre <felix@dogcraft.de>
This is usually called on soft-reboot, a NIC can implement this to do any
necessary cleaning up (such as invalidating root pointers).
Signed-off-by: iabdalkader <i.abdalkader@gmail.com>
This removes the duplicate code in cyw43, esp32, esp8266 that implements
the same logic as network.hostname.
Renames the `mod_network_hostname` (where we store the hostname value in
`.data`) to `mod_network_hostname_data` to make way for calling the shared
function `mod_network_hostname`.
And uses memcpy for mod_network_hostname_data, because the length of source
is already known and removes reliance on string data being null-terminated.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This changes from the previous limit of 15 characters. Although DHCP and
mDNS allow for up to 63, ESP32 and ESP8266 only allow 32, so this seems
like a reasonable limit to enforce across all ports (and avoids wasting the
additional memory).
Also clarifies that `MICROPY_PY_NETWORK_HOSTNAME_MAX_LEN` does not include
the null terminator (which was unclear before).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This allows for a port (e.g. esp8266/esp32) to use extmod/modnetwork.c
and provide the globals dict, rather than just a list of interfaces.
When this is used, the default implementation of `network.route` and the
NIC list is not enabled.
Also splits out the LWIP-specific helpers from modnetwork.c into
network_lwip.c.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This provides a standard interface to setting the global networking config
for all interfaces and interface types.
For ports that already use either a static hostname (mimxrt, rp2) they will
now use the configured value. The default is configured by the port
(or optionally the board).
For interfaces that previously supported .config(hostname), this is still
supported but now implemented using the global network.hostname.
Similarly, pyb.country and rp2.country are now deprecated, but the methods
still exist (and forward to network.hostname).
Because ESP32/ESP8266 do not use extmod/modnetwork.c they are not affected
by this commit.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This was previously implemented by adding additional members to the
mp_obj_type_t defined for each NIC, which is difficult to do cleanly with
the new object type slots mechanism. The way this works is also not
supported on GCC 8.x and below.
Instead replace it with the type protocol, which is a much simpler way of
achieving the same thing.
This affects the WizNet (in non-LWIP mode) and Nina NIC drivers.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This will always have the maximum/minimum size of a mp_obj_type_t
representation and can be used as a member in other structs.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
To simplify the socket state.
The CC3K driver (see drivers/cc3000/inc/socket.h and src/socket.c) has
socket() returning an INT16 so there is now enough room to store it
directly in the fileno member.
Felix Dörre