kopia lustrzana https://github.com/micropython/micropython
stm32/boards/ARDUINO_GIGA: Add support for Arduino Giga H7 board.
iabdalkader
Damien George
rodzic
b6904cba76
commit
40a49f5a7a
|
|
@ -0,0 +1,45 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2023 Arduino SA
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "storage.h"
|
||||
#include "qspi.h"
|
||||
|
||||
#if MICROPY_HW_SPIFLASH_ENABLE_CACHE
|
||||
// Shared cache for first and second SPI block devices
|
||||
STATIC mp_spiflash_cache_t spi_bdev_cache;
|
||||
#endif
|
||||
|
||||
// First external SPI flash uses hardware QSPI interface
|
||||
const mp_spiflash_config_t spiflash_config = {
|
||||
.bus_kind = MP_SPIFLASH_BUS_QSPI,
|
||||
.bus.u_qspi.data = NULL,
|
||||
.bus.u_qspi.proto = &qspi_proto,
|
||||
#if MICROPY_HW_SPIFLASH_ENABLE_CACHE
|
||||
.cache = &spi_bdev_cache,
|
||||
#endif
|
||||
};
|
||||
|
||||
spi_bdev_t spi_bdev;
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
{
|
||||
"deploy": [
|
||||
"./deploy.md"
|
||||
],
|
||||
"docs": "",
|
||||
"features": [
|
||||
"8MB SDRAM",
|
||||
"16MB Flash",
|
||||
"Dual-core processor",
|
||||
"USB Full speed",
|
||||
"CYW43 WiFi/BT Module"
|
||||
],
|
||||
"images": [
|
||||
"ABX00063_01.front_1000x750.jpg"
|
||||
],
|
||||
"mcu": "STM32H747",
|
||||
"product": "Arduino Giga",
|
||||
"thumbnail": "",
|
||||
"url": "https://store.arduino.cc/products/giga-r1-wifi",
|
||||
"vendor": "Arduino"
|
||||
}
|
||||
|
|
@ -0,0 +1,95 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
*
|
||||
* The MIT License (MIT)
|
||||
*
|
||||
* Copyright (c) 2023 Arduino SA
|
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <string.h>
|
||||
#include "py/mphal.h"
|
||||
#include "storage.h"
|
||||
#include "sdram.h"
|
||||
|
||||
void GIGA_board_startup(void) {
|
||||
}
|
||||
|
||||
void GIGA_board_early_init(void) {
|
||||
HAL_InitTick(0);
|
||||
|
||||
#if MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE == 1
|
||||
// The Arduino/mbed bootloader uses the MPU to protect sector 1
|
||||
// which is used for the flash filesystem. The following code
|
||||
// resets and disables all MPU regions configured in the bootloader.
|
||||
HAL_MPU_Disable();
|
||||
MPU_Region_InitTypeDef MPU_InitStruct;
|
||||
MPU_InitStruct.AccessPermission = MPU_REGION_FULL_ACCESS;
|
||||
MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
|
||||
MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
|
||||
MPU_InitStruct.IsShareable = MPU_ACCESS_NOT_SHAREABLE;
|
||||
MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL1;
|
||||
MPU_InitStruct.SubRegionDisable = 0x00;
|
||||
MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_ENABLE;
|
||||
|
||||
for (int i = MPU_REGION_NUMBER0; i < MPU_REGION_NUMBER15; i++) {
|
||||
MPU_InitStruct.Number = i;
|
||||
MPU_InitStruct.Enable = MPU_REGION_DISABLE;
|
||||
HAL_MPU_ConfigRegion(&MPU_InitStruct);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void GIGA_board_enter_bootloader(void) {
|
||||
RTC_HandleTypeDef RTCHandle;
|
||||
RTCHandle.Instance = RTC;
|
||||
HAL_RTCEx_BKUPWrite(&RTCHandle, RTC_BKP_DR0, 0xDF59);
|
||||
NVIC_SystemReset();
|
||||
}
|
||||
|
||||
void GIGA_board_low_power(int mode) {
|
||||
switch (mode) {
|
||||
case 0: // Leave stop mode.
|
||||
sdram_leave_low_power();
|
||||
break;
|
||||
case 1: // Enter stop mode.
|
||||
sdram_enter_low_power();
|
||||
break;
|
||||
case 2: // Enter standby mode.
|
||||
sdram_enter_power_down();
|
||||
break;
|
||||
}
|
||||
|
||||
#if MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE == 0
|
||||
// Enable QSPI deepsleep for modes 1 and 2
|
||||
mp_spiflash_deepsleep(&spi_bdev.spiflash, (mode != 0));
|
||||
#endif
|
||||
|
||||
#if defined(M4_APP_ADDR)
|
||||
// Signal Cortex-M4 to go to Standby mode.
|
||||
if (mode == 2) {
|
||||
__HAL_RCC_HSEM_CLK_ENABLE();
|
||||
HAL_HSEM_FastTake(0);
|
||||
HAL_HSEM_Release(0, 0);
|
||||
__HAL_RCC_HSEM_CLK_DISABLE();
|
||||
HAL_Delay(100);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
### Via dfu-util
|
||||
|
||||
This board can programmed via DFU bootloader, using e.g. [dfu-util](http://dfu-util.sourceforge.net/).
|
||||
To enter the DFU bootloader, double tap the reset (blue) button, or you can use `machine.bootloader()` from the MicroPython REPL.
|
||||
|
||||
```bash
|
||||
dfu-util -w -a 0 -d 2341:035b -D build-ARDUINO_GIGA/firmware.dfu
|
||||
```
|
||||
|
||||
Or from MicroPython source repository:
|
||||
|
||||
```bash
|
||||
make BOARD=ARDUINO_GIGA deploy
|
||||
```
|
||||
|
|
@ -0,0 +1,11 @@
|
|||
include("$(PORT_DIR)/boards/manifest.py")
|
||||
|
||||
# Networking
|
||||
require("bundle-networking")
|
||||
|
||||
# Utils
|
||||
require("time")
|
||||
require("logging")
|
||||
|
||||
# Bluetooth
|
||||
require("aioble")
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
#ifndef MICROPY_INCLUDED_MBEDTLS_CONFIG_BOARD_H
|
||||
#define MICROPY_INCLUDED_MBEDTLS_CONFIG_BOARD_H
|
||||
|
||||
#define MBEDTLS_ECP_NIST_OPTIM
|
||||
|
||||
#include "ports/stm32/mbedtls/mbedtls_config.h"
|
||||
|
||||
#endif /* MICROPY_INCLUDED_MBEDTLS_CONFIG_BOARD_H */
|
||||
|
|
@ -0,0 +1,318 @@
|
|||
/*
|
||||
* This file is part of the MicroPython project, http://micropython.org/
|
||||
* The MIT License (MIT)
|
||||
* Copyright (c) 2023 Arduino SA
|
||||
*/
|
||||
|
||||
#define MICROPY_HW_BOARD_NAME "GIGA"
|
||||
#define MICROPY_HW_MCU_NAME "STM32H747"
|
||||
#define MICROPY_PY_SYS_PLATFORM "Giga"
|
||||
#define MICROPY_HW_FLASH_FS_LABEL "Giga"
|
||||
|
||||
#define MICROPY_OBJ_REPR (MICROPY_OBJ_REPR_C)
|
||||
#define UINT_FMT "%u"
|
||||
#define INT_FMT "%d"
|
||||
typedef int mp_int_t; // must be pointer size
|
||||
typedef unsigned int mp_uint_t; // must be pointer size
|
||||
|
||||
#define MICROPY_FATFS_EXFAT (1)
|
||||
#define MICROPY_HW_ENABLE_RTC (1)
|
||||
#define MICROPY_HW_ENABLE_RNG (1)
|
||||
#define MICROPY_HW_ENABLE_ADC (1)
|
||||
#define MICROPY_HW_ENABLE_DAC (1)
|
||||
#define MICROPY_HW_ENABLE_USB (1)
|
||||
#define MICROPY_HW_HAS_SWITCH (1)
|
||||
#define MICROPY_HW_HAS_FLASH (1)
|
||||
#define MICROPY_HW_ENABLE_SERVO (1)
|
||||
#define MICROPY_HW_ENABLE_TIMER (1)
|
||||
#define MICROPY_HW_ENABLE_SDCARD (0)
|
||||
#define MICROPY_HW_ENABLE_MMCARD (0)
|
||||
|
||||
// Flash storage config
|
||||
#define MICROPY_HW_SPIFLASH_ENABLE_CACHE (1)
|
||||
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (1)
|
||||
|
||||
#define MICROPY_BOARD_STARTUP GIGA_board_startup
|
||||
void GIGA_board_startup(void);
|
||||
|
||||
#define MICROPY_BOARD_EARLY_INIT GIGA_board_early_init
|
||||
void GIGA_board_early_init(void);
|
||||
|
||||
#define MICROPY_BOARD_ENTER_BOOTLOADER(nargs, args) GIGA_board_enter_bootloader()
|
||||
void GIGA_board_enter_bootloader(void);
|
||||
|
||||
void GIGA_board_low_power(int mode);
|
||||
#define MICROPY_BOARD_LEAVE_STOP GIGA_board_low_power(0);
|
||||
#define MICROPY_BOARD_ENTER_STOP GIGA_board_low_power(1);
|
||||
#define MICROPY_BOARD_ENTER_STANDBY GIGA_board_low_power(2);
|
||||
|
||||
void GIGA_board_osc_enable(int enable);
|
||||
#define MICROPY_BOARD_OSC_ENABLE GIGA_board_osc_enable(1);
|
||||
#define MICROPY_BOARD_OSC_DISABLE GIGA_board_osc_enable(0);
|
||||
|
||||
// PLL1 480MHz/48MHz SDMMC and FDCAN
|
||||
// USB and RNG are clocked from the HSI48
|
||||
#define MICROPY_HW_CLK_PLLM (4)
|
||||
#define MICROPY_HW_CLK_PLLN (240)
|
||||
#define MICROPY_HW_CLK_PLLP (2)
|
||||
#define MICROPY_HW_CLK_PLLQ (20)
|
||||
#define MICROPY_HW_CLK_PLLR (2)
|
||||
#define MICROPY_HW_CLK_PLLVCI (RCC_PLL1VCIRANGE_2)
|
||||
#define MICROPY_HW_CLK_PLLVCO (RCC_PLL1VCOWIDE)
|
||||
#define MICROPY_HW_CLK_PLLFRAC (0)
|
||||
|
||||
// PLL2 200MHz for FMC and QSPI.
|
||||
#define MICROPY_HW_CLK_PLL2M (4)
|
||||
#define MICROPY_HW_CLK_PLL2N (100)
|
||||
#define MICROPY_HW_CLK_PLL2P (2)
|
||||
#define MICROPY_HW_CLK_PLL2Q (2)
|
||||
#define MICROPY_HW_CLK_PLL2R (2)
|
||||
#define MICROPY_HW_CLK_PLL2VCI (RCC_PLL2VCIRANGE_2)
|
||||
#define MICROPY_HW_CLK_PLL2VCO (RCC_PLL2VCOWIDE)
|
||||
#define MICROPY_HW_CLK_PLL2FRAC (0)
|
||||
|
||||
// PLL3 160MHz for ADC and SPI123
|
||||
#define MICROPY_HW_CLK_PLL3M (4)
|
||||
#define MICROPY_HW_CLK_PLL3N (80)
|
||||
#define MICROPY_HW_CLK_PLL3P (2)
|
||||
#define MICROPY_HW_CLK_PLL3Q (2)
|
||||
#define MICROPY_HW_CLK_PLL3R (2)
|
||||
#define MICROPY_HW_CLK_PLL3VCI (RCC_PLL3VCIRANGE_2)
|
||||
#define MICROPY_HW_CLK_PLL3VCO (RCC_PLL3VCOWIDE)
|
||||
#define MICROPY_HW_CLK_PLL3FRAC (0)
|
||||
|
||||
// HSE in BYPASS mode.
|
||||
#define MICROPY_HW_CLK_USE_BYPASS (0)
|
||||
|
||||
// Bus clock divider values
|
||||
#define MICROPY_HW_CLK_AHB_DIV (RCC_HCLK_DIV2)
|
||||
#define MICROPY_HW_CLK_APB1_DIV (RCC_APB1_DIV2)
|
||||
#define MICROPY_HW_CLK_APB2_DIV (RCC_APB2_DIV2)
|
||||
#define MICROPY_HW_CLK_APB3_DIV (RCC_APB3_DIV2)
|
||||
#define MICROPY_HW_CLK_APB4_DIV (RCC_APB4_DIV2)
|
||||
|
||||
// Peripheral clock sources
|
||||
#define MICROPY_HW_RCC_HSI48_STATE (RCC_HSI48_ON)
|
||||
#define MICROPY_HW_RCC_USB_CLKSOURCE (RCC_USBCLKSOURCE_HSI48)
|
||||
#define MICROPY_HW_RCC_RTC_CLKSOURCE (RCC_RTCCLKSOURCE_LSI)
|
||||
#define MICROPY_HW_RCC_FMC_CLKSOURCE (RCC_FMCCLKSOURCE_PLL2)
|
||||
#define MICROPY_HW_RCC_RNG_CLKSOURCE (RCC_RNGCLKSOURCE_HSI48)
|
||||
#define MICROPY_HW_RCC_ADC_CLKSOURCE (RCC_ADCCLKSOURCE_PLL3)
|
||||
#define MICROPY_HW_RCC_SDMMC_CLKSOURCE (RCC_SDMMCCLKSOURCE_PLL)
|
||||
#define MICROPY_HW_RCC_FDCAN_CLKSOURCE (RCC_FDCANCLKSOURCE_PLL)
|
||||
#define MICROPY_HW_RCC_SPI123_CLKSOURCE (RCC_SPI123CLKSOURCE_PLL3)
|
||||
#define MICROPY_HW_RCC_I2C123_CLKSOURCE (RCC_I2C123CLKSOURCE_D2PCLK1)
|
||||
#define MICROPY_HW_RCC_QSPI_CLKSOURCE (RCC_QSPICLKSOURCE_PLL2)
|
||||
|
||||
// SMPS configuration
|
||||
#define MICROPY_HW_PWR_SMPS_CONFIG (PWR_LDO_SUPPLY)
|
||||
|
||||
// There is an external 32kHz oscillator
|
||||
#define RTC_ASYNCH_PREDIV (0)
|
||||
#define RTC_SYNCH_PREDIV (0x7fff)
|
||||
#define MICROPY_HW_RTC_USE_BYPASS (0)
|
||||
#define MICROPY_HW_RTC_USE_US (1)
|
||||
#define MICROPY_HW_RTC_USE_CALOUT (1)
|
||||
|
||||
#if !MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE
|
||||
// QSPI flash #1 for storage
|
||||
#define MICROPY_HW_QSPI_PRESCALER (2) // 100MHz
|
||||
#define MICROPY_HW_QSPIFLASH_SIZE_BITS_LOG2 (27)
|
||||
// Reserve 1MiB at the end for compatibility with alternate firmware that places WiFi blob here.
|
||||
#define MICROPY_HW_SPIFLASH_SIZE_BITS (120 * 1024 * 1024)
|
||||
#define MICROPY_HW_QSPIFLASH_CS (pyb_pin_QSPI2_CS)
|
||||
#define MICROPY_HW_QSPIFLASH_SCK (pyb_pin_QSPI2_CLK)
|
||||
#define MICROPY_HW_QSPIFLASH_IO0 (pyb_pin_QSPI2_D0)
|
||||
#define MICROPY_HW_QSPIFLASH_IO1 (pyb_pin_QSPI2_D1)
|
||||
#define MICROPY_HW_QSPIFLASH_IO2 (pyb_pin_QSPI2_D2)
|
||||
#define MICROPY_HW_QSPIFLASH_IO3 (pyb_pin_QSPI2_D3)
|
||||
|
||||
// SPI flash #1, block device config
|
||||
extern const struct _mp_spiflash_config_t spiflash_config;
|
||||
extern struct _spi_bdev_t spi_bdev;
|
||||
#define MICROPY_HW_BDEV_IOCTL(op, arg) ( \
|
||||
(op) == BDEV_IOCTL_NUM_BLOCKS ? (MICROPY_HW_SPIFLASH_SIZE_BITS / 8 / FLASH_BLOCK_SIZE) : \
|
||||
(op) == BDEV_IOCTL_INIT ? spi_bdev_ioctl(&spi_bdev, (op), (uint32_t)&spiflash_config) : \
|
||||
spi_bdev_ioctl(&spi_bdev, (op), (arg)) \
|
||||
)
|
||||
#define MICROPY_HW_BDEV_READBLOCKS(dest, bl, n) spi_bdev_readblocks(&spi_bdev, (dest), (bl), (n))
|
||||
#define MICROPY_HW_BDEV_WRITEBLOCKS(src, bl, n) spi_bdev_writeblocks(&spi_bdev, (src), (bl), (n))
|
||||
#define MICROPY_HW_BDEV_SPIFLASH_EXTENDED (&spi_bdev)
|
||||
#endif
|
||||
|
||||
// 4 wait states
|
||||
#define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_2
|
||||
|
||||
// UART config
|
||||
#define MICROPY_HW_UART1_TX (pyb_pin_UART1_TX)
|
||||
#define MICROPY_HW_UART1_RX (pyb_pin_UART1_RX)
|
||||
#define MICROPY_HW_UART_REPL PYB_UART_1
|
||||
#define MICROPY_HW_UART_REPL_BAUD 115200
|
||||
|
||||
#define MICROPY_HW_UART2_TX (pyb_pin_UART2_TX)
|
||||
#define MICROPY_HW_UART2_RX (pyb_pin_UART2_RX)
|
||||
|
||||
#define MICROPY_HW_UART4_TX (pyb_pin_UART4_TX)
|
||||
#define MICROPY_HW_UART4_RX (pyb_pin_UART4_RX)
|
||||
|
||||
#define MICROPY_HW_UART6_TX (pyb_pin_UART6_TX)
|
||||
#define MICROPY_HW_UART6_RX (pyb_pin_UART6_RX)
|
||||
|
||||
#define MICROPY_HW_UART7_TX (pyb_pin_BT_TXD)
|
||||
#define MICROPY_HW_UART7_RX (pyb_pin_BT_RXD)
|
||||
#define MICROPY_HW_UART7_RTS (pyb_pin_BT_RTS)
|
||||
#define MICROPY_HW_UART7_CTS (pyb_pin_BT_CTS)
|
||||
|
||||
// I2C busses
|
||||
#define MICROPY_HW_I2C1_SCL (pyb_pin_I2C1_SCL)
|
||||
#define MICROPY_HW_I2C1_SDA (pyb_pin_I2C1_SDA)
|
||||
|
||||
#define MICROPY_HW_I2C2_SCL (pyb_pin_I2C2_SCL)
|
||||
#define MICROPY_HW_I2C2_SDA (pyb_pin_I2C2_SDA)
|
||||
|
||||
#define MICROPY_HW_I2C4_SCL (pyb_pin_I2C4_SCL)
|
||||
#define MICROPY_HW_I2C4_SDA (pyb_pin_I2C4_SDA)
|
||||
|
||||
// SPI config
|
||||
// #define MICROPY_HW_SPI1_NSS (pyb_pin_SPI1_NSS)
|
||||
#define MICROPY_HW_SPI1_SCK (pyb_pin_SPI1_SCK)
|
||||
#define MICROPY_HW_SPI1_MISO (pyb_pin_SPI1_MISO)
|
||||
#define MICROPY_HW_SPI1_MOSI (pyb_pin_SPI1_MOSI)
|
||||
|
||||
#define MICROPY_HW_SPI5_NSS (pyb_pin_SPI5_NSS)
|
||||
#define MICROPY_HW_SPI5_SCK (pyb_pin_SPI5_SCK)
|
||||
#define MICROPY_HW_SPI5_MISO (pyb_pin_SPI5_MISO)
|
||||
#define MICROPY_HW_SPI5_MOSI (pyb_pin_SPI5_MOSI)
|
||||
|
||||
// USRSW is pulled low. Pressing the button makes the input go high.
|
||||
#define MICROPY_HW_USRSW_PIN (pin_C13)
|
||||
#define MICROPY_HW_USRSW_PULL (GPIO_PULLDOWN)
|
||||
#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_RISING)
|
||||
#define MICROPY_HW_USRSW_PRESSED (1)
|
||||
|
||||
// LEDs
|
||||
#define MICROPY_HW_LED1 (pyb_pin_LEDR) // red
|
||||
#define MICROPY_HW_LED2 (pyb_pin_LEDG) // green
|
||||
#define MICROPY_HW_LED3 (pyb_pin_LEDB) // yellow
|
||||
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
|
||||
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
|
||||
|
||||
// WiFi SDMMC
|
||||
#define MICROPY_HW_SDIO_SDMMC (1)
|
||||
#define MICROPY_HW_SDIO_CK (pyb_pin_WL_SDIO_CLK)
|
||||
#define MICROPY_HW_SDIO_CMD (pyb_pin_WL_SDIO_CMD)
|
||||
#define MICROPY_HW_SDIO_D0 (pyb_pin_WL_SDIO_0)
|
||||
#define MICROPY_HW_SDIO_D1 (pyb_pin_WL_SDIO_1)
|
||||
#define MICROPY_HW_SDIO_D2 (pyb_pin_WL_SDIO_2)
|
||||
#define MICROPY_HW_SDIO_D3 (pyb_pin_WL_SDIO_3)
|
||||
|
||||
// CYW43 config
|
||||
#define CYW43_WIFI_NVRAM_INCLUDE_FILE "wifi_nvram_1dx.h"
|
||||
|
||||
// USB config
|
||||
#define MICROPY_HW_USB_FS (1)
|
||||
|
||||
#define MICROPY_HW_USB_CDC_RX_DATA_SIZE (1024)
|
||||
#define MICROPY_HW_USB_CDC_TX_DATA_SIZE (1024)
|
||||
#define MICROPY_HW_USB_CDC_1200BPS_TOUCH (1)
|
||||
|
||||
// Bluetooth config
|
||||
#define MICROPY_HW_BLE_UART_ID (PYB_UART_7)
|
||||
#define MICROPY_HW_BLE_UART_BAUDRATE (115200)
|
||||
#define MICROPY_HW_BLE_UART_BAUDRATE_SECONDARY (3000000)
|
||||
|
||||
// SDRAM
|
||||
#define MICROPY_HW_SDRAM_SIZE (64 / 8 * 1024 * 1024) // 64 Mbit
|
||||
#define MICROPY_HW_SDRAM_STARTUP_TEST (1)
|
||||
#define MICROPY_HW_SDRAM_TEST_FAIL_ON_ERROR (true)
|
||||
|
||||
// Timing configuration for 200MHz/2=100MHz (10ns)
|
||||
#define MICROPY_HW_SDRAM_CLOCK_PERIOD 2
|
||||
#define MICROPY_HW_SDRAM_CAS_LATENCY 2
|
||||
#define MICROPY_HW_SDRAM_FREQUENCY (100000) // 100 MHz
|
||||
#define MICROPY_HW_SDRAM_TIMING_TMRD (2)
|
||||
#define MICROPY_HW_SDRAM_TIMING_TXSR (7)
|
||||
#define MICROPY_HW_SDRAM_TIMING_TRAS (5)
|
||||
#define MICROPY_HW_SDRAM_TIMING_TRC (7)
|
||||
#define MICROPY_HW_SDRAM_TIMING_TWR (2)
|
||||
#define MICROPY_HW_SDRAM_TIMING_TRP (3)
|
||||
#define MICROPY_HW_SDRAM_TIMING_TRCD (3)
|
||||
|
||||
#define MICROPY_HW_SDRAM_ROW_BITS_NUM 12
|
||||
#define MICROPY_HW_SDRAM_MEM_BUS_WIDTH 16
|
||||
#define MICROPY_HW_SDRAM_REFRESH_CYCLES 4096
|
||||
|
||||
#define MICROPY_HW_SDRAM_COLUMN_BITS_NUM 8
|
||||
#define MICROPY_HW_SDRAM_INTERN_BANKS_NUM 4
|
||||
#define MICROPY_HW_SDRAM_RPIPE_DELAY 0
|
||||
#define MICROPY_HW_SDRAM_RBURST (1)
|
||||
#define MICROPY_HW_SDRAM_WRITE_PROTECTION (0)
|
||||
|
||||
#define MICROPY_HW_SDRAM_AUTOREFRESH_NUM (8)
|
||||
#define MICROPY_HW_SDRAM_BURST_LENGTH 1
|
||||
#define MICROPY_HW_SDRAM_REFRESH_RATE (64) // ms
|
||||
|
||||
// SDRAM configuration
|
||||
#define MICROPY_HW_FMC_SDCKE0 (pin_H2)
|
||||
#define MICROPY_HW_FMC_SDNE0 (pin_H3)
|
||||
#define MICROPY_HW_FMC_SDNBL0 (pin_E0)
|
||||
#define MICROPY_HW_FMC_SDNBL1 (pin_E1)
|
||||
#define MICROPY_HW_FMC_SDCLK (pin_G8)
|
||||
#define MICROPY_HW_FMC_SDNCAS (pin_G15)
|
||||
#define MICROPY_HW_FMC_SDNRAS (pin_F11)
|
||||
#define MICROPY_HW_FMC_SDNWE (pin_H5)
|
||||
#define MICROPY_HW_FMC_BA0 (pin_G4)
|
||||
#define MICROPY_HW_FMC_BA1 (pin_G5)
|
||||
#define MICROPY_HW_FMC_NBL0 (pin_E0)
|
||||
#define MICROPY_HW_FMC_NBL1 (pin_E1)
|
||||
#define MICROPY_HW_FMC_A0 (pin_F0)
|
||||
#define MICROPY_HW_FMC_A1 (pin_F1)
|
||||
#define MICROPY_HW_FMC_A2 (pin_F2)
|
||||
#define MICROPY_HW_FMC_A3 (pin_F3)
|
||||
#define MICROPY_HW_FMC_A4 (pin_F4)
|
||||
#define MICROPY_HW_FMC_A5 (pin_F5)
|
||||
#define MICROPY_HW_FMC_A6 (pin_F12)
|
||||
#define MICROPY_HW_FMC_A7 (pin_F13)
|
||||
#define MICROPY_HW_FMC_A8 (pin_F14)
|
||||
#define MICROPY_HW_FMC_A9 (pin_F15)
|
||||
#define MICROPY_HW_FMC_A10 (pin_G0)
|
||||
#define MICROPY_HW_FMC_A11 (pin_G1)
|
||||
#define MICROPY_HW_FMC_A12 (pin_G2)
|
||||
#define MICROPY_HW_FMC_D0 (pin_D14)
|
||||
#define MICROPY_HW_FMC_D1 (pin_D15)
|
||||
#define MICROPY_HW_FMC_D2 (pin_D0)
|
||||
#define MICROPY_HW_FMC_D3 (pin_D1)
|
||||
#define MICROPY_HW_FMC_D4 (pin_E7)
|
||||
#define MICROPY_HW_FMC_D5 (pin_E8)
|
||||
#define MICROPY_HW_FMC_D6 (pin_E9)
|
||||
#define MICROPY_HW_FMC_D7 (pin_E10)
|
||||
#define MICROPY_HW_FMC_D8 (pin_E11)
|
||||
#define MICROPY_HW_FMC_D9 (pin_E12)
|
||||
#define MICROPY_HW_FMC_D10 (pin_E13)
|
||||
#define MICROPY_HW_FMC_D11 (pin_E14)
|
||||
#define MICROPY_HW_FMC_D12 (pin_E15)
|
||||
#define MICROPY_HW_FMC_D13 (pin_D8)
|
||||
#define MICROPY_HW_FMC_D14 (pin_D9)
|
||||
#define MICROPY_HW_FMC_D15 (pin_D10)
|
||||
|
||||
#define MICROPY_HW_USB_VID 0x2341
|
||||
#define MICROPY_HW_USB_PID 0x0566
|
||||
#define MICROPY_HW_USB_PID_CDC_MSC (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_PID_CDC_HID (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_PID_CDC (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_PID_MSC (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_PID_CDC2_MSC (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_PID_CDC2 (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_PID_CDC3 (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_PID_CDC3_MSC (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_PID_CDC_MSC_HID (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_PID_CDC2_MSC_HID (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_PID_CDC3_MSC_HID (MICROPY_HW_USB_PID)
|
||||
#define MICROPY_HW_USB_LANGID_STRING 0x409
|
||||
#define MICROPY_HW_USB_MANUFACTURER_STRING "Arduino"
|
||||
#define MICROPY_HW_USB_PRODUCT_FS_STRING "Giga Virtual Comm Port in FS Mode"
|
||||
#define MICROPY_HW_USB_PRODUCT_HS_STRING "Giga Virtual Comm Port in HS Mode"
|
||||
#define MICROPY_HW_USB_INTERFACE_FS_STRING "Giga Interface"
|
||||
#define MICROPY_HW_USB_INTERFACE_HS_STRING "Giga Interface"
|
||||
#define MICROPY_HW_USB_CONFIGURATION_FS_STRING "Giga Config"
|
||||
#define MICROPY_HW_USB_CONFIGURATION_HS_STRING "Giga Config"
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
USE_MBOOT = 0
|
||||
USE_PYDFU = 0
|
||||
# For dual core HAL drivers.
|
||||
CFLAGS += -DCORE_CM7
|
||||
|
||||
# Arduino bootloader PID:VID
|
||||
BOOTLOADER_DFU_USB_VID = 0x2341
|
||||
BOOTLOADER_DFU_USB_PID = 0x0366
|
||||
|
||||
# MCU settings
|
||||
MCU_SERIES = h7
|
||||
CMSIS_MCU = STM32H747xx
|
||||
MICROPY_FLOAT_IMPL = single
|
||||
AF_FILE = boards/stm32h743_af.csv
|
||||
LD_FILES = boards/ARDUINO_GIGA/stm32h747.ld
|
||||
TEXT0_ADDR = 0x08040000
|
||||
|
||||
# MicroPython settings
|
||||
MICROPY_PY_BLUETOOTH = 1
|
||||
MICROPY_BLUETOOTH_NIMBLE = 1
|
||||
MICROPY_BLUETOOTH_BTSTACK = 0
|
||||
MICROPY_PY_LWIP = 1
|
||||
MICROPY_PY_NETWORK_CYW43 = 1
|
||||
MICROPY_PY_USSL = 1
|
||||
MICROPY_SSL_MBEDTLS = 1
|
||||
|
||||
FROZEN_MANIFEST = $(BOARD_DIR)/manifest.py
|
||||
MBEDTLS_CONFIG_FILE = '"$(BOARD_DIR)/mbedtls_config_board.h"'
|
||||
|
|
@ -0,0 +1,219 @@
|
|||
PA0,PA0
|
||||
PA1,PA1
|
||||
PA2,-PA2
|
||||
PA3,-PA3
|
||||
PA4,PA4
|
||||
PA5,-PA5
|
||||
PA6,-PA6
|
||||
PA7,-PA7
|
||||
PA8,PA8
|
||||
PA9,PA9
|
||||
PA10,PA10
|
||||
PA11,PA11
|
||||
PA12,PA12
|
||||
PA13,PA13
|
||||
PA14,PA14
|
||||
PA15,PA15
|
||||
PB0,-PB0
|
||||
PB1,-PB1
|
||||
PB2,PB2
|
||||
PB3,PB3
|
||||
PB4,PB4
|
||||
PB5,PB5
|
||||
PB6,PB6
|
||||
PB7,PB7
|
||||
PB8,PB8
|
||||
PB9,PB9
|
||||
PB10,PB10
|
||||
PB11,PB11
|
||||
PB12,PB12
|
||||
PB13,PB13
|
||||
PB14,PB14
|
||||
PB15,PB15
|
||||
PC0,-PC0
|
||||
PC1,-PC1
|
||||
PC2,PC2
|
||||
PC3,PC3
|
||||
PC4,-PC4
|
||||
PC5,-PC5
|
||||
PC6,PC6
|
||||
PC7,PC7
|
||||
PC8,PC8
|
||||
PC9,PC9
|
||||
PC10,PC10
|
||||
PC11,PC11
|
||||
PC12,PC12
|
||||
PC13,PC13
|
||||
PC14,PC14
|
||||
PC15,PC15
|
||||
PD0,PD0
|
||||
PD1,PD1
|
||||
PD2,PD2
|
||||
PD3,PD3
|
||||
PD4,PD4
|
||||
PD5,PD5
|
||||
PD6,PD6
|
||||
PD7,PD7
|
||||
PD8,PD8
|
||||
PD9,PD9
|
||||
PD10,PD10
|
||||
PD11,PD11
|
||||
PD12,PD12
|
||||
PD13,PD13
|
||||
PD14,PD14
|
||||
PD15,PD15
|
||||
PE0,PE0
|
||||
PE1,PE1
|
||||
PE2,PE2
|
||||
PE3,PE3
|
||||
PE4,PE4
|
||||
PE5,PE5
|
||||
PE6,PE6
|
||||
PE7,PE7
|
||||
PE8,PE8
|
||||
PE9,PE9
|
||||
PE10,PE10
|
||||
PE11,PE11
|
||||
PE12,PE12
|
||||
PE13,PE13
|
||||
PE14,PE14
|
||||
PE15,PE15
|
||||
PF0,PF0
|
||||
PF1,PF1
|
||||
PF2,PF2
|
||||
PF3,-PF3
|
||||
PF4,-PF4
|
||||
PF5,-PF5
|
||||
PF6,-PF6
|
||||
PF7,-PF7
|
||||
PF8,-PF8
|
||||
PF9,-PF9
|
||||
PF10,-PF10
|
||||
PF11,-PF11
|
||||
PF12,PF12
|
||||
PF13,PF13
|
||||
PF14,-PF14
|
||||
PF15,PF15
|
||||
PG0,PG0
|
||||
PG1,PG1
|
||||
PG2,PG2
|
||||
PG3,PG3
|
||||
PG4,PG4
|
||||
PG5,PG5
|
||||
PG6,PG6
|
||||
PG7,PG7
|
||||
PG8,PG8
|
||||
PG9,PG9
|
||||
PG10,PG10
|
||||
PG11,PG11
|
||||
PG12,PG12
|
||||
PG13,PG13
|
||||
PG14,PG14
|
||||
PG15,PG15
|
||||
PH0,PH0
|
||||
PH1,PH1
|
||||
PH2,-PH2
|
||||
PH3,-PH3
|
||||
PH4,-PH4
|
||||
PH5,-PH5
|
||||
PH6,PH6
|
||||
PH7,PH7
|
||||
PH8,PH8
|
||||
PH9,PH9
|
||||
PH10,PH10
|
||||
PH11,PH11
|
||||
PH12,PH12
|
||||
PH13,PH13
|
||||
PH14,PH14
|
||||
PH15,PH15
|
||||
PI0,PI0
|
||||
PI1,PI1
|
||||
PI2,PI2
|
||||
PI3,PI3
|
||||
PI4,PI4
|
||||
PI5,PI5
|
||||
PI6,PI6
|
||||
PI7,PI7
|
||||
PI8,PI8
|
||||
PI9,PI9
|
||||
PI10,PI10
|
||||
PI11,PI11
|
||||
PI12,PI12
|
||||
PI13,PI13
|
||||
PI14,PI14
|
||||
PI15,PI15
|
||||
PJ0,PJ0
|
||||
PJ1,PJ1
|
||||
PJ2,PJ2
|
||||
PJ3,PJ3
|
||||
PJ4,PJ4
|
||||
PJ5,PJ5
|
||||
PJ6,PJ6
|
||||
PJ7,PJ7
|
||||
PJ8,PJ8
|
||||
PJ9,PJ9
|
||||
PJ10,PJ10
|
||||
PJ11,PJ11
|
||||
PJ12,PJ12
|
||||
PJ13,PJ13
|
||||
PJ14,PJ14
|
||||
PJ15,PJ15
|
||||
PK0,PK0
|
||||
PK1,PK1
|
||||
PK2,PK2
|
||||
PK3,PK3
|
||||
PK4,PK4
|
||||
PK5,PK5
|
||||
PK6,PK6
|
||||
PK7,PK7
|
||||
UART1_TX,PA9
|
||||
UART1_RX,PB7
|
||||
UART2_TX,PD5
|
||||
UART2_RX,PD6
|
||||
UART4_TX,PH13
|
||||
UART4_RX,PI9
|
||||
UART6_TX,PG14
|
||||
UART6_RX,PC7
|
||||
-USB_DM,PA11
|
||||
-USB_DP,PA12
|
||||
BOOT0,BOOT0
|
||||
DAC1,PA4
|
||||
DAC2,PA5
|
||||
LEDR,PI12
|
||||
LEDG,PJ13
|
||||
LEDB,PE3
|
||||
I2C1_SDA,PB9
|
||||
I2C1_SCL,PB8
|
||||
I2C2_SDA,PB11
|
||||
I2C2_SCL,PH4
|
||||
I2C4_SDA,PH12
|
||||
I2C4_SCL,PB6
|
||||
-WL_REG_ON,PB10
|
||||
-WL_HOST_WAKE,PI8
|
||||
-WL_SDIO_0,PC8
|
||||
-WL_SDIO_1,PC9
|
||||
-WL_SDIO_2,PC10
|
||||
-WL_SDIO_3,PC11
|
||||
-WL_SDIO_CMD,PD2
|
||||
-WL_SDIO_CLK,PC12
|
||||
-BT_RXD,-PA8
|
||||
-BT_TXD,PF7
|
||||
-BT_CTS,-PF9
|
||||
-BT_RTS,-PF8
|
||||
-BT_REG_ON,PA10
|
||||
-BT_HOST_WAKE,PG3
|
||||
-BT_DEV_WAKE,PH7
|
||||
-QSPI2_CS,PG6
|
||||
-QSPI2_CLK,PF10
|
||||
-QSPI2_D0,PD11
|
||||
-QSPI2_D1,PD12
|
||||
-QSPI2_D2,PE2
|
||||
-QSPI2_D3,PF6
|
||||
-SPI1_NSS,NC
|
||||
-SPI1_SCK,PB3
|
||||
-SPI1_MISO,PG9
|
||||
-SPI1_MOSI,PD7
|
||||
-SPI5_NSS,PK1
|
||||
-SPI5_SCK,PH6
|
||||
-SPI5_MISO,PJ11
|
||||
-SPI5_MOSI,PJ10
|
||||
|
|
|
@ -0,0 +1,47 @@
|
|||
/*
|
||||
GNU linker script for STM32H747
|
||||
*/
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
ITCM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K
|
||||
DTCM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
RAM (xrw) : ORIGIN = 0x24000000, LENGTH = 512K /* AXI SRAM D1 */
|
||||
SRAM1 (xrw) : ORIGIN = 0x30000000, LENGTH = 128K /* SRAM1 D2 */
|
||||
SRAM2 (xrw) : ORIGIN = 0x30020000, LENGTH = 128K /* SRAM2 D2 */
|
||||
SRAM3 (xrw) : ORIGIN = 0x30040000, LENGTH = 32K /* SRAM3 D2 */
|
||||
SRAM4 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K /* SRAM4 D3 */
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 2048K /* Total available flash */
|
||||
FLASH_EXT (rx) : ORIGIN = 0x90000000, LENGTH = 16384K /* 16MBs external QSPI flash */
|
||||
FLASH_FS (r) : ORIGIN = 0x08020000, LENGTH = 128K /* sector 1 -> Flash storage */
|
||||
FLASH_TEXT (rx) : ORIGIN = 0x08040000, LENGTH = 1792K /* Sector 0 -> Arduino Bootloader
|
||||
Sector 1 -> Reserved for CM4/FS
|
||||
Sectors 2 -> 15 firmware */
|
||||
}
|
||||
|
||||
/* produce a link error if there is not this amount of RAM for these sections */
|
||||
_minimum_stack_size = 2K;
|
||||
_minimum_heap_size = 16K;
|
||||
|
||||
/* Define the stack. The stack is full descending so begins just above last byte
|
||||
of RAM. Note that EABI requires the stack to be 8-byte aligned for a call. */
|
||||
_estack = ORIGIN(RAM) + LENGTH(RAM) - _estack_reserve;
|
||||
_sstack = _estack - 16K; /* tunable */
|
||||
|
||||
/* RAM extents for the garbage collector */
|
||||
_ram_start = ORIGIN(RAM);
|
||||
_ram_end = ORIGIN(RAM) + LENGTH(RAM);
|
||||
_heap_start = _ebss; /* heap starts just after statically allocated memory */
|
||||
_heap_end = _sstack;
|
||||
|
||||
/* Note the following varilables are only used if the filesystem flash storage is enabled */
|
||||
/* Location of filesystem RAM cache */
|
||||
_micropy_hw_internal_flash_storage_ram_cache_start = ORIGIN(DTCM);
|
||||
_micropy_hw_internal_flash_storage_ram_cache_end = ORIGIN(DTCM) + LENGTH(DTCM);
|
||||
|
||||
/* Location of filesystem flash storage */
|
||||
_micropy_hw_internal_flash_storage_start = ORIGIN(FLASH_FS);
|
||||
_micropy_hw_internal_flash_storage_end = ORIGIN(FLASH_FS) + LENGTH(FLASH_FS);
|
||||
|
||||
INCLUDE common_blifs.ld
|
||||
|
|
@ -0,0 +1,51 @@
|
|||
/* This file is part of the MicroPython project, http://micropython.org/
|
||||
* The MIT License (MIT)
|
||||
* Copyright (c) 2019 Damien P. George
|
||||
*/
|
||||
#ifndef MICROPY_INCLUDED_STM32H7XX_HAL_CONF_H
|
||||
#define MICROPY_INCLUDED_STM32H7XX_HAL_CONF_H
|
||||
|
||||
#include "boards/stm32h7xx_hal_conf_base.h"
|
||||
|
||||
// Oscillator values in Hz
|
||||
#define HSE_VALUE (16000000)
|
||||
#define LSE_VALUE (32768)
|
||||
#define EXTERNAL_CLOCK_VALUE (12288000)
|
||||
|
||||
// Oscillator timeouts in ms
|
||||
#define HSE_STARTUP_TIMEOUT (5000)
|
||||
#define LSE_STARTUP_TIMEOUT (5000)
|
||||
|
||||
#define DATA_CACHE_ENABLE 1
|
||||
#define INSTRUCTION_CACHE_ENABLE 1
|
||||
#define DATA_CACHE_ENABLE 1
|
||||
#define INSTRUCTION_CACHE_ENABLE 1
|
||||
#define PREFETCH_ENABLE 1
|
||||
#define USE_RTOS 0
|
||||
|
||||
#define HAL_HSEM_MODULE_ENABLED
|
||||
#define HAL_JPEG_MODULE_ENABLED
|
||||
#define HAL_LPTIM_MODULE_ENABLED
|
||||
#define HAL_LTDC_MODULE_ENABLED
|
||||
#define HAL_MDIOS_MODULE_ENABLED
|
||||
#define HAL_MDMA_MODULE_ENABLED
|
||||
#define HAL_MMC_MODULE_ENABLED
|
||||
#define HAL_NAND_MODULE_ENABLED
|
||||
#define HAL_OPAMP_MODULE_ENABLED
|
||||
#define HAL_QSPI_MODULE_ENABLED
|
||||
#define HAL_RNG_MODULE_ENABLED
|
||||
#define HAL_SAI_MODULE_ENABLED
|
||||
#define HAL_SMBUS_MODULE_ENABLED
|
||||
#define HAL_SPDIFRX_MODULE_ENABLED
|
||||
#define HAL_SRAM_MODULE_ENABLED
|
||||
#define HAL_SWPMI_MODULE_ENABLED
|
||||
|
||||
#ifdef HAL_HSEM_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_hsem.h"
|
||||
#endif
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32h7xx_hal_mmc.h"
|
||||
#endif
|
||||
|
||||
#endif // MICROPY_INCLUDED_STM32H7XX_HAL_CONF_H
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
static const uint8_t wifi_nvram_4343[] CYW43_RESOURCE_ATTRIBUTE =
|
||||
// Type1DX_Final_nvram2.txt
|
||||
// 2.4 GHz, 20 MHz BW mode
|
||||
"manfid=0x2d0\x00"
|
||||
"prodid=0x0726\x00"
|
||||
"vendid=0x14e4\x00"
|
||||
"devid=0x43e2\x00"
|
||||
"boardtype=0x0726\x00"
|
||||
"boardrev=0x1202\x00"
|
||||
"boardnum=22\x00"
|
||||
"macaddr=00:90:4c:c5:12:38\x00"
|
||||
"sromrev=11\x00"
|
||||
"boardflags=0x00404201\x00"
|
||||
"boardflags3=0x04000000\x00"
|
||||
"xtalfreq=37400\x00"
|
||||
"nocrc=1\x00"
|
||||
"ag0=0\x00"
|
||||
"aa2g=1\x00"
|
||||
"ccode=ALL\x00"
|
||||
// "pa0itssit=0x20\x00"
|
||||
"extpagain2g=0\x00"
|
||||
"pa2ga0=-145,6667,-751\x00"
|
||||
"AvVmid_c0=0x0,0xc8\x00"
|
||||
"cckpwroffset0=2\x00"
|
||||
"maxp2ga0=74\x00"
|
||||
// "txpwrbckof=6\x00"
|
||||
"cckbw202gpo=0\x00"
|
||||
"legofdmbw202gpo=0x88888888\x00"
|
||||
"mcsbw202gpo=0xaaaaaaaa\x00"
|
||||
"propbw202gpo=0xdd\x00"
|
||||
"ofdmdigfilttype=18\x00"
|
||||
"ofdmdigfilttypebe=18\x00"
|
||||
"papdmode=1\x00"
|
||||
"papdvalidtest=1\x00"
|
||||
"pacalidx2g=48\x00"
|
||||
"papdepsoffset=-22\x00"
|
||||
"papdendidx=58\x00"
|
||||
"il0macaddr=00:90:4c:c5:12:38\x00"
|
||||
"wl0id=0x431b\x00"
|
||||
"muxenab=0x10\x00"
|
||||
// BT COEX deferral limit setting
|
||||
// "btc_params 8 45000\x00"
|
||||
// "btc_params 10 20000\x00"
|
||||
// "spurconfig=0x3\x00"
|
||||
// Antenna diversity
|
||||
"swdiv_en=1\x00"
|
||||
"swdiv_gpio=1\x00"
|
||||
"\x00\x00"
|
||||
;
|
||||
Ładowanie…
Reference in New Issue