3.3 KiB
LongFi Arduino
Installing the MCCI LMIC Library
From the Arduino IDE, open the Library Manager (Sketch->Include Library->Manage Libraries). In the search box, type MCCI and select the MCCI LoRaWAN LMIC library should be the first result.
Adafruit GPS Library [Optional]
From the Arduino IDE, open the Library Manager (Sketch->Include Library->Manage Libraries). In the search box, type Adafruit GPS Library.
Board Support
B-L072Z-LRWAN1 - ST STM32L0 Discovery kit
Install board support package, find instructions here.
Arduino IDE:
- Select Tools -> Board: -> Discovery
- Select Tools -> Board part number: -> Discovery L072Z-LRWAN1
B-L072Z-LRWAN1 Product Page
B-L072Z-LRWAN1 User Manual
Catena 4610 - MCCI
Install board support package, find instructions here.
Arduino IDE:
Select Tools -> Board: -> MCCI Catena 4610.
For the GPS sketch: Select Tools -> Serial Interface -> USB + HW Serial
Catena 4610 Product Page
Catena 4610 Pin Mapping Diagram
Feather M0 RFM95 - Adafruit
- Add Adafruit package index, instructions here.
- Install both Arduino and Adafruit SAMD board support, instructions here.
- (Windows Only) Install drivers, instructions here
Adafruit Feather M0 with RFM95 Product Page
Adafruit Feather M0 with RFM95 Datasheets & Files
Programming (Uploading Method):
B-L072Z-LRWAN1 - ST STM32L0 Discovery kit
STM32CubeProgrammer(SWD)
Will use onboard ST-Link(Flasher/Debugger) to upload sketch.
Download and Install required utility from ST here.
Arduino IDE:
Select Tools -> Upload Method -> STM32CubeProgrammer(SWD)
Catena 4610 - MCCI
DFU
Arduino IDE:
Select Tools -> Upload Method -> DFU
To put the board in DFU mode, hold down the boot button while pressing and releasing the reset button.
ST-Link
Arduino IDE:
Select Tools -> Upload Method -> STLink
Requires an ST-Link debugger connected to SWCLK, SWDIO, Vref, and GND, refer to pin mapping diagram.