mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/examples/bluetooth/bluedroid/ble/ble_compatibility_test/ble_compatibility_test_case.md

6.8 KiB
Czysty Wina Historia

Test Case for BLE Smartphone Compatibility

This document provides a test case for BLE smartphone compatibility and includes detailed procedures for various test items.

Preparation

What You Need

Initialization

Prior to conducting tests, please initialize the smartphone and the ESP device as follows:

  • Set the device name as BLE_COMP_TEST.
  • Set the maximum transmission unit (MTU) of the device to 33 bytes, to test the assembly and division of data packets.
  • If the smartphone has been paired with the ESP device before, please delete the pairing in the Bluetooth setting as follows: Bluetooth -> My Devices -> Find this device with "i" in a circle on the right -> Forget this device. Then restart the Bluetooth service.
  • Before flashing the test program onto the ESP device, make sure to erase the contents of the flash by executing the command make erase_flash flash in the Terminal.
  • When the ESP device restarts, the pairing information will be erased automatically. After that, make sure that the pairing information in the Bluetooth setting of the smartphone is deleted.

Note:

  • For tests marked with (*) further in the document, please bear in mind the following:
    • Your phone performance may affect the results of these tests. If such a test fails, it does not mean the phone fails to meet the test requirements, but that you need to arrange targeted tests.
    • Taking "Test for Connection Success Rate" as an example: if the test cannot be passed for 10 consecutive times, you need to record how many times the test was passed and then arrange targeted tests.
  • For extended testing, please use the [examples] (https://github.com/espressif/esp-idf/tree/master/examples/bluetooth) provided by Espressif.

Test for ADV Performance (*)

Search Device

Refresh the scanning in LightBlue® Explorer to check if the device to be tested can be found quickly. Please repeat this action 10 times.

Test Results

The test is passed, if you get the following results:

  • The device starts advertizing and outputs the log (0) ***** advertising start successfully *****.
  • LightBlue® Explorer scans and successfully discovers BLE_COMP_TEST each time.

Note:

  • The device broadcasts on 3 channels, with an ADV interval of 40 ms.
  • Check if the ADV packet can be received.
  • Check if the Scan Response packet can be received.
  • The device name is included in Scan Response packets only and cannot be found in ADV packets.

Test for Pairing Performance

Connect Device

  • Open the LightBlue® Explorer scan list and tap on the device name BLE_COMP_TEST to establish connection.
  • ESP device prints a passkey: The passkey notify number: 123456.
  • A prompt on the smartphone appears asking if you want to pair. Tap on Pair, and then enter the passkey "123456".

Test Results

The test is passed, if you get the following results:

  • If the connection is successful:
    • Smartphone shows DATA beginning with ADVERTISEMENT DATA
    • ESP device outputs the log: ESP_GATTS_CONNECT_EVT
  • When the pairing is established, the device shows the following log in green: (1) ***** pair status = success *****

Test for Service Discovery Performance

Test Procedures

In LightBlue® Explorer, check the contents of GATT SERVICES & CHARACTERISTICS.

Test Results

The test is passed, if you get the following results:

  • Service that starts with 000000ff appears at the bottom of your smartphone.
  • This service contains 3 characteristics
    • Char_1_Short_WR
    • Char_2_Long_WR
    • Char_3_Short_Notify

Test for Read and Encrypt

Test Procedures

Read the value of Char_1 in LightBlue, and tap on READ AGAIN.

Test Results

  • Encryption is successful, if your smartphone shows the value "11 22 33 44", and the ESP device prints the log: (2) ***** read char_1 *****.
  • Encryption fails, if your smartphone shows a blank screen, and the ESP device outputs the error log in red: GATT_INSUF_AUTHENTICATION: MITM Required.

Test for Short Read and Write

Test Procedures

  • Navigate to the WRITE interface in LightBlue® Explorer, and write the value "88 99" to Char_1.
  • Read Char_1 and check if its value is consistent with the data you have written to it.

Test Results

The test is passed, if you get the following results:

  • ESP device prints the log: (3)***** short write success *****.
  • LightBlue® Explorer shows "88 99" below READ AGAIN.

Test for Long Read and Write

Test Procedures

  • Navigate to the WRITE interface in LightBlue® Explorer, and write the string 0x001122…FF001122…FF of 256 bytes to Char_2. The data takes up 16 lines and looks as follows:

    00112233445566778899AABBCCDDEEFF
00112233445566778899AABBCCDDEEFF
…
00112233445566778899AABBCCDDEEFF
00112233445566778899AABBCCDDEEFF

  • Read Char_2 and check if its value is consistent with the data you have written to it.

Test Results

The test is passed, if you get the following results:

  • The device prints the log: ESP_GATTS_EXEC_WRITE_EVT, Length=256 and (4) ***** long write success *****.
  • LightBlue® Explorer shows (5) ***** read char_2 ***** below READ AGAIN.

Note:

The data to be written can be copied from a text file and pasted into LightBlue® Explorer.

Test for Short Notify

Test Procedures

  • Enter Char_3 and tap on SUBSCRIBE to enable its Notify function.
  • Your phone automatically receives Notify data from the device.

Test Results

The test is passed, if you get the following results:

  • ESP device prints the log: (6) ***** send notify AA BB *****.
  • "AA BB" appears on your smartphone.

Test for Connection Success Rate (*)

Test procedures

  • Break the connection
  • Re-establish the connection
  • Repeat 10 times

Test Results

The test is passed, if you get the following results:

  • Your phone establishes the connection successfully, and the ESP device outputs the log: (1) ***** pair status = success *****.
  • Your phone breaks the connection, and the device outputs the log: ESP_GATTS_DISCONNECT_EVT.
  • Connection can be set up each time with no issues.

Test for Long Connection Stability

The connection must be stable throughout the tests.

Note:

If the existing connection breaks:

  • LightBlue® Explorer prints Disconnected.
  • ESP device outputs the log: ESP_GATTS_DISCONNECT_EVT, reason = (0) ***** advertising start successfully *****.

Further Information

  • If you see any log entry in red, please record it for future reference or feedback it to our engineer.
  • Tests to be added in the future:
    • Multi-connection Test
    • Automatic Re-connection Test