mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/examples/system/esp_event/user_event_loops/README.md

8.7 KiB
Czysty Wina Historia

Supported Targets ESP32 ESP32-C2 ESP32-C3 ESP32-C5 ESP32-C6 ESP32-H2 ESP32-P4 ESP32-S2 ESP32-S3

User Event Loops Example

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example demonstrates the creation and use of user event loops. This example is a supplement to the default event loop example, if the default event loop is not sufficient for the user's use case.

This example demonstrates the following things regarding user event loops:

Creating Event Loops

Creating a loop entails populating the structure esp_event_loop_args_t with the desired parameters and calling esp_event_loop_create(). The call to esp_event_loop_create() produces a handle to the loop, which is used to perform actions on that loop such as handler registration/unregistration and posting events.

Running Event Loops

Depending on the parameters, the user can create either a loop with a dedicated task or one without. The purpose of the dedicated task is to unqueue events from the loop and execute its handlers. For loops without the dedicated task, the user should make a call to esp_event_loop_run() in an application task.

Handler Registration/Unregistration,

Handler registration and unregistration works the same way as the default event loop, just with a different API, esp_event_handler_instance_register_with() and esp_event_handler_instance_unregister_with() respectively. There are two things this example highlights:

  1. The possibility of registering the same handler for different loops
  2. The ability to pass static data to handlers.

Posting Events to the Default Event Loop

Posting events also works the same way as the default event loop, except with a different API, esp_event_post_to().

How to use example

Hardware Required

This example should be able to run on any commonly available ESP32 development board.

Configure the project

idf.py menuconfig

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(Replace PORT with the name of the serial port to use.)

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

The example should have the following log output:

I (296) user_event_loops: setting up
I (296) user_event_loops: starting event source
I (296) user_event_loops: starting application task
I (296) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_without_task, iteration 1 out of 10
I (316) user_event_loops: application_task: running application task
I (326) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_without_task, iteration 1
I (826) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_with_task, iteration 2 out of 10
I (826) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_with_task, iteration 2
I (1326) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_without_task, iteration 3 out of 10
I (1326) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_without_task, iteration 3
I (1426) user_event_loops: application_task: running application task
I (1826) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_with_task, iteration 4 out of 10
I (1826) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_with_task, iteration 4
I (2326) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_without_task, iteration 5 out of 10
I (2326) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_without_task, iteration 5
I (2526) user_event_loops: application_task: running application task
I (2826) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_with_task, iteration 6 out of 10
I (2826) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_with_task, iteration 6
I (3326) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_without_task, iteration 7 out of 10
I (3326) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_without_task, iteration 7
I (3626) user_event_loops: application_task: running application task
I (3826) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_with_task, iteration 8 out of 10
I (3826) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_with_task, iteration 8
I (4326) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_without_task, iteration 9 out of 10
I (4326) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_without_task, iteration 9
I (4726) user_event_loops: application_task: running application task
I (4826) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_with_task, iteration 10 out of 10
I (4826) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_with_task, iteration 10
I (5826) user_event_loops: application_task: running application task
I (5826) user_event_loops: deleting task event source
I (6926) user_event_loops: application_task: running application task
I (8026) user_event_loops: application_task: running application task
I (9126) user_event_loops: application_task: running application task
...

Example Breakdown

Setting of Event Sources

This example has a single event source: a task with a loop inside. Events are raised for the task event source when the loop iterates.

Two user event loops are created, one with a dedicated task and one without. Events are posted to either loops, depending on whether the iteration is odd or even. For the loop with a dedicated task, event handlers are automatically executed. However, for the loop without the dedicated task, a call to run the loop is made in one of the application tasks. As a result, the execution of the event handlers for this loop is interspersed with the execution of application task code.

Step-by-Step Explanation

1.Setting up user event loop and event handlers

I (296) user_event_loops: setting up
I (296) user_event_loops: starting event source
I (296) user_event_loops: starting application task

At this stage the two event loops are created, as well as the handlers for the iteration event registered. The event source is started, which will post the event to the appropriate loop. The application task which makes the call to run the loop without dedicated task, is also created and started.

2. Posting to the event loop

I (296) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_without_task, iteration 1 out of 10
I (316) user_event_loops: application_task: running application task
I (326) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_without_task, iteration 1
I (826) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_with_task, iteration 2 out of 10
I (826) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_with_task, iteration 2
I (1326) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_without_task, iteration 3 out of 10
I (1326) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_without_task, iteration 3
I (1426) user_event_loops: application_task: running application task
I (1826) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_with_task, iteration 4 out of 10
...

In this section of the log we see the odd iterations posted to the loop without dedicated task, and the even iterations to the loop with a dedicated task. For the event with dedicated task, event handlers are executed automatically. The loop without a dedicated task, on the other hand, runs in the context of the application task.

3. Iteration Limit

...
I (4826) user_event_loops: posting TASK_EVENTS:TASK_ITERATION_EVENT to loop_with_task, iteration 10 out of 10
I (4826) user_event_loops: handling TASK_EVENTS:TASK_ITERATION_EVENT from loop_with_task, iteration 10
I (5826) user_event_loops: application_task: running application task
I (5826) user_event_loops: deleting task event source
I (6926) user_event_loops: application_task: running application task
I (8026) user_event_loops: application_task: running application task
I (9126) user_event_loops: application_task: running application task
...

The last of the iteration event is posted, and the event source is deleted. Because the loop without the task no longer receive events to execute, only the application task code executes.