mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

fix(ulp): enable astyle linter and format ULP component

pull/13114/head
Marius Vikhammer 2024-01-22 11:43:38 +08:00
rodzic 01f1434fdd
commit 1bcfde4e7f
51 zmienionych plików z 525 dodań i 589 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
components/ulp/lp_core/include/lp_core_i2c.h
Wyświetl plik

@ -26,7 +26,6 @@ typedef struct {
bool scl_pullup_en; /*!< SCL line enable internal pullup. Can be configured if external pullup is not used. */
} lp_core_i2c_pin_cfg_t;
/**
* @brief LP Core I2C timing config parameters
*/
@ -34,7 +33,6 @@ typedef struct {
uint32_t clk_speed_hz; /*!< LP I2C clock speed for master mode */
} lp_core_i2c_timing_cfg_t;
/**
* @brief LP Core I2C config parameters
*/

1
components/ulp/lp_core/include/ulp_lp_core.h
Wyświetl plik

@ -15,7 +15,6 @@
extern "C" {
#endif
#define ULP_LP_CORE_WAKEUP_SOURCE_HP_CPU BIT(0) // Started by HP core (1 single wakeup)
#define ULP_LP_CORE_WAKEUP_SOURCE_LP_UART BIT(1) // Enable wake-up by a certain number of LP UART RX pulses
#define ULP_LP_CORE_WAKEUP_SOURCE_LP_IO BIT(2) // Enable wake-up by LP IO interrupt

8
components/ulp/lp_core/lp_core.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -40,7 +40,7 @@ static uint32_t wakeup_src_sw_to_hw_flag_lookup[WAKEUP_SOURCE_MAX_NUMBER] = {
static uint32_t lp_core_get_wakeup_source_hw_flags(uint32_t flags)
{
uint32_t hw_flags = 0;
for(int i = 0; i < WAKEUP_SOURCE_MAX_NUMBER; i++) {
for (int i = 0; i < WAKEUP_SOURCE_MAX_NUMBER; i++) {
if (flags & (1 << i)) {
hw_flags |= wakeup_src_sw_to_hw_flag_lookup[i];
}
@ -99,12 +99,11 @@ esp_err_t ulp_lp_core_run(ulp_lp_core_cfg_t* cfg)
ulp_lp_core_lp_timer_set_wakeup_time(cfg->lp_timer_sleep_duration_us);
}
if (cfg->wakeup_source & (ULP_LP_CORE_WAKEUP_SOURCE_LP_UART | ULP_LP_CORE_WAKEUP_SOURCE_LP_IO | ULP_LP_CORE_WAKEUP_SOURCE_ETM )) {
if (cfg->wakeup_source & (ULP_LP_CORE_WAKEUP_SOURCE_LP_UART | ULP_LP_CORE_WAKEUP_SOURCE_LP_IO | ULP_LP_CORE_WAKEUP_SOURCE_ETM)) {
ESP_LOGE(TAG, "Wake-up source not yet supported");
return ESP_ERR_INVALID_ARG;
}
return ESP_OK;
}
@ -129,7 +128,6 @@ esp_err_t ulp_lp_core_load_binary(const uint8_t* program_binary, size_t program_
return ESP_OK;
}
void ulp_lp_core_stop(void)
{
/* Disable wake-up source and put lp core to sleep */

2
components/ulp/lp_core/lp_core/include/ulp_lp_core_gpio.h
Wyświetl plik

@ -117,7 +117,7 @@ static inline void ulp_lp_core_gpio_set_output_mode(lp_io_num_t lp_io_num, rtcio
static inline void ulp_lp_core_gpio_pullup_enable(lp_io_num_t lp_io_num)
{
/* Enable internal weak pull-up */
rtcio_ll_pullup_enable(lp_io_num);
rtcio_ll_pullup_enable(lp_io_num);
}
/**

16
components/ulp/lp_core/lp_core/include/ulp_lp_core_i2c.h
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -33,8 +33,8 @@ extern "C" {
* @note the LP I2C port number is ignored at the moment.
*/
esp_err_t lp_core_i2c_master_read_from_device(i2c_port_t lp_i2c_num, uint16_t device_addr,
uint8_t *data_rd, size_t size,
int32_t ticks_to_wait);
uint8_t *data_rd, size_t size,
int32_t ticks_to_wait);
/**
* @brief Write to I2C device
@ -54,8 +54,8 @@ esp_err_t lp_core_i2c_master_read_from_device(i2c_port_t lp_i2c_num, uint16_t de
* @note the LP I2C port number is ignored at the moment.
*/
esp_err_t lp_core_i2c_master_write_to_device(i2c_port_t lp_i2c_num, uint16_t device_addr,
const uint8_t *data_wr, size_t size,
int32_t ticks_to_wait);
const uint8_t *data_wr, size_t size,
int32_t ticks_to_wait);
/**
* @brief Write to and then read from an I2C device in a single transaction
@ -77,9 +77,9 @@ esp_err_t lp_core_i2c_master_write_to_device(i2c_port_t lp_i2c_num, uint16_t dev
* @note the LP I2C port number is ignored at the moment.
*/
esp_err_t lp_core_i2c_master_write_read_device(i2c_port_t lp_i2c_num, uint16_t device_addr,
const uint8_t *data_wr, size_t write_size,
uint8_t *data_rd, size_t read_size,
int32_t ticks_to_wait);
const uint8_t *data_wr, size_t write_size,
uint8_t *data_rd, size_t read_size,
int32_t ticks_to_wait);
/**
* @brief Enable or disable ACK checking by the LP_I2C controller during write operations

26
components/ulp/lp_core/lp_core/lp_core_i2c.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -37,7 +37,7 @@ static bool s_ack_check_en = true;
* |----------|----------|---------|---------|----------|------------|---------|
*/
static void lp_core_i2c_format_cmd(uint32_t cmd_idx, uint8_t op_code, uint8_t ack_val,
uint8_t ack_expected, uint8_t ack_check_en, uint8_t byte_num)
uint8_t ack_expected, uint8_t ack_check_en, uint8_t byte_num)
{
if (cmd_idx >= sizeof(dev->command)) {
/* We only have limited HW command registers.
@ -51,12 +51,12 @@ static void lp_core_i2c_format_cmd(uint32_t cmd_idx, uint8_t op_code, uint8_t ac
.done = 0, // CMD Done
.op_code = op_code, // Opcode
.ack_val = ack_val, // ACK bit sent by I2C controller during READ.
// Ignored during RSTART, STOP, END and WRITE cmds.
// Ignored during RSTART, STOP, END and WRITE cmds.
.ack_exp = ack_expected, // ACK bit expected by I2C controller during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
// Ignored during RSTART, STOP, END and READ cmds.
.ack_en = ack_check_en, // I2C controller verifies that the ACK bit sent by the
// slave device matches the ACK expected bit during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
// slave device matches the ACK expected bit during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
.byte_num = byte_num, // Byte Num
};
@ -142,8 +142,8 @@ void lp_core_i2c_master_set_ack_check_en(i2c_port_t lp_i2c_num, bool ack_check_e
}
esp_err_t lp_core_i2c_master_read_from_device(i2c_port_t lp_i2c_num, uint16_t device_addr,
uint8_t *data_rd, size_t size,
int32_t ticks_to_wait)
uint8_t *data_rd, size_t size,
int32_t ticks_to_wait)
{
(void)lp_i2c_num;
@ -233,8 +233,8 @@ esp_err_t lp_core_i2c_master_read_from_device(i2c_port_t lp_i2c_num, uint16_t de
}
esp_err_t lp_core_i2c_master_write_to_device(i2c_port_t lp_i2c_num, uint16_t device_addr,
const uint8_t *data_wr, size_t size,
int32_t ticks_to_wait)
const uint8_t *data_wr, size_t size,
int32_t ticks_to_wait)
{
(void)lp_i2c_num;
@ -324,9 +324,9 @@ esp_err_t lp_core_i2c_master_write_to_device(i2c_port_t lp_i2c_num, uint16_t dev
}
esp_err_t lp_core_i2c_master_write_read_device(i2c_port_t lp_i2c_num, uint16_t device_addr,
const uint8_t *data_wr, size_t write_size,
uint8_t *data_rd, size_t read_size,
int32_t ticks_to_wait)
const uint8_t *data_wr, size_t write_size,
uint8_t *data_rd, size_t read_size,
int32_t ticks_to_wait)
{
(void)lp_i2c_num;

188
components/ulp/lp_core/lp_core/lp_core_print.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -103,115 +103,117 @@ static int lp_core_ets_vprintf(void (*putc)(char c), const char *fmt, va_list ap
}
}
switch (c) {
case 'p':
islong = 1;
case 'd':
case 'D':
case 'x':
case 'X':
case 'u':
case 'U':
case 'p':
islong = 1;
case 'd':
case 'D':
case 'x':
case 'X':
case 'u':
case 'U':
#ifdef BINARY_SUPPORT
case 'b':
case 'B':
case 'b':
case 'B':
#endif
if (islonglong) {
val = va_arg(ap, long long);
} else if (islong) {
val = (long long)va_arg(ap, long);
} else {
val = (long long)va_arg(ap, int);
}
if (islonglong) {
val = va_arg(ap, long long);
} else if (islong) {
val = (long long)va_arg(ap, long);
} else {
val = (long long)va_arg(ap, int);
}
if ((c == 'd') || (c == 'D')) {
if (val < 0) {
sign = '-';
val = -val;
}
} else {
if (islonglong) {
;
} else if (islong) {
val &= ((long long)1 << (sizeof(long) * 8)) - 1;
} else {
val &= ((long long)1 << (sizeof(int) * 8)) - 1;
}
if ((c == 'd') || (c == 'D')) {
if (val < 0) {
sign = '-';
val = -val;
}
break;
default:
break;
} else {
if (islonglong) {
;
} else if (islong) {
val &= ((long long)1 << (sizeof(long) * 8)) - 1;
} else {
val &= ((long long)1 << (sizeof(int) * 8)) - 1;
}
}
break;
default:
break;
}
switch (c) {
case 'p':
(*putc)('0');
(*putc)('x');
zero_fill = true;
left_prec = sizeof(unsigned long) * 2;
case 'p':
(*putc)('0');
(*putc)('x');
zero_fill = true;
left_prec = sizeof(unsigned long) * 2;
case 'd':
case 'D':
case 'u':
case 'U':
case 'x':
case 'X':
switch (c) {
case 'd':
case 'D':
case 'u':
case 'U':
length = lp_core_cvt(val, buf, 10, "0123456789");
break;
case 'p':
case 'x':
length = lp_core_cvt(val, buf, 16, "0123456789abcdef");
break;
case 'X':
switch (c) {
case 'd':
case 'D':
case 'u':
case 'U':
length = lp_core_cvt(val, buf, 10, "0123456789");
break;
case 'p':
case 'x':
length = lp_core_cvt(val, buf, 16, "0123456789abcdef");
break;
case 'X':
length = lp_core_cvt(val, buf, 16, "0123456789ABCDEF");
break;
}
cp = buf;
length = lp_core_cvt(val, buf, 16, "0123456789ABCDEF");
break;
case 's':
case 'S':
cp = va_arg(ap, char *);
if (cp == NULL) {
cp = "<null>";
}
length = 0;
while (cp[length] != '\0')
length++;
break;
case 'c':
case 'C':
c = va_arg(ap, int /*char*/);
(*putc)(c);
res++;
continue;
}
cp = buf;
break;
case 's':
case 'S':
cp = va_arg(ap, char *);
if (cp == NULL) {
cp = "<null>";
}
length = 0;
while (cp[length] != '\0') {
length++;
}
break;
case 'c':
case 'C':
c = va_arg(ap, int /*char*/);
(*putc)(c);
res++;
continue;
#ifdef BINARY_SUPPORT
case 'b':
case 'B':
length = left_prec;
if (left_prec == 0) {
if (islonglong)
length = sizeof(long long) * 8;
else if (islong)
length = sizeof(long) * 8;
else
length = sizeof(int) * 8;
case 'b':
case 'B':
length = left_prec;
if (left_prec == 0) {
if (islonglong) {
length = sizeof(long long) * 8;
} else if (islong) {
length = sizeof(long) * 8;
} else {
length = sizeof(int) * 8;
}
for (int i = 0; i < length - 1; i++) {
buf[i] = ((val & ((long long)1 << i)) ? '1' : '.');
}
cp = buf;
break;
}
for (int i = 0; i < length - 1; i++) {
buf[i] = ((val & ((long long)1 << i)) ? '1' : '.');
}
cp = buf;
break;
#endif
case '%':
(*putc)('%');
break;
default:
(*putc)('%');
(*putc)(c);
res += 2;
case '%':
(*putc)('%');
break;
default:
(*putc)('%');
(*putc)(c);
res += 2;
}
pad = left_prec - length;
if (sign != '\0') {

2
components/ulp/lp_core/lp_core/lp_core_startup.c
Wyświetl plik

@ -7,10 +7,8 @@
#include "ulp_lp_core_lp_timer_shared.h"
#include "ulp_lp_core_memory_shared.h"
extern void main();
/* Initialize lp core related system functions before calling user's main*/
void lp_core_startup()
{

2
components/ulp/lp_core/lp_core/lp_core_uart.c
Wyświetl plik

@ -182,7 +182,7 @@ int lp_core_uart_read_bytes(uart_port_t lp_uart_num, void *buf, size_t size, int
/* We have some data to read from the Rx FIFO. Check Rx interrupt status */
intr_status = uart_hal_get_intsts_mask(&hal);
if ((intr_status & UART_INTR_RXFIFO_FULL) ||
(intr_status & UART_INTR_RXFIFO_TOUT)) {
(intr_status & UART_INTR_RXFIFO_TOUT)) {
/* This is expected. Clear interrupt status and break */
uart_hal_clr_intsts_mask(&hal, intr_mask);
break;

16
components/ulp/lp_core/lp_core/lp_core_utils.c
Wyświetl plik

@ -1,10 +1,9 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdint.h>
#include "riscv/csr.h"
#include "soc/soc.h"
@ -29,31 +28,31 @@ static uint32_t lp_wakeup_cause = 0;
void ulp_lp_core_update_wakeup_cause(void)
{
if ((lp_core_ll_get_wakeup_source() & LP_CORE_LL_WAKEUP_SOURCE_HP_CPU) \
&& (pmu_ll_lp_get_interrupt_raw(&PMU) & PMU_HP_SW_TRIGGER_INT_RAW)) {
&& (pmu_ll_lp_get_interrupt_raw(&PMU) & PMU_HP_SW_TRIGGER_INT_RAW)) {
lp_wakeup_cause |= LP_CORE_LL_WAKEUP_SOURCE_HP_CPU;
pmu_ll_lp_clear_intsts_mask(&PMU, PMU_HP_SW_TRIGGER_INT_CLR);
}
if ((lp_core_ll_get_wakeup_source() & LP_CORE_LL_WAKEUP_SOURCE_LP_UART) \
&& (uart_ll_get_intraw_mask(&LP_UART) & LP_UART_WAKEUP_INT_RAW)) {
&& (uart_ll_get_intraw_mask(&LP_UART) & LP_UART_WAKEUP_INT_RAW)) {
lp_wakeup_cause |= LP_CORE_LL_WAKEUP_SOURCE_LP_UART;
uart_ll_clr_intsts_mask(&LP_UART, LP_UART_WAKEUP_INT_CLR);
}
if ((lp_core_ll_get_wakeup_source() & LP_CORE_LL_WAKEUP_SOURCE_LP_IO) \
&& rtcio_ll_get_interrupt_status()) {
&& rtcio_ll_get_interrupt_status()) {
lp_wakeup_cause |= LP_CORE_LL_WAKEUP_SOURCE_LP_IO;
rtcio_ll_clear_interrupt_status();
}
if ((lp_core_ll_get_wakeup_source() & LP_CORE_LL_WAKEUP_SOURCE_ETM) \
&& etm_ll_is_lpcore_wakeup_triggered()) {
&& etm_ll_is_lpcore_wakeup_triggered()) {
lp_wakeup_cause |= LP_CORE_LL_WAKEUP_SOURCE_ETM;
etm_ll_clear_lpcore_wakeup_status();
}
if ((lp_core_ll_get_wakeup_source() & LP_CORE_LL_WAKEUP_SOURCE_LP_TIMER) \
&& (lp_timer_ll_get_lp_intr_raw(&LP_TIMER) & LP_TIMER_MAIN_TIMER_LP_INT_RAW)) {
&& (lp_timer_ll_get_lp_intr_raw(&LP_TIMER) & LP_TIMER_MAIN_TIMER_LP_INT_RAW)) {
lp_wakeup_cause |= LP_CORE_LL_WAKEUP_SOURCE_LP_TIMER;
lp_timer_ll_clear_lp_intsts_mask(&LP_TIMER, LP_TIMER_MAIN_TIMER_LP_INT_CLR);
}
@ -77,7 +76,6 @@ void ulp_lp_core_wakeup_main_processor(void)
REG_SET_FIELD(PMU_HP_LP_CPU_COMM_REG, PMU_LP_TRIGGER_HP, 1);
}
/**
* @brief Makes the co-processor busy wait for a certain number of microseconds
*
@ -112,7 +110,7 @@ void ulp_lp_core_halt(void)
{
REG_SET_FIELD(PMU_LP_CPU_PWR1_REG, PMU_LP_CPU_SLEEP_REQ, 1);
while(1);
while (1);
}
void ulp_lp_core_stop_lp_core(void)

12
components/ulp/lp_core/lp_core_uart.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -29,8 +29,8 @@ static esp_err_t lp_core_uart_param_config(const lp_core_uart_cfg_t *cfg)
/* Argument sanity check */
if ((cfg->uart_proto_cfg.rx_flow_ctrl_thresh > SOC_LP_UART_FIFO_LEN) ||
(cfg->uart_proto_cfg.flow_ctrl > UART_HW_FLOWCTRL_MAX) ||
(cfg->uart_proto_cfg.data_bits > UART_DATA_BITS_MAX)) {
(cfg->uart_proto_cfg.flow_ctrl > UART_HW_FLOWCTRL_MAX) ||
(cfg->uart_proto_cfg.data_bits > UART_DATA_BITS_MAX)) {
// Invalid config
return ESP_ERR_INVALID_ARG;
}
@ -93,9 +93,9 @@ static esp_err_t lp_core_uart_set_pin(const lp_core_uart_cfg_t *cfg)
/* Argument sanity check */
if ((cfg->uart_pin_cfg.tx_io_num != GPIO_NUM_5) ||
(cfg->uart_pin_cfg.rx_io_num != GPIO_NUM_4) ||
(cfg->uart_pin_cfg.rts_io_num != GPIO_NUM_2) ||
(cfg->uart_pin_cfg.cts_io_num != GPIO_NUM_3)) {
(cfg->uart_pin_cfg.rx_io_num != GPIO_NUM_4) ||
(cfg->uart_pin_cfg.rts_io_num != GPIO_NUM_2) ||
(cfg->uart_pin_cfg.cts_io_num != GPIO_NUM_3)) {
// Invalid IO config
return ESP_ERR_INVALID_ARG;
}

1
components/ulp/lp_core/shared/include/ulp_lp_core_lp_timer_shared.h
Wyświetl plik

@ -24,7 +24,6 @@ extern "C" {
*/
void ulp_lp_core_lp_timer_set_wakeup_time(uint64_t sleep_duration_us);
/**
* @brief Disables the lp timer alarm and clears any pending alarm interrupts
*

3
components/ulp/lp_core/shared/ulp_lp_core_lp_timer_shared.c
Wyświetl plik

@ -26,7 +26,6 @@ static uint64_t lp_timer_hal_get_cycle_count(void)
uint32_t lo = lp_timer_ll_get_counter_value_low(lp_timer_context.dev, 0);
uint32_t hi = lp_timer_ll_get_counter_value_high(lp_timer_context.dev, 0);
lp_timer_counter_value_t result = {
.lo = lo,
.hi = hi
@ -35,7 +34,6 @@ static uint64_t lp_timer_hal_get_cycle_count(void)
return result.val;
}
void ulp_lp_core_lp_timer_set_wakeup_time(uint64_t sleep_duration_us)
{
uint64_t cycle_cnt = lp_timer_hal_get_cycle_count();
@ -44,7 +42,6 @@ void ulp_lp_core_lp_timer_set_wakeup_time(uint64_t sleep_duration_us)
lp_timer_hal_set_alarm_target(alarm_target);
}
void ulp_lp_core_lp_timer_disable(void)
{
lp_timer_ll_set_target_enable(lp_timer_context.dev, TIMER_ID, false);

3
components/ulp/lp_core/shared/ulp_lp_core_memory_shared.c
Wyświetl plik

@ -9,7 +9,6 @@
#include "soc/soc.h"
#include "esp_assert.h"
/* The last CONFIG_ULP_SHARED_MEM bytes of the reserved memory are reserved for a shared cfg struct
The main cpu app and the ulp binary can share variables automatically through the linkerscript generated from
esp32ulp_mapgen.py, but this is not available when compiling the ULP library.
@ -24,5 +23,5 @@ ESP_STATIC_ASSERT(CONFIG_ULP_SHARED_MEM == sizeof(ulp_lp_core_memory_shared_cfg_
ulp_lp_core_memory_shared_cfg_t* ulp_lp_core_memory_shared_cfg_get(void)
{
return s_shared_mem;
return s_shared_mem;
}

88
components/ulp/test_apps/lp_core/main/lp_core/test_main.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -10,8 +10,6 @@
#include "test_shared.h"
#include "ulp_lp_core_utils.h"
volatile lp_core_test_commands_t main_cpu_command = LP_CORE_NO_COMMAND;
volatile lp_core_test_command_reply_t main_cpu_reply = LP_CORE_COMMAND_INVALID;
volatile lp_core_test_commands_t command_resp = LP_CORE_NO_COMMAND;
@ -24,69 +22,69 @@ void handle_commands(lp_core_test_commands_t cmd)
{
switch (cmd) {
case LP_CORE_READ_WRITE_TEST:
/* Echo the command ID back to the main CPU */
command_resp = LP_CORE_READ_WRITE_TEST;
case LP_CORE_READ_WRITE_TEST:
/* Echo the command ID back to the main CPU */
command_resp = LP_CORE_READ_WRITE_TEST;
/* Process test data */
test_data_out = test_data_in ^ XOR_MASK;
/* Process test data */
test_data_out = test_data_in ^ XOR_MASK;
/* Set the command reply status */
main_cpu_reply = LP_CORE_COMMAND_OK;
main_cpu_command = LP_CORE_NO_COMMAND;
/* Set the command reply status */
main_cpu_reply = LP_CORE_COMMAND_OK;
main_cpu_command = LP_CORE_NO_COMMAND;
break;
break;
case LP_CORE_DELAY_TEST:
/* Echo the command ID back to the main CPU */
command_resp = LP_CORE_DELAY_TEST;
case LP_CORE_DELAY_TEST:
/* Echo the command ID back to the main CPU */
command_resp = LP_CORE_DELAY_TEST;
ulp_lp_core_delay_us(test_data_in);
main_cpu_reply = LP_CORE_COMMAND_OK;
main_cpu_command = LP_CORE_NO_COMMAND;
break;
ulp_lp_core_delay_us(test_data_in);
main_cpu_reply = LP_CORE_COMMAND_OK;
main_cpu_command = LP_CORE_NO_COMMAND;
break;
case LP_CORE_DEEP_SLEEP_WAKEUP_SHORT_DELAY_TEST:
/* Echo the command ID back to the main CPU */
command_resp = LP_CORE_DEEP_SLEEP_WAKEUP_SHORT_DELAY_TEST;
case LP_CORE_DEEP_SLEEP_WAKEUP_SHORT_DELAY_TEST:
/* Echo the command ID back to the main CPU */
command_resp = LP_CORE_DEEP_SLEEP_WAKEUP_SHORT_DELAY_TEST;
/* Set the command reply status */
main_cpu_reply = LP_CORE_COMMAND_OK;
main_cpu_command = LP_CORE_NO_COMMAND;
/* Set the command reply status */
main_cpu_reply = LP_CORE_COMMAND_OK;
main_cpu_command = LP_CORE_NO_COMMAND;
ulp_lp_core_delay_us(1000*1000);
ulp_lp_core_wakeup_main_processor();
ulp_lp_core_delay_us(1000 * 1000);
ulp_lp_core_wakeup_main_processor();
break;
break;
case LP_CORE_DEEP_SLEEP_WAKEUP_LONG_DELAY_TEST:
/* Echo the command ID back to the main CPU */
command_resp = LP_CORE_DEEP_SLEEP_WAKEUP_LONG_DELAY_TEST;
case LP_CORE_DEEP_SLEEP_WAKEUP_LONG_DELAY_TEST:
/* Echo the command ID back to the main CPU */
command_resp = LP_CORE_DEEP_SLEEP_WAKEUP_LONG_DELAY_TEST;
/* Set the command reply status */
main_cpu_reply = LP_CORE_COMMAND_OK;
main_cpu_command = LP_CORE_NO_COMMAND;
/* Set the command reply status */
main_cpu_reply = LP_CORE_COMMAND_OK;
main_cpu_command = LP_CORE_NO_COMMAND;
ulp_lp_core_delay_us(10000*1000);
ulp_lp_core_wakeup_main_processor();
ulp_lp_core_delay_us(10000 * 1000);
ulp_lp_core_wakeup_main_processor();
break;
break;
case LP_CORE_NO_COMMAND:
main_cpu_reply = LP_CORE_COMMAND_NOK;
break;
case LP_CORE_NO_COMMAND:
main_cpu_reply = LP_CORE_COMMAND_NOK;
break;
default:
main_cpu_reply = LP_CORE_COMMAND_NOK;
break;
default:
main_cpu_reply = LP_CORE_COMMAND_NOK;
break;
}
}
int main (void)
int main(void)
{
while (1) {
handle_commands(main_cpu_command);
}
}
return 0;
}

2
components/ulp/test_apps/lp_core/main/lp_core/test_main_counter.c
Wyświetl plik

@ -10,7 +10,7 @@
volatile uint32_t counter;
volatile uint32_t counter_wakeup_limit;
int main (void)
int main(void)
{
counter++;

3
components/ulp/test_apps/lp_core/main/lp_core/test_main_gpio.c
Wyświetl plik

@ -12,8 +12,7 @@
volatile uint32_t gpio_test_finished;
volatile uint32_t gpio_test_succeeded;
int main (void)
int main(void)
{
ulp_lp_core_gpio_init(LP_IO_NUM_0);

8
components/ulp/test_apps/lp_core/main/lp_core/test_main_i2c.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -17,19 +17,19 @@ volatile lp_core_test_command_reply_t write_test_cmd = LP_CORE_COMMAND_INVALID;
uint8_t data_rd[DATA_LENGTH] = {};
uint8_t data_wr[DATA_LENGTH] = {};
int main (void)
int main(void)
{
lp_core_i2c_master_read_from_device(LP_I2C_NUM_0, I2C_SLAVE_ADDRESS, data_rd, RW_TEST_LENGTH, LP_I2C_TRANS_WAIT_FOREVER);
read_test_reply = LP_CORE_COMMAND_OK;
/* Wait for write command from main CPU */
while(write_test_cmd != LP_CORE_COMMAND_OK) {
while (write_test_cmd != LP_CORE_COMMAND_OK) {
}
lp_core_i2c_master_write_to_device(LP_I2C_NUM_0, I2C_SLAVE_ADDRESS, data_wr, RW_TEST_LENGTH, LP_I2C_TRANS_WAIT_FOREVER);
write_test_cmd = LP_CORE_COMMAND_NOK;
while(1) {
while (1) {
}
}

4
components/ulp/test_apps/lp_core/main/lp_core/test_main_set_timer_wakeup.c
Wyświetl plik

@ -11,13 +11,13 @@
volatile uint32_t set_timer_wakeup_counter;
volatile uint32_t WAKEUP_PERIOD_BASE_US = 100000;
int main (void)
int main(void)
{
set_timer_wakeup_counter++;
/* Alternate between WAKEUP_PERIOD_BASE_US and 2*WAKEUP_PERIOD_BASE_US to let the main CPU see that
the wake-up time can be reconfigured */
ulp_lp_core_lp_timer_set_wakeup_time( ((set_timer_wakeup_counter % 2) + 1)*WAKEUP_PERIOD_BASE_US);
ulp_lp_core_lp_timer_set_wakeup_time(((set_timer_wakeup_counter % 2) + 1)*WAKEUP_PERIOD_BASE_US);
return 0;
}

2
components/ulp/test_apps/lp_core/main/lp_core/test_shared.h
Wyświetl plik

@ -12,7 +12,7 @@
#define DATA_LENGTH 200
#define RW_TEST_LENGTH 129 /*!<Data length for r/w test, any value from 0-DATA_LENGTH*/
typedef enum{
typedef enum {
LP_CORE_READ_WRITE_TEST = 1,
LP_CORE_DELAY_TEST,
LP_CORE_DEEP_SLEEP_WAKEUP_SHORT_DELAY_TEST,

36
components/ulp/test_apps/lp_core/main/test_lp_core.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -35,7 +35,7 @@ extern const uint8_t lp_core_main_gpio_bin_end[] asm("_binary_lp_core_test_app
static void load_and_start_lp_core_firmware(ulp_lp_core_cfg_t* cfg, const uint8_t* firmware_start, const uint8_t* firmware_end)
{
TEST_ASSERT(ulp_lp_core_load_binary(firmware_start,
(firmware_end - firmware_start)) == ESP_OK);
(firmware_end - firmware_start)) == ESP_OK);
TEST_ASSERT(ulp_lp_core_run(cfg) == ESP_OK);
@ -137,7 +137,6 @@ static void do_ulp_wakeup_deepsleep(lp_core_test_commands_t ulp_cmd)
UNITY_TEST_FAIL(__LINE__, "Should not get here!");
}
static void check_reset_reason_ulp_wakeup(void)
{
TEST_ASSERT_EQUAL(ESP_SLEEP_WAKEUP_ULP, esp_sleep_get_wakeup_cause());
@ -154,13 +153,13 @@ static void do_ulp_wakeup_after_long_delay_deepsleep(void)
}
TEST_CASE_MULTIPLE_STAGES("LP-core is able to wakeup main CPU from deep sleep after a short delay", "[ulp]",
do_ulp_wakeup_after_short_delay_deepsleep,
check_reset_reason_ulp_wakeup);
do_ulp_wakeup_after_short_delay_deepsleep,
check_reset_reason_ulp_wakeup);
/* Certain erroneous wake-up triggers happen only after sleeping for a few seconds */
TEST_CASE_MULTIPLE_STAGES("LP-core is able to wakeup main CPU from deep sleep after a long delay", "[ulp]",
do_ulp_wakeup_after_long_delay_deepsleep,
check_reset_reason_ulp_wakeup);
do_ulp_wakeup_after_long_delay_deepsleep,
check_reset_reason_ulp_wakeup);
RTC_FAST_ATTR static struct timeval tv_start;
@ -195,9 +194,8 @@ static void check_reset_reason_and_sleep_duration(void)
TEST_ASSERT_EQUAL(ESP_SLEEP_WAKEUP_ULP, esp_sleep_get_wakeup_cause());
int64_t sleep_duration = (tv_stop.tv_sec - tv_start.tv_sec)*1000 + (tv_stop.tv_usec - tv_start.tv_usec)/1000;
int64_t expected_sleep_duration_ms = ulp_counter_wakeup_limit * LP_TIMER_TEST_SLEEP_DURATION_US/1000;
int64_t sleep_duration = (tv_stop.tv_sec - tv_start.tv_sec) * 1000 + (tv_stop.tv_usec - tv_start.tv_usec) / 1000;
int64_t expected_sleep_duration_ms = ulp_counter_wakeup_limit * LP_TIMER_TEST_SLEEP_DURATION_US / 1000;
printf("CPU slept for %"PRIi64" ms, expected it to sleep approx %"PRIi64" ms\n", sleep_duration, expected_sleep_duration_ms);
/* Rough estimate, as CPU spends quite some time waking up, but will test if lp core is waking up way too often etc */
@ -205,12 +203,11 @@ static void check_reset_reason_and_sleep_duration(void)
}
TEST_CASE_MULTIPLE_STAGES("LP Timer can wakeup lp core periodically during deep sleep", "[ulp]",
do_ulp_wakeup_with_lp_timer_deepsleep,
check_reset_reason_and_sleep_duration);
do_ulp_wakeup_with_lp_timer_deepsleep,
check_reset_reason_and_sleep_duration);
#endif //#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32P4)
TEST_CASE("LP Timer can wakeup lp core periodically", "[lp_core]")
{
int64_t start, test_duration;
@ -223,16 +220,15 @@ TEST_CASE("LP Timer can wakeup lp core periodically", "[lp_core]")
load_and_start_lp_core_firmware(&cfg, lp_core_main_counter_bin_start, lp_core_main_counter_bin_end);
start = esp_timer_get_time();
vTaskDelay(pdMS_TO_TICKS(LP_TIMER_TEST_DURATION_S*1000));
vTaskDelay(pdMS_TO_TICKS(LP_TIMER_TEST_DURATION_S * 1000));
test_duration = esp_timer_get_time() - start;
uint32_t expected_run_count = test_duration / LP_TIMER_TEST_SLEEP_DURATION_US;
printf("LP core ran %"PRIu32" times in %"PRIi64" ms, expected it to run approx %"PRIu32" times\n", ulp_counter, test_duration/1000, expected_run_count);
printf("LP core ran %"PRIu32" times in %"PRIi64" ms, expected it to run approx %"PRIu32" times\n", ulp_counter, test_duration / 1000, expected_run_count);
TEST_ASSERT_INT_WITHIN_MESSAGE(5, expected_run_count, ulp_counter, "LP Core did not wake up the expected number of times");
}
static bool ulp_is_running(uint32_t *counter_variable)
{
uint32_t start_cnt = *counter_variable;
@ -282,13 +278,13 @@ TEST_CASE("LP core can schedule next wake-up time by itself", "[ulp]")
load_and_start_lp_core_firmware(&cfg, lp_core_main_set_timer_wakeup_bin_start, lp_core_main_set_timer_wakeup_bin_end);
start = esp_timer_get_time();
vTaskDelay(pdMS_TO_TICKS(LP_TIMER_TEST_DURATION_S*1000));
vTaskDelay(pdMS_TO_TICKS(LP_TIMER_TEST_DURATION_S * 1000));
test_duration = esp_timer_get_time() - start;
/* ULP will alternative between setting WAKEUP_PERIOD_BASE_US and 2*WAKEUP_PERIOD_BASE_US
as a wakeup period which should give an average wakeup time of 1.5*WAKEUP_PERIOD_BASE_US */
uint32_t expected_run_count = test_duration / (1.5*ulp_WAKEUP_PERIOD_BASE_US);
printf("LP core ran %"PRIu32" times in %"PRIi64" ms, expected it to run approx %"PRIu32" times\n", ulp_set_timer_wakeup_counter, test_duration/1000, expected_run_count);
uint32_t expected_run_count = test_duration / (1.5 * ulp_WAKEUP_PERIOD_BASE_US);
printf("LP core ran %"PRIu32" times in %"PRIi64" ms, expected it to run approx %"PRIu32" times\n", ulp_set_timer_wakeup_counter, test_duration / 1000, expected_run_count);
TEST_ASSERT_INT_WITHIN_MESSAGE(5, expected_run_count, ulp_set_timer_wakeup_counter, "LP Core did not wake up the expected number of times");
}
@ -303,7 +299,7 @@ TEST_CASE("LP core gpio tests", "[ulp]")
load_and_start_lp_core_firmware(&cfg, lp_core_main_gpio_bin_start, lp_core_main_gpio_bin_end);
while(!ulp_gpio_test_finished) {
while (!ulp_gpio_test_finished) {
}
TEST_ASSERT_TRUE(ulp_gpio_test_succeeded);

20
components/ulp/test_apps/lp_core/main/test_lp_core_i2c.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -25,20 +25,18 @@ static const char* TAG = "lp_core_i2c_test";
static void load_and_start_lp_core_firmware(ulp_lp_core_cfg_t* cfg, const uint8_t* firmware_start, const uint8_t* firmware_end)
{
TEST_ASSERT(ulp_lp_core_load_binary(firmware_start,
(firmware_end - firmware_start)) == ESP_OK);
(firmware_end - firmware_start)) == ESP_OK);
TEST_ASSERT(ulp_lp_core_run(cfg) == ESP_OK);
}
#define I2C_SCL_IO 7 /*!<gpio number for i2c clock, for C6 only GPIO7 is valid */
#define I2C_SDA_IO 6 /*!<gpio number for i2c data, for C6 only GPIO6 is valid */
#define I2C_SLAVE_NUM I2C_NUM_0 /*!<I2C port number for slave dev */
#define I2C_SLAVE_TX_BUF_LEN (2*DATA_LENGTH) /*!<I2C slave tx buffer size */
#define I2C_SLAVE_RX_BUF_LEN (2*DATA_LENGTH) /*!<I2C slave rx buffer size */
static uint8_t expected_master_write_data[DATA_LENGTH];
static uint8_t expected_master_read_data[DATA_LENGTH];
@ -50,7 +48,7 @@ static void init_test_data(size_t len)
}
for (int i = 0; i < len; i++) {
expected_master_read_data[i] = i/2;
expected_master_read_data[i] = i / 2;
}
}
@ -73,7 +71,7 @@ static void i2c_master_write_read_test(void)
load_and_start_lp_core_firmware(&cfg, lp_core_main_i2c_bin_start, lp_core_main_i2c_bin_end);
/* Wait for ULP to finish reading */
while(ulp_read_test_reply == LP_CORE_COMMAND_INVALID) {
while (ulp_read_test_reply == LP_CORE_COMMAND_INVALID) {
}
uint8_t *read_data = (uint8_t*)&ulp_data_rd;
@ -82,7 +80,7 @@ static void i2c_master_write_read_test(void)
TEST_ASSERT_EQUAL_HEX8_ARRAY(expected_master_read_data, read_data, RW_TEST_LENGTH);
uint8_t *wr_data = (uint8_t*)&ulp_data_wr;
for(int i = 0; i < RW_TEST_LENGTH; i++) {
for (int i = 0; i < RW_TEST_LENGTH; i++) {
wr_data[i] = expected_master_write_data[i];
}
@ -93,12 +91,10 @@ static void i2c_master_write_read_test(void)
unity_send_signal("slave read");
/* Wait for ULP to finish writing */
while( *write_test_cmd != LP_CORE_COMMAND_NOK) {
while (*write_test_cmd != LP_CORE_COMMAND_NOK) {
}
}
static i2c_config_t i2c_slave_init(void)
{
i2c_config_t conf_slave = {
@ -122,7 +118,7 @@ static void i2c_slave_read_write_test(void)
int size_rd;
i2c_config_t conf_slave = i2c_slave_init();
TEST_ESP_OK(i2c_param_config( I2C_SLAVE_NUM, &conf_slave));
TEST_ESP_OK(i2c_param_config(I2C_SLAVE_NUM, &conf_slave));
TEST_ESP_OK(i2c_driver_install(I2C_SLAVE_NUM, I2C_MODE_SLAVE,
I2C_SLAVE_RX_BUF_LEN,
I2C_SLAVE_TX_BUF_LEN, 0));
@ -135,7 +131,7 @@ static void i2c_slave_read_write_test(void)
unity_send_signal("master write");
unity_wait_for_signal("slave read");
size_rd = i2c_slave_read_buffer( I2C_SLAVE_NUM, data_rd, RW_TEST_LENGTH, 10000 / portTICK_PERIOD_MS);
size_rd = i2c_slave_read_buffer(I2C_SLAVE_NUM, data_rd, RW_TEST_LENGTH, 10000 / portTICK_PERIOD_MS);
ESP_LOGI(TAG, "Slave read data:");
ESP_LOG_BUFFER_HEX(TAG, data_rd, size_rd);
TEST_ASSERT_EQUAL_HEX8_ARRAY(expected_master_write_data, data_rd, RW_TEST_LENGTH);

92
components/ulp/test_apps/ulp_fsm/main/test_ulp.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2010-2022 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2010-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -34,7 +34,8 @@ extern const uint8_t ulp_test_app_bin_end[] asm("_binary_ulp_test_app_bin_end"
#define HEX_DUMP_DEBUG 0
static void hexdump(const uint32_t* src, size_t count) {
static void hexdump(const uint32_t* src, size_t count)
{
#if HEX_DUMP_DEBUG
for (size_t i = 0; i < count; ++i) {
printf("%08x ", *src);
@ -68,7 +69,7 @@ TEST_CASE("ULP FSM addition test", "[ulp]")
RTC_SLOW_MEM[17] = 11;
/* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ASSERT_EQUAL(ESP_OK, ulp_process_macros_and_load(0, program, &size));
TEST_ASSERT_EQUAL(ESP_OK, ulp_run(0));
@ -107,7 +108,7 @@ TEST_CASE("ULP FSM subtraction and branch test", "[ulp]")
RTC_SLOW_MEM[33] = 18;
/* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ASSERT_EQUAL(ESP_OK, ulp_process_macros_and_load(0, program, &size));
TEST_ASSERT_EQUAL(ESP_OK, ulp_run(0));
printf("\n\n");
@ -131,7 +132,7 @@ TEST_CASE("ULP FSM JUMPS instruction test", "[ulp]")
* This ULP program is written in assembly. Please refer associated .S file.
*/
esp_err_t err = ulp_load_binary(0, ulp_test_app_bin_start,
(ulp_test_app_bin_end - ulp_test_app_bin_start) / sizeof(uint32_t));
(ulp_test_app_bin_end - ulp_test_app_bin_start) / sizeof(uint32_t));
TEST_ESP_OK(err);
/* Clear ULP FSM raw interrupt */
@ -178,7 +179,7 @@ TEST_CASE("ULP FSM light-sleep wakeup test", "[ulp]")
};
/* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ASSERT_EQUAL(ESP_OK, ulp_process_macros_and_load(0, program, &size));
TEST_ASSERT_EQUAL(ESP_OK, ulp_run(0));
@ -223,7 +224,7 @@ static void ulp_fsm_deepsleep_wakeup_test(void)
};
/* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ASSERT_EQUAL(ESP_OK, ulp_process_macros_and_load(0, program, &size));
TEST_ASSERT_EQUAL(ESP_OK, ulp_run(0));
@ -246,7 +247,6 @@ TEST_CASE_MULTIPLE_STAGES("ULP FSM deep-sleep wakeup test", "[deepsleep][reset=D
ulp_fsm_deepsleep_wakeup_test,
check_sleep_reset)
TEST_CASE("ULP FSM can write and read peripheral registers", "[ulp]")
{
assert(CONFIG_ULP_COPROC_RESERVE_MEM >= 260 && "this test needs ULP_COPROC_RESERVE_MEM option set in menuconfig");
@ -261,36 +261,36 @@ TEST_CASE("ULP FSM can write and read peripheral registers", "[ulp]")
/* ULP co-processor program to read from and write to peripheral registers */
const ulp_insn_t program[] = {
I_MOVI(R1, 64), // r1 = 64
I_RD_REG(RTC_CNTL_STORE1_REG, 0, 15), // r0 = REG_READ(RTC_CNTL_STORE1_REG[15:0])
I_ST(R0, R1, 0), // mem[r1 + 0] = r0
I_RD_REG(RTC_CNTL_STORE1_REG, 4, 11), // r0 = REG_READ(RTC_CNTL_STORE1_REG[11:4])
I_ST(R0, R1, 1), // mem[r1 + 1] = r0
I_RD_REG(RTC_CNTL_STORE1_REG, 16, 31), // r0 = REG_READ(RTC_CNTL_STORE1_REG[31:16])
I_ST(R0, R1, 2), // mem[r1 + 2] = r0
I_RD_REG(RTC_CNTL_STORE1_REG, 20, 27), // r0 = REG_READ(RTC_CNTL_STORE1_REG[27:20])
I_ST(R0, R1, 3), // mem[r1 + 3] = r0
I_WR_REG(RTC_CNTL_STORE0_REG, 0, 7, 0x89), // REG_WRITE(RTC_CNTL_STORE0_REG[7:0], 0x89)
I_WR_REG(RTC_CNTL_STORE0_REG, 8, 15, 0xab), // REG_WRITE(RTC_CNTL_STORE0_REG[15:8], 0xab)
I_WR_REG(RTC_CNTL_STORE0_REG, 16, 23, 0xcd), // REG_WRITE(RTC_CNTL_STORE0_REG[23:16], 0xcd)
I_WR_REG(RTC_CNTL_STORE0_REG, 24, 31, 0xef), // REG_WRITE(RTC_CNTL_STORE0_REG[31:24], 0xef)
I_LD(R0, R1, 4), // r0 = mem[r1 + 4]
I_ADDI(R0, R0, 1), // r0 = r0 + 1
I_ST(R0, R1, 4), // mem[r1 + 4] = r0
I_END(), // stop ULP timer
I_HALT() // halt
I_MOVI(R1, 64), // r1 = 64
I_RD_REG(RTC_CNTL_STORE1_REG, 0, 15), // r0 = REG_READ(RTC_CNTL_STORE1_REG[15:0])
I_ST(R0, R1, 0), // mem[r1 + 0] = r0
I_RD_REG(RTC_CNTL_STORE1_REG, 4, 11), // r0 = REG_READ(RTC_CNTL_STORE1_REG[11:4])
I_ST(R0, R1, 1), // mem[r1 + 1] = r0
I_RD_REG(RTC_CNTL_STORE1_REG, 16, 31), // r0 = REG_READ(RTC_CNTL_STORE1_REG[31:16])
I_ST(R0, R1, 2), // mem[r1 + 2] = r0
I_RD_REG(RTC_CNTL_STORE1_REG, 20, 27), // r0 = REG_READ(RTC_CNTL_STORE1_REG[27:20])
I_ST(R0, R1, 3), // mem[r1 + 3] = r0
I_WR_REG(RTC_CNTL_STORE0_REG, 0, 7, 0x89), // REG_WRITE(RTC_CNTL_STORE0_REG[7:0], 0x89)
I_WR_REG(RTC_CNTL_STORE0_REG, 8, 15, 0xab), // REG_WRITE(RTC_CNTL_STORE0_REG[15:8], 0xab)
I_WR_REG(RTC_CNTL_STORE0_REG, 16, 23, 0xcd), // REG_WRITE(RTC_CNTL_STORE0_REG[23:16], 0xcd)
I_WR_REG(RTC_CNTL_STORE0_REG, 24, 31, 0xef), // REG_WRITE(RTC_CNTL_STORE0_REG[31:24], 0xef)
I_LD(R0, R1, 4), // r0 = mem[r1 + 4]
I_ADDI(R0, R0, 1), // r0 = r0 + 1
I_ST(R0, R1, 4), // mem[r1 + 4] = r0
I_END(), // stop ULP timer
I_HALT() // halt
};
/* Set data in the peripheral register to be read by the ULP co-processor */
REG_WRITE(RTC_CNTL_STORE1_REG, 0x89abcdef);
/* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ESP_OK(ulp_process_macros_and_load(0, program, &size));
TEST_ESP_OK(ulp_run(0));
/* Wait for the ULP co-processor to finish up */
vTaskDelay(100/portTICK_PERIOD_MS);
vTaskDelay(100 / portTICK_PERIOD_MS);
/* Verify the test results */
TEST_ASSERT_EQUAL_HEX32(0xefcdab89, REG_READ(RTC_CNTL_STORE0_REG));
@ -328,13 +328,13 @@ TEST_CASE("ULP FSM I_WR_REG instruction test", "[ulp]")
};
const size_t test_items_count =
sizeof(test_items)/sizeof(test_items[0]);
sizeof(test_items) / sizeof(test_items[0]);
for (size_t i = 0; i < test_items_count; ++i) {
const uint32_t mask = (uint32_t) (((1ULL << test_items[i].width) - 1) << test_items[i].low);
const uint32_t mask = (uint32_t)(((1ULL << test_items[i].width) - 1) << test_items[i].low);
const uint32_t not_mask = ~mask;
printf("#%2d: low: %2d width: %2d mask: %08" PRIx32 " expected: %08" PRIx32 " ", i,
test_items[i].low, test_items[i].width,
mask, not_mask);
test_items[i].low, test_items[i].width,
mask, not_mask);
/* Set all bits in RTC_CNTL_STORE0_REG and reset all bits in RTC_CNTL_STORE1_REG */
uint32_t rtc_store0 = REG_READ(RTC_CNTL_STORE0_REG);
@ -345,24 +345,24 @@ TEST_CASE("ULP FSM I_WR_REG instruction test", "[ulp]")
/* ULP co-processor program to write to peripheral registers */
const ulp_insn_t program[] = {
I_WR_REG(RTC_CNTL_STORE0_REG,
test_items[i].low,
test_items[i].low + test_items[i].width - 1,
0),
test_items[i].low,
test_items[i].low + test_items[i].width - 1,
0),
I_WR_REG(RTC_CNTL_STORE1_REG,
test_items[i].low,
test_items[i].low + test_items[i].width - 1,
0xff & ((1 << test_items[i].width) - 1)),
test_items[i].low,
test_items[i].low + test_items[i].width - 1,
0xff & ((1 << test_items[i].width) - 1)),
I_END(),
I_HALT()
};
/* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ESP_OK(ulp_process_macros_and_load(0, program, &size));
TEST_ESP_OK(ulp_run(0));
/* Wait for the ULP co-processor to finish up */
vTaskDelay(10/portTICK_PERIOD_MS);
vTaskDelay(10 / portTICK_PERIOD_MS);
/* Verify the test results */
uint32_t clear = REG_READ(RTC_CNTL_STORE0_REG);
@ -378,9 +378,6 @@ TEST_CASE("ULP FSM I_WR_REG instruction test", "[ulp]")
}
}
TEST_CASE("ULP FSM timer setting", "[ulp]")
{
assert(CONFIG_ULP_COPROC_RESERVE_MEM >= 32 && "this test needs ULP_COPROC_RESERVE_MEM option set in menuconfig");
@ -403,7 +400,7 @@ TEST_CASE("ULP FSM timer setting", "[ulp]")
};
/* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ESP_OK(ulp_process_macros_and_load(0, program, &size));
assert(offset >= size && "data offset needs to be greater or equal to program size");
TEST_ESP_OK(ulp_run(0));
@ -418,7 +415,8 @@ TEST_CASE("ULP FSM timer setting", "[ulp]")
100000, // 100 ms
200000, // 200 ms
500000, // 500 ms
1000000 }; // 1 sec
1000000
}; // 1 sec
const size_t tests_count = sizeof(cycles_to_test) / sizeof(cycles_to_test[0]);
for (size_t i = 0; i < tests_count; ++i) {
@ -474,7 +472,7 @@ TEST_CASE("ULP FSM interrupt signal can be handled via ISRs on the main core", "
TEST_ASSERT_EQUAL(ESP_OK, ulp_isr_register(ulp_isr, (void *)ulp_isr_sem));
/* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ASSERT_EQUAL(ESP_OK, ulp_process_macros_and_load(0, program, &size));
TEST_ASSERT_EQUAL(ESP_OK, ulp_run(0));
@ -482,7 +480,7 @@ TEST_CASE("ULP FSM interrupt signal can be handled via ISRs on the main core", "
TEST_ASSERT_EQUAL(pdTRUE, xSemaphoreTake(ulp_isr_sem, portMAX_DELAY));
/* Deregister the ISR */
TEST_ASSERT_EQUAL(ESP_OK, ulp_isr_deregister(ulp_isr, (void *)ulp_isr_sem ));
TEST_ASSERT_EQUAL(ESP_OK, ulp_isr_deregister(ulp_isr, (void *)ulp_isr_sem));
/* Delete test semaphore */
vSemaphoreDelete(ulp_isr_sem);

86
components/ulp/test_apps/ulp_fsm/main/test_ulp_manual.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2010-2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2010-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -43,29 +43,29 @@ void ulp_fsm_controls_rtc_io(void)
I_MOVI(R0, 0), // r0 is LED state
I_MOVI(R2, 16), // loop r2 from 16 down to 0
M_LABEL(4), // define label 4
I_SUBI(R2, R2, 1), // r2 = r2 - 1
M_BXZ(6), // branch to label 6 if r2 = 0
I_ADDI(R0, R0, 1), // r0 = (r0 + 1) % 2
I_ANDI(R0, R0, 0x1),
M_BL(0, 1), // if r0 < 1 goto 0
M_LABEL(1), // define label 1
I_WR_REG(RTC_GPIO_OUT_REG, 26, 27, 1), // RTC_GPIO12 = 1
M_BX(2), // goto 2
M_LABEL(0), // define label 0
I_WR_REG(RTC_GPIO_OUT_REG, 26, 27, 0), // RTC_GPIO12 = 0
M_LABEL(2), // define label 2
I_MOVI(R1, 100), // loop R1 from 100 down to 0
M_LABEL(3), // define label 3
I_SUBI(R1, R1, 1), // r1 = r1 - 1
M_BXZ(5), // branch to label 5 if r1 = 0
I_DELAY(32000), // delay for a while
M_BX(3), // goto 3
M_LABEL(5), // define label 5
M_BX(4), // loop back to label 4
I_SUBI(R2, R2, 1), // r2 = r2 - 1
M_BXZ(6), // branch to label 6 if r2 = 0
I_ADDI(R0, R0, 1), // r0 = (r0 + 1) % 2
I_ANDI(R0, R0, 0x1),
M_BL(0, 1), // if r0 < 1 goto 0
M_LABEL(1), // define label 1
I_WR_REG(RTC_GPIO_OUT_REG, 26, 27, 1), // RTC_GPIO12 = 1
M_BX(2), // goto 2
M_LABEL(0), // define label 0
I_WR_REG(RTC_GPIO_OUT_REG, 26, 27, 0), // RTC_GPIO12 = 0
M_LABEL(2), // define label 2
I_MOVI(R1, 100), // loop R1 from 100 down to 0
M_LABEL(3), // define label 3
I_SUBI(R1, R1, 1), // r1 = r1 - 1
M_BXZ(5), // branch to label 5 if r1 = 0
I_DELAY(32000), // delay for a while
M_BX(3), // goto 3
M_LABEL(5), // define label 5
M_BX(4), // loop back to label 4
M_LABEL(6), // define label 6
I_WAKE(), // wake up the SoC
I_END(), // stop ULP program timer
I_HALT()
I_WAKE(), // wake up the SoC
I_END(), // stop ULP program timer
I_HALT()
};
/* Configure LED GPIOs */
@ -74,14 +74,14 @@ void ulp_fsm_controls_rtc_io(void)
GPIO_NUM_0,
GPIO_NUM_4
};
for (size_t i = 0; i < sizeof(led_gpios)/sizeof(led_gpios[0]); ++i) {
for (size_t i = 0; i < sizeof(led_gpios) / sizeof(led_gpios[0]); ++i) {
rtc_gpio_init(led_gpios[i]);
rtc_gpio_set_direction(led_gpios[i], RTC_GPIO_MODE_OUTPUT_ONLY);
rtc_gpio_set_level(led_gpios[i], 0);
}
/* Calculate the size of the ULP co-processor binary, load it and run the ULP coprocessor */
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ESP_OK(ulp_process_macros_and_load(0, program, &size));
TEST_ESP_OK(ulp_run(0));
@ -155,18 +155,18 @@ void ulp_fsm_temp_sens(void)
I_SUBI(R3, R3, 1), // end = length - 1
I_SUBR(R3, R3, R2), // r3 = length - counter
M_BXF(1), // if overflow goto 1:
I_TSENS(R0, 16383), // r0 <- tsens
I_ST(R0, R2, offset + 4), // mem[r2 + offset +4] <- r0
I_ADDI(R2, R2, 1), // counter += 1
I_ST(R2, R1, 1), // save counter
I_HALT(), // enter sleep
I_TSENS(R0, 16383), // r0 <- tsens
I_ST(R0, R2, offset + 4), // mem[r2 + offset +4] <- r0
I_ADDI(R2, R2, 1), // counter += 1
I_ST(R2, R1, 1), // save counter
I_HALT(), // enter sleep
M_LABEL(1), // done with measurements
I_END(), // stop ULP timer
I_WAKE(), // initiate wakeup
I_HALT()
I_END(), // stop ULP timer
I_WAKE(), // initiate wakeup
I_HALT()
};
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ESP_OK(ulp_process_macros_and_load(0, program, &size));
assert(offset >= size);
@ -183,8 +183,6 @@ void ulp_fsm_temp_sens(void)
}
#endif //#if !DISABLED_FOR_TARGETS(ESP32)
void ulp_fsm_adc(void)
{
assert(CONFIG_ULP_COPROC_RESERVE_MEM >= 260 && "this test needs ULP_COPROC_RESERVE_MEM option set in menuconfig");
@ -258,17 +256,17 @@ void ulp_fsm_adc(void)
I_SUBI(R3, R3, 1), // end = length - 1
I_SUBR(R3, R3, R2), // r3 = length - counter
M_BXF(1), // if overflow goto 1:
I_ADC(R0, adc, channel), // r0 <- ADC
I_ST(R0, R2, offset + 4), // mem[r2 + offset +4] = r0
I_ADDI(R2, R2, 1), // counter += 1
I_ST(R2, R1, 1), // save counter
I_HALT(), // enter sleep
I_ADC(R0, adc, channel), // r0 <- ADC
I_ST(R0, R2, offset + 4), // mem[r2 + offset +4] = r0
I_ADDI(R2, R2, 1), // counter += 1
I_ST(R2, R1, 1), // save counter
I_HALT(), // enter sleep
M_LABEL(1), // done with measurements
I_END(), // stop ULP program timer
I_HALT()
I_END(), // stop ULP program timer
I_HALT()
};
size_t size = sizeof(program)/sizeof(ulp_insn_t);
size_t size = sizeof(program) / sizeof(ulp_insn_t);
TEST_ESP_OK(ulp_process_macros_and_load(0, program, &size));
assert(offset >= size);

32
components/ulp/test_apps/ulp_riscv/main/test_ulp_riscv.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2010-2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2010-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -261,8 +261,6 @@ TEST_CASE("ULP-RISC-V can stop itself and be resumed from the main CPU", "[ulp]"
TEST_ASSERT(ulp_riscv_is_running(&ulp_riscv_counter));
}
TEST_CASE("ULP-RISC-V mutex", "[ulp]")
{
/* Load ULP RISC-V firmware and start the ULP RISC-V Coprocessor */
@ -281,17 +279,16 @@ TEST_CASE("ULP-RISC-V mutex", "[ulp]")
ulp_riscv_lock_release(lock);
}
while(ulp_main_cpu_reply != RISCV_COMMAND_OK) {
while (ulp_main_cpu_reply != RISCV_COMMAND_OK) {
// Wait for ULP to finish
}
/* If the variable is protected there should be no race conditions
results should be the sum of increments made by ULP and by main CPU
*/
TEST_ASSERT_EQUAL(2*MUTEX_TEST_ITERATIONS, ulp_riscv_incrementer);
TEST_ASSERT_EQUAL(2 * MUTEX_TEST_ITERATIONS, ulp_riscv_incrementer);
}
static void do_ulp_wakeup_deepsleep(riscv_test_commands_t ulp_cmd, bool rtc_periph_pd)
{
if (!rtc_periph_pd) {
@ -325,9 +322,8 @@ static void do_ulp_wakeup_after_long_delay_deepsleep(void)
/* Certain erroneous wake-up triggers happen only after sleeping for a few seconds */
TEST_CASE_MULTIPLE_STAGES("ULP-RISC-V is able to wakeup main CPU from deep sleep after a long delay", "[ulp]",
do_ulp_wakeup_after_long_delay_deepsleep,
check_reset_reason_ulp_wakeup);
do_ulp_wakeup_after_long_delay_deepsleep,
check_reset_reason_ulp_wakeup);
static void do_ulp_wakeup_after_long_delay_deepsleep_rtc_perip_on(void)
{
@ -335,8 +331,8 @@ static void do_ulp_wakeup_after_long_delay_deepsleep_rtc_perip_on(void)
}
TEST_CASE_MULTIPLE_STAGES("ULP-RISC-V is able to wakeup main CPU from deep sleep after a long delay, RTC periph powerup", "[ulp]",
do_ulp_wakeup_after_long_delay_deepsleep_rtc_perip_on,
check_reset_reason_ulp_wakeup);
do_ulp_wakeup_after_long_delay_deepsleep_rtc_perip_on,
check_reset_reason_ulp_wakeup);
static void do_ulp_wakeup_after_short_delay_deepsleep(void)
{
@ -344,9 +340,8 @@ static void do_ulp_wakeup_after_short_delay_deepsleep(void)
}
TEST_CASE_MULTIPLE_STAGES("ULP-RISC-V is able to wakeup main CPU from deep sleep after a short delay", "[ulp]",
do_ulp_wakeup_after_short_delay_deepsleep,
check_reset_reason_ulp_wakeup);
do_ulp_wakeup_after_short_delay_deepsleep,
check_reset_reason_ulp_wakeup);
static void do_ulp_wakeup_after_short_delay_deepsleep_rtc_perip_on(void)
{
@ -354,8 +349,8 @@ static void do_ulp_wakeup_after_short_delay_deepsleep_rtc_perip_on(void)
}
TEST_CASE_MULTIPLE_STAGES("ULP-RISC-V is able to wakeup main CPU from deep sleep after a short delay, RTC periph powerup", "[ulp]",
do_ulp_wakeup_after_short_delay_deepsleep_rtc_perip_on,
check_reset_reason_ulp_wakeup);
do_ulp_wakeup_after_short_delay_deepsleep_rtc_perip_on,
check_reset_reason_ulp_wakeup);
typedef struct {
SemaphoreHandle_t ulp_isr_sw_sem;
@ -393,7 +388,7 @@ TEST_CASE("ULP-RISC-V interrupt signals can be handled via ISRs on the main core
/* Register ULP RISC-V signal ISR */
TEST_ASSERT_EQUAL(ESP_OK, ulp_riscv_isr_register(ulp_riscv_isr, (void *)&test_sem_cfg,
(ULP_RISCV_SW_INT | ULP_RISCV_TRAP_INT)));
(ULP_RISCV_SW_INT | ULP_RISCV_TRAP_INT)));
/* Load ULP RISC-V firmware and start the ULP RISC-V Coprocessor */
printf("Loading good ULP firmware\n");
@ -425,7 +420,7 @@ TEST_CASE("ULP-RISC-V interrupt signals can be handled via ISRs on the main core
/* Deregister the ISR */
TEST_ASSERT_EQUAL(ESP_OK, ulp_riscv_isr_deregister(ulp_riscv_isr, (void *)&test_sem_cfg,
(ULP_RISCV_SW_INT | ULP_RISCV_TRAP_INT)));
(ULP_RISCV_SW_INT | ULP_RISCV_TRAP_INT)));
/* Delete test semaphores */
vSemaphoreDelete(test_sem_cfg.ulp_isr_sw_sem);
@ -445,7 +440,6 @@ TEST_CASE("ULP-RISC-V interrupt signals can be handled via ISRs on the main core
TEST_CASE("ULP ADC can init-deinit-init", "[ulp]")
{
ulp_adc_cfg_t riscv_adc_cfg = {
.adc_n = ADC_UNIT,
.channel = CHANNEL,

131
components/ulp/test_apps/ulp_riscv/main/ulp/test_main.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2010-2022 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2010-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -12,7 +12,6 @@
#include "ulp_riscv_lock_ulp_core.h"
#include "ulp_test_shared.h"
volatile riscv_test_commands_t main_cpu_command = RISCV_NO_COMMAND;
volatile riscv_test_command_reply_t main_cpu_reply = RISCV_COMMAND_INVALID;
volatile riscv_test_commands_t command_resp = RISCV_NO_COMMAND;
@ -28,96 +27,96 @@ void handle_commands(riscv_test_commands_t cmd)
riscv_counter++;
switch (cmd) {
case RISCV_READ_WRITE_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_READ_WRITE_TEST;
case RISCV_READ_WRITE_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_READ_WRITE_TEST;
/* Process test data */
riscv_test_data_out = riscv_test_data_in ^ XOR_MASK;
/* Process test data */
riscv_test_data_out = riscv_test_data_in ^ XOR_MASK;
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
/* Wakeup the main CPU */
ulp_riscv_wakeup_main_processor();
break;
/* Wakeup the main CPU */
ulp_riscv_wakeup_main_processor();
break;
case RISCV_DEEP_SLEEP_WAKEUP_SHORT_DELAY_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_DEEP_SLEEP_WAKEUP_SHORT_DELAY_TEST;
case RISCV_DEEP_SLEEP_WAKEUP_SHORT_DELAY_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_DEEP_SLEEP_WAKEUP_SHORT_DELAY_TEST;
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
ulp_riscv_delay_cycles(1000 * ULP_RISCV_CYCLES_PER_MS);
ulp_riscv_delay_cycles(1000 * ULP_RISCV_CYCLES_PER_MS);
/* Wakeup the main CPU */
ulp_riscv_wakeup_main_processor();
break;
/* Wakeup the main CPU */
ulp_riscv_wakeup_main_processor();
break;
case RISCV_DEEP_SLEEP_WAKEUP_LONG_DELAY_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_DEEP_SLEEP_WAKEUP_LONG_DELAY_TEST;
case RISCV_DEEP_SLEEP_WAKEUP_LONG_DELAY_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_DEEP_SLEEP_WAKEUP_LONG_DELAY_TEST;
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
ulp_riscv_delay_cycles(10000 * ULP_RISCV_CYCLES_PER_MS);
ulp_riscv_delay_cycles(10000 * ULP_RISCV_CYCLES_PER_MS);
/* Wakeup the main CPU */
ulp_riscv_wakeup_main_processor();
break;
/* Wakeup the main CPU */
ulp_riscv_wakeup_main_processor();
break;
case RISCV_LIGHT_SLEEP_WAKEUP_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_LIGHT_SLEEP_WAKEUP_TEST;
case RISCV_LIGHT_SLEEP_WAKEUP_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_LIGHT_SLEEP_WAKEUP_TEST;
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
/* Wakeup the main CPU */
ulp_riscv_wakeup_main_processor();
break;
/* Wakeup the main CPU */
ulp_riscv_wakeup_main_processor();
break;
case RISCV_STOP_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_STOP_TEST;
case RISCV_STOP_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_STOP_TEST;
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
/* Will never return from here */
ulp_riscv_timer_stop();
ulp_riscv_halt();
/* Will never return from here */
ulp_riscv_timer_stop();
ulp_riscv_halt();
break;
break;
case RISCV_MUTEX_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_MUTEX_TEST;
case RISCV_MUTEX_TEST:
/* Echo the command ID back to the main CPU */
command_resp = RISCV_MUTEX_TEST;
for (int i = 0; i < MUTEX_TEST_ITERATIONS; i++) {
ulp_riscv_lock_acquire(&lock);
riscv_incrementer++;
ulp_riscv_lock_release(&lock);
}
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
main_cpu_command = RISCV_NO_COMMAND;
for (int i = 0; i < MUTEX_TEST_ITERATIONS; i++) {
ulp_riscv_lock_acquire(&lock);
riscv_incrementer++;
ulp_riscv_lock_release(&lock);
}
/* Set the command reply status */
main_cpu_reply = RISCV_COMMAND_OK;
main_cpu_command = RISCV_NO_COMMAND;
break;
break;
case RISCV_NO_COMMAND:
main_cpu_reply = RISCV_COMMAND_OK;
break;
case RISCV_NO_COMMAND:
main_cpu_reply = RISCV_COMMAND_OK;
break;
default:
main_cpu_reply = RISCV_COMMAND_NOK;
break;
default:
main_cpu_reply = RISCV_COMMAND_NOK;
break;
}
}
int main (void)
int main(void)
{
while (1) {

2
components/ulp/test_apps/ulp_riscv/main/ulp/test_main_cocpu_crash.c
Wyświetl plik

@ -8,7 +8,7 @@
#include <stdint.h>
#include "ulp_riscv_utils.h"
int main (void)
int main(void)
{
// Wait for the main core in the test case to enter lightsleep
ulp_riscv_delay_cycles(100 * ULP_RISCV_CYCLES_PER_MS);

2
components/ulp/test_apps/ulp_riscv/main/ulp/test_main_second_cocpu_firmware.c
Wyświetl plik

@ -8,7 +8,7 @@
volatile uint32_t riscv_counter2 = 0;
int main (void)
int main(void)
{
riscv_counter2++;

2
components/ulp/test_apps/ulp_riscv/main/ulp/ulp_test_shared.h
Wyświetl plik

@ -8,7 +8,7 @@
#define MUTEX_TEST_ITERATIONS 100000
#define XOR_MASK 0xDEADBEEF
typedef enum{
typedef enum {
RISCV_READ_WRITE_TEST = 1,
RISCV_DEEP_SLEEP_WAKEUP_SHORT_DELAY_TEST,
RISCV_DEEP_SLEEP_WAKEUP_LONG_DELAY_TEST,

8
components/ulp/ulp_common/ulp_common.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -28,8 +28,8 @@ esp_err_t ulp_set_wakeup_period(size_t period_index, uint32_t period_us)
#if CONFIG_IDF_TARGET_ESP32
uint64_t period_cycles = (period_us_64 << RTC_CLK_CAL_FRACT) / esp_clk_slowclk_cal_get();
uint64_t min_sleep_period_cycles = ULP_FSM_PREPARE_SLEEP_CYCLES
+ ULP_FSM_WAKEUP_SLEEP_CYCLES
+ REG_GET_FIELD(RTC_CNTL_TIMER2_REG, RTC_CNTL_ULPCP_TOUCH_START_WAIT);
+ ULP_FSM_WAKEUP_SLEEP_CYCLES
+ REG_GET_FIELD(RTC_CNTL_TIMER2_REG, RTC_CNTL_ULPCP_TOUCH_START_WAIT);
if (period_cycles < min_sleep_period_cycles) {
period_cycles = min_sleep_period_cycles;
ESP_LOGW("ulp", "Sleep period clipped to minimum of %"PRIu32" cycles", (uint32_t) min_sleep_period_cycles);
@ -37,7 +37,7 @@ esp_err_t ulp_set_wakeup_period(size_t period_index, uint32_t period_us)
period_cycles -= min_sleep_period_cycles;
}
REG_SET_FIELD(SENS_ULP_CP_SLEEP_CYC0_REG + period_index * sizeof(uint32_t),
SENS_SLEEP_CYCLES_S0, (uint32_t) period_cycles);
SENS_SLEEP_CYCLES_S0, (uint32_t) period_cycles);
#elif defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3)
soc_rtc_slow_clk_src_t slow_clk_src = rtc_clk_slow_src_get();
rtc_cal_sel_t cal_clk = RTC_CAL_RTC_MUX;

17
components/ulp/ulp_fsm/include/esp32/ulp.h
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2016-2022 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2016-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -22,7 +22,6 @@ extern "C" {
* @{
*/
#define R0 0 /*!< general purpose register 0 */
#define R1 1 /*!< general purpose register 1 */
#define R2 2 /*!< general purpose register 2 */
@ -102,7 +101,6 @@ extern "C" {
#define SUB_OPCODE_MACRO_LABELPC 2 /*!< Label pointer macro */
/**@}*/
/**
* @brief Instruction format structure
*
@ -306,7 +304,8 @@ union ulp_insn {
* @param reg peripheral register in RTC_CNTL_, RTC_IO_, SENS_, RTC_I2C peripherals.
* @return periph_sel value for the peripheral to which this register belongs.
*/
static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg) {
static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg)
{
uint32_t ret = 3;
if (reg < DR_REG_RTCCNTL_BASE) {
assert(0 && "invalid register base");
@ -314,9 +313,9 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg) {
ret = RD_REG_PERIPH_RTC_CNTL;
} else if (reg < DR_REG_SENS_BASE) {
ret = RD_REG_PERIPH_RTC_IO;
} else if (reg < DR_REG_RTC_I2C_BASE){
} else if (reg < DR_REG_RTC_I2C_BASE) {
ret = RD_REG_PERIPH_SENS;
} else if (reg < DR_REG_IO_MUX_BASE){
} else if (reg < DR_REG_IO_MUX_BASE) {
ret = RD_REG_PERIPH_RTC_I2C;
} else {
assert(0 && "invalid register base");
@ -465,7 +464,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg) {
.sub_opcode = SUB_OPCODE_ST, \
.opcode = OPCODE_ST } }
/**
* Load value from RTC memory into reg_dest register.
*
@ -480,7 +478,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg) {
.unused2 = 0, \
.opcode = OPCODE_LD } }
/**
* Branch relative if R0 less than immediate value.
*
@ -596,7 +593,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg) {
.sub_opcode = SUB_OPCODE_BX, \
.opcode = OPCODE_BRANCH } }
/**
* Addition: dest = src1 + src2
*/
@ -669,7 +665,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg) {
.sub_opcode = SUB_OPCODE_ALU_REG, \
.opcode = OPCODE_ALU } }
/**
* Logical shift right: dest = src >> shift
*/
@ -694,7 +689,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg) {
.sub_opcode = SUB_OPCODE_ALU_IMM, \
.opcode = OPCODE_ALU } }
/**
* Subtract register and an immediate value: dest = src - imm
*/
@ -755,7 +749,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg) {
.sub_opcode = SUB_OPCODE_ALU_IMM, \
.opcode = OPCODE_ALU } }
/**
* Logical shift right register value by an immediate: dest = val >> imm
*/

4
components/ulp/ulp_fsm/include/esp32s2/ulp.h
Wyświetl plik

@ -22,7 +22,6 @@ extern "C" {
* @{
*/
#define R0 0 /*!< general purpose register 0 */
#define R1 1 /*!< general purpose register 1 */
#define R2 2 /*!< general purpose register 2 */
@ -906,7 +905,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg)
.sub_opcode = SUB_OPCODE_ALU_REG, \
.opcode = OPCODE_ALU } }
/**
* Logical shift right: dest = src >> shift
*/
@ -933,7 +931,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg)
.sub_opcode = SUB_OPCODE_ALU_IMM, \
.opcode = OPCODE_ALU } }
/**
* Subtract register and an immediate value: dest = src - imm
*/
@ -999,7 +996,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg)
.sub_opcode = SUB_OPCODE_ALU_IMM, \
.opcode = OPCODE_ALU } }
/**
* Logical shift right register value by an immediate: dest = val >> imm
*/

4
components/ulp/ulp_fsm/include/esp32s3/ulp.h
Wyświetl plik

@ -22,7 +22,6 @@ extern "C" {
* @{
*/
#define R0 0 /*!< general purpose register 0 */
#define R1 1 /*!< general purpose register 1 */
#define R2 2 /*!< general purpose register 2 */
@ -906,7 +905,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg)
.sub_opcode = SUB_OPCODE_ALU_REG, \
.opcode = OPCODE_ALU } }
/**
* Logical shift right: dest = src >> shift
*/
@ -933,7 +931,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg)
.sub_opcode = SUB_OPCODE_ALU_IMM, \
.opcode = OPCODE_ALU } }
/**
* Subtract register and an immediate value: dest = src - imm
*/
@ -999,7 +996,6 @@ static inline uint32_t SOC_REG_TO_ULP_PERIPH_SEL(uint32_t reg)
.sub_opcode = SUB_OPCODE_ALU_IMM, \
.opcode = OPCODE_ALU } }
/**
* Logical shift right register value by an immediate: dest = val >> imm
*/

10
components/ulp/ulp_fsm/ulp.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2010-2022 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2010-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -93,7 +93,7 @@ esp_err_t ulp_run(uint32_t entry_point)
REG_SET_FIELD(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_PC_INIT, entry_point);
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SEL); // Select ULP_TIMER trigger target for ULP.
// start ULP clock gate.
SET_PERI_REG_MASK(RTC_CNTL_ULP_CP_CTRL_REG ,RTC_CNTL_ULP_CP_CLK_FO);
SET_PERI_REG_MASK(RTC_CNTL_ULP_CP_CTRL_REG, RTC_CNTL_ULP_CP_CLK_FO);
// ULP FSM sends the DONE signal.
CLEAR_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_DONE_FORCE);
#if CONFIG_IDF_TARGET_ESP32S3
@ -133,11 +133,11 @@ esp_err_t ulp_load_binary(uint32_t load_addr, const uint8_t* program_binary, siz
}
size_t total_size = (size_t) header.text_offset + (size_t) header.text_size +
(size_t) header.data_size;
(size_t) header.data_size;
ESP_LOGD(TAG, "program_size_bytes: %d total_size: %d offset: %d .text: %d, .data: %d, .bss: %d",
program_size_bytes, total_size, header.text_offset,
header.text_size, header.data_size, header.bss_size);
program_size_bytes, total_size, header.text_offset,
header.text_size, header.data_size, header.bss_size);
if (total_size != program_size_bytes) {
return ESP_ERR_INVALID_SIZE;

119
components/ulp/ulp_fsm/ulp_macro.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2010-2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2010-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -84,7 +84,6 @@ static int reloc_sort_func(const void* p_lhs, const void* p_rhs)
return 0;
}
/* Processing branch and label macros involves four steps:
*
* 1. Iterate over program and count all instructions
@ -124,52 +123,52 @@ static int reloc_sort_func(const void* p_lhs, const void* p_rhs)
*/
static esp_err_t do_single_reloc(ulp_insn_t* program, uint32_t load_addr,
reloc_info_t label_info, reloc_info_t the_reloc)
reloc_info_t label_info, reloc_info_t the_reloc)
{
size_t insn_offset = the_reloc.addr - load_addr;
ulp_insn_t* insn = &program[insn_offset];
switch (the_reloc.type) {
case RELOC_TYPE_BRANCH: {
// B, BS and BX have the same layout of opcode/sub_opcode fields,
// and share the same opcode. B and BS also have the same layout of
// offset and sign fields.
assert(insn->b.opcode == OPCODE_BRANCH
&& "branch macro was applied to a non-branch instruction");
switch (insn->b.sub_opcode) {
case SUB_OPCODE_B:
case SUB_OPCODE_BS:{
int32_t offset = ((int32_t) label_info.addr) - ((int32_t) the_reloc.addr);
uint32_t abs_offset = abs(offset);
uint32_t sign = (offset >= 0) ? 0 : 1;
if (abs_offset > 127) {
ESP_LOGW(TAG, "target out of range: branch from %x to %x",
the_reloc.addr, label_info.addr);
return ESP_ERR_ULP_BRANCH_OUT_OF_RANGE;
}
insn->b.offset = abs_offset; //== insn->bs.offset = abs_offset;
insn->b.sign = sign; //== insn->bs.sign = sign;
break;
}
case SUB_OPCODE_BX:{
assert(insn->bx.reg == 0 &&
"relocation applied to a jump with offset in register");
insn->bx.addr = label_info.addr;
break;
}
default:
assert(false && "unexpected branch sub-opcode");
case RELOC_TYPE_BRANCH: {
// B, BS and BX have the same layout of opcode/sub_opcode fields,
// and share the same opcode. B and BS also have the same layout of
// offset and sign fields.
assert(insn->b.opcode == OPCODE_BRANCH
&& "branch macro was applied to a non-branch instruction");
switch (insn->b.sub_opcode) {
case SUB_OPCODE_B:
case SUB_OPCODE_BS: {
int32_t offset = ((int32_t) label_info.addr) - ((int32_t) the_reloc.addr);
uint32_t abs_offset = abs(offset);
uint32_t sign = (offset >= 0) ? 0 : 1;
if (abs_offset > 127) {
ESP_LOGW(TAG, "target out of range: branch from %x to %x",
the_reloc.addr, label_info.addr);
return ESP_ERR_ULP_BRANCH_OUT_OF_RANGE;
}
insn->b.offset = abs_offset; //== insn->bs.offset = abs_offset;
insn->b.sign = sign; //== insn->bs.sign = sign;
break;
}
case RELOC_TYPE_LABELPC: {
assert((insn->alu_imm.opcode == OPCODE_ALU && insn->alu_imm.sub_opcode == SUB_OPCODE_ALU_IMM && insn->alu_imm.sel == ALU_SEL_MOV)
&& "pc macro was applied to an incompatible instruction");
insn->alu_imm.imm = label_info.addr;
case SUB_OPCODE_BX: {
assert(insn->bx.reg == 0 &&
"relocation applied to a jump with offset in register");
insn->bx.addr = label_info.addr;
break;
}
default:
assert(false && "unknown reloc type");
assert(false && "unexpected branch sub-opcode");
}
break;
}
case RELOC_TYPE_LABELPC: {
assert((insn->alu_imm.opcode == OPCODE_ALU && insn->alu_imm.sub_opcode == SUB_OPCODE_ALU_IMM && insn->alu_imm.sel == ALU_SEL_MOV)
&& "pc macro was applied to an incompatible instruction");
insn->alu_imm.imm = label_info.addr;
break;
}
default:
assert(false && "unknown reloc type");
}
return ESP_OK;
}
@ -191,12 +190,12 @@ esp_err_t ulp_process_macros_and_load(uint32_t load_addr, const ulp_insn_t* prog
const size_t ulp_mem_end = CONFIG_ULP_COPROC_RESERVE_MEM / sizeof(ulp_insn_t);
if (load_addr > ulp_mem_end) {
ESP_LOGW(TAG, "invalid load address %"PRIx32", max is %x",
load_addr, ulp_mem_end);
load_addr, ulp_mem_end);
return ESP_ERR_ULP_INVALID_LOAD_ADDR;
}
if (real_program_size + load_addr > ulp_mem_end) {
ESP_LOGE(TAG, "program too big: %d words, max is %d words",
real_program_size, ulp_mem_end);
real_program_size, ulp_mem_end);
return ESP_ERR_ULP_SIZE_TOO_BIG;
}
// If no macros found, copy the program and return.
@ -205,7 +204,7 @@ esp_err_t ulp_process_macros_and_load(uint32_t load_addr, const ulp_insn_t* prog
return ESP_OK;
}
reloc_info_t* reloc_info =
(reloc_info_t*) malloc(sizeof(reloc_info_t) * macro_count);
(reloc_info_t*) malloc(sizeof(reloc_info_t) * macro_count);
if (reloc_info == NULL) {
return ESP_ERR_NO_MEM;
}
@ -221,20 +220,20 @@ esp_err_t ulp_process_macros_and_load(uint32_t load_addr, const ulp_insn_t* prog
ulp_insn_t r_insn = *read_ptr;
if (r_insn.macro.opcode == OPCODE_MACRO) {
switch (r_insn.macro.sub_opcode) {
case SUB_OPCODE_MACRO_LABEL:
*cur_reloc = RELOC_INFO_LABEL(r_insn.macro.label,
cur_insn_addr);
break;
case SUB_OPCODE_MACRO_BRANCH:
*cur_reloc = RELOC_INFO_BRANCH(r_insn.macro.label,
cur_insn_addr);
break;
case SUB_OPCODE_MACRO_LABELPC:
*cur_reloc = RELOC_INFO_LABELPC(r_insn.macro.label,
cur_insn_addr);
break;
default:
assert(0 && "invalid sub_opcode for macro insn");
case SUB_OPCODE_MACRO_LABEL:
*cur_reloc = RELOC_INFO_LABEL(r_insn.macro.label,
cur_insn_addr);
break;
case SUB_OPCODE_MACRO_BRANCH:
*cur_reloc = RELOC_INFO_BRANCH(r_insn.macro.label,
cur_insn_addr);
break;
case SUB_OPCODE_MACRO_LABELPC:
*cur_reloc = RELOC_INFO_LABELPC(r_insn.macro.label,
cur_insn_addr);
break;
default:
assert(0 && "invalid sub_opcode for macro insn");
}
++read_ptr;
assert(read_ptr != end && "program can not end with macro insn");
@ -250,20 +249,20 @@ esp_err_t ulp_process_macros_and_load(uint32_t load_addr, const ulp_insn_t* prog
// step 3: sort relocations array
qsort(reloc_info, macro_count, sizeof(reloc_info_t),
reloc_sort_func);
reloc_sort_func);
// step 4: walk relocations array and fix instructions
reloc_info_t* reloc_end = reloc_info + macro_count;
cur_reloc = reloc_info;
while(cur_reloc < reloc_end) {
while (cur_reloc < reloc_end) {
reloc_info_t label_info = *cur_reloc;
assert(label_info.type == RELOC_TYPE_LABEL);
++cur_reloc;
while (cur_reloc < reloc_end) {
if (cur_reloc->type == RELOC_TYPE_LABEL) {
if(cur_reloc->label == label_info.label) {
if (cur_reloc->label == label_info.label) {
ESP_LOGE(TAG, "duplicate label definition: %d",
label_info.label);
label_info.label);
free(reloc_info);
return ESP_ERR_ULP_DUPLICATE_LABEL;
}
@ -271,12 +270,12 @@ esp_err_t ulp_process_macros_and_load(uint32_t load_addr, const ulp_insn_t* prog
}
if (cur_reloc->label != label_info.label) {
ESP_LOGE(TAG, "branch to an inexistent label: %d",
cur_reloc->label);
cur_reloc->label);
free(reloc_info);
return ESP_ERR_ULP_UNDEFINED_LABEL;
}
esp_err_t rc = do_single_reloc(output_program, load_addr,
label_info, *cur_reloc);
label_info, *cur_reloc);
if (rc != ESP_OK) {
free(reloc_info);
return rc;

2
components/ulp/ulp_riscv/include/ulp_riscv.h
Wyświetl plik

@ -112,7 +112,6 @@ esp_err_t ulp_riscv_load_binary(const uint8_t* program_binary, size_t program_si
*/
void ulp_riscv_timer_stop(void);
/**
* @brief Resumes the ULP timer
*
@ -121,7 +120,6 @@ void ulp_riscv_timer_stop(void);
*/
void ulp_riscv_timer_resume(void);
/**
* @brief Halts the program currently running on the ULP-RISC-V
*

20
components/ulp/ulp_riscv/ulp_core/include/ulp_riscv_gpio.h
Wyświetl plik

@ -63,13 +63,13 @@ static inline void ulp_riscv_gpio_init(gpio_num_t gpio_num)
#elif CONFIG_IDF_TARGET_ESP32S3
SET_PERI_REG_MASK(SENS_SAR_PERI_CLK_GATE_CONF_REG, SENS_IOMUX_CLK_EN_M);
#endif
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num*4, RTC_IO_TOUCH_PAD0_MUX_SEL);
REG_SET_FIELD(RTC_IO_TOUCH_PAD0_REG + gpio_num*4, RTC_IO_TOUCH_PAD0_FUN_SEL, 0);
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num * 4, RTC_IO_TOUCH_PAD0_MUX_SEL);
REG_SET_FIELD(RTC_IO_TOUCH_PAD0_REG + gpio_num * 4, RTC_IO_TOUCH_PAD0_FUN_SEL, 0);
}
static inline void ulp_riscv_gpio_deinit(gpio_num_t gpio_num)
{
CLEAR_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num*4, RTC_IO_TOUCH_PAD0_MUX_SEL);
CLEAR_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num * 4, RTC_IO_TOUCH_PAD0_MUX_SEL);
}
static inline void ulp_riscv_gpio_output_enable(gpio_num_t gpio_num)
@ -84,12 +84,12 @@ static inline void ulp_riscv_gpio_output_disable(gpio_num_t gpio_num)
static inline void ulp_riscv_gpio_input_enable(gpio_num_t gpio_num)
{
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num*4, RTC_IO_TOUCH_PAD0_FUN_IE);
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num * 4, RTC_IO_TOUCH_PAD0_FUN_IE);
}
static inline void ulp_riscv_gpio_input_disable(gpio_num_t gpio_num)
{
CLEAR_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num*4, RTC_IO_TOUCH_PAD0_FUN_IE);
CLEAR_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num * 4, RTC_IO_TOUCH_PAD0_FUN_IE);
}
static inline void ulp_riscv_gpio_output_level(gpio_num_t gpio_num, uint8_t level)
@ -108,27 +108,27 @@ static inline uint8_t ulp_riscv_gpio_get_level(gpio_num_t gpio_num)
static inline void ulp_riscv_gpio_set_output_mode(gpio_num_t gpio_num, rtc_io_out_mode_t mode)
{
REG_SET_FIELD(RTC_IO_TOUCH_PAD0_REG + gpio_num*4, RTC_IO_TOUCH_PAD0_DRV, mode);
REG_SET_FIELD(RTC_IO_TOUCH_PAD0_REG + gpio_num * 4, RTC_IO_TOUCH_PAD0_DRV, mode);
}
static inline void ulp_riscv_gpio_pullup(gpio_num_t gpio_num)
{
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num*4, RTC_IO_TOUCH_PAD0_RUE);
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num * 4, RTC_IO_TOUCH_PAD0_RUE);
}
static inline void ulp_riscv_gpio_pullup_disable(gpio_num_t gpio_num)
{
CLEAR_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num*4, RTC_IO_TOUCH_PAD0_RUE);
CLEAR_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num * 4, RTC_IO_TOUCH_PAD0_RUE);
}
static inline void ulp_riscv_gpio_pulldown(gpio_num_t gpio_num)
{
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num*4, RTC_IO_TOUCH_PAD0_RDE);
SET_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num * 4, RTC_IO_TOUCH_PAD0_RDE);
}
static inline void ulp_riscv_gpio_pulldown_disable(gpio_num_t gpio_num)
{
CLEAR_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num*4, RTC_IO_TOUCH_PAD0_RDE);
CLEAR_PERI_REG_MASK(RTC_IO_TOUCH_PAD0_REG + gpio_num * 4, RTC_IO_TOUCH_PAD0_RDE);
}
/**

1
components/ulp/ulp_riscv/ulp_core/include/ulp_riscv_lock_ulp_core.h
Wyświetl plik

@ -11,7 +11,6 @@
extern "C" {
#endif
/**
* @brief Locks are based on the Peterson's algorithm, https://en.wikipedia.org/wiki/Peterson%27s_algorithm
*

3
components/ulp/ulp_riscv/ulp_core/include/ulp_riscv_print.h
Wyświetl plik

@ -13,7 +13,6 @@ extern "C" {
/* Underlying driver function for printing a char, e.g. over UART */
typedef void (*putc_fn_t)(const void *ctx, const char c);
/**
* @brief Installs a print driver that will be used for ulp_riscv_print calls
*
@ -22,7 +21,6 @@ typedef void (*putc_fn_t)(const void *ctx, const char c);
*/
void ulp_riscv_print_install(putc_fn_t putc, void *putc_ctx);
/**
* @brief Prints a null-terminated string
*
@ -30,7 +28,6 @@ void ulp_riscv_print_install(putc_fn_t putc, void *putc_ctx);
*/
void ulp_riscv_print_str(const char *str);
/**
* @brief Prints a hex number. Does not print 0x, only the digits
*

2
components/ulp/ulp_riscv/ulp_core/include/ulp_riscv_register_ops.h
Wyświetl plik

@ -17,7 +17,7 @@ extern "C" {
* When COCPU accesses the RTC memory, dont need to convert the access address.
*/
#define WRITE_RTC_MEM(addr, val) (*((volatile int*)(addr))) = (int) (val)
#define READ_RTC_MEM(addr) (*(volatile int*)(addr))
#define READ_RTC_MEM(addr) (*(volatile int*)(addr))
/*
* When COCPU accesses the RTC register, it needs to convert the access address.

1
components/ulp/ulp_riscv/ulp_core/include/ulp_riscv_touch_ulp_core.h
Wyświetl plik

@ -83,7 +83,6 @@ esp_err_t ulp_riscv_touch_pad_sleep_channel_read_benchmark(touch_pad_t touch_num
*/
esp_err_t ulp_riscv_touch_pad_sleep_channel_read_smooth(touch_pad_t touch_num, uint32_t *smooth_data);
/**
* @brief Reset benchmark of touch sensor sleep channel.
* @note Refer `touch_pad_sleep_channel_reset_benchmark()` for more details

1
components/ulp/ulp_riscv/ulp_core/include/ulp_riscv_uart_ulp_core.h
Wyświetl plik

@ -22,7 +22,6 @@ typedef struct {
gpio_num_t tx_pin; // TX pin number
} ulp_riscv_uart_t; // Context for the driver, initialized by ulp_riscv_uart_init
/**
* @brief Initialize the bit-banged UART driver
*

12
components/ulp/ulp_riscv/ulp_core/include/ulp_riscv_utils.h
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -67,7 +67,6 @@ void __attribute__((__noreturn__)) ulp_riscv_halt(void);
*/
void ulp_riscv_timer_stop(void);
/**
* @brief Resumes the ULP timer
*
@ -76,10 +75,9 @@ void ulp_riscv_timer_stop(void);
*/
void ulp_riscv_timer_resume(void);
#define ULP_RISCV_GET_CCOUNT() ({ int __ccount; \
asm volatile("rdcycle %0;" : "=r"(__ccount)); \
__ccount; })
#define ULP_RISCV_GET_CCOUNT() ({ int __ccount; \
asm volatile("rdcycle %0;" : "=r"(__ccount)); \
__ccount; })
#if CONFIG_IDF_TARGET_ESP32S2
/* These are only approximate default numbers, the default frequency
@ -99,7 +97,7 @@ void ulp_riscv_timer_resume(void);
void static inline ulp_riscv_delay_cycles(uint32_t cycles)
{
uint32_t start = ULP_RISCV_GET_CCOUNT();
/* Off with an estimate of cycles in this function to improve accuracy */
/* Off with an estimate of cycles in this function to improve accuracy */
uint32_t end = start + cycles - 20;
while (ULP_RISCV_GET_CCOUNT() < end) {

2
components/ulp/ulp_riscv/ulp_core/ulp_riscv_gpio.c
Wyświetl plik

@ -21,7 +21,7 @@ esp_err_t ulp_riscv_gpio_isr_register(gpio_num_t gpio_num, ulp_riscv_gpio_int_ty
}
/* Set the interrupt type */
REG_SET_FIELD(RTC_GPIO_PIN0_REG + 4*gpio_num, RTC_GPIO_PIN0_INT_TYPE, intr_type);
REG_SET_FIELD(RTC_GPIO_PIN0_REG + 4 * gpio_num, RTC_GPIO_PIN0_INT_TYPE, intr_type);
/* Set the interrupt handler */
return ulp_riscv_intr_alloc(ULP_RISCV_RTCIO0_INTR_SOURCE + gpio_num, handler, arg);

32
components/ulp/ulp_riscv/ulp_core/ulp_riscv_i2c.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -43,27 +43,27 @@
* |----------|----------|---------|---------|----------|------------|---------|
*/
static void ulp_riscv_i2c_format_cmd(uint32_t cmd_idx, uint8_t op_code, uint8_t ack_val,
uint8_t ack_expected, uint8_t ack_check_en, uint8_t byte_num)
uint8_t ack_expected, uint8_t ack_check_en, uint8_t byte_num)
{
uint32_t reg_addr = RTC_I2C_CMD0_REG + 4*cmd_idx;
uint32_t reg_addr = RTC_I2C_CMD0_REG + 4 * cmd_idx;
CLEAR_PERI_REG_MASK(reg_addr, 0xFFFFFFFF);
WRITE_PERI_REG(reg_addr,
(0 << 31) | // CMD Done
(0 << 31) | // CMD Done
((op_code & 0x3) << 11) | // Opcode
((op_code & 0x3) << 11) | // Opcode
((ack_val & 0x1) << 10) | // ACK bit sent by I2C controller during READ.
// Ignored during RSTART, STOP, END and WRITE cmds.
((ack_val & 0x1) << 10) | // ACK bit sent by I2C controller during READ.
// Ignored during RSTART, STOP, END and WRITE cmds.
((ack_expected & 0x1) << 9) | // ACK bit expected by I2C controller during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
((ack_expected & 0x1) << 9) | // ACK bit expected by I2C controller during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
((ack_check_en & 0x1) << 8) | // I2C controller verifies that the ACK bit sent by the slave device matches
// the ACK expected bit during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
((byte_num & 0xFF) << 0)); // Byte Num
((ack_check_en & 0x1) << 8) | // I2C controller verifies that the ACK bit sent by the slave device matches
// the ACK expected bit during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
((byte_num & 0xFF) << 0)); // Byte Num
}
static inline int32_t ulp_riscv_i2c_wait_for_interrupt(int32_t ticks_to_wait)
@ -76,9 +76,9 @@ static inline int32_t ulp_riscv_i2c_wait_for_interrupt(int32_t ticks_to_wait)
/* Return 0 if Tx or Rx data interrupt bits are set. */
if ((status & RTC_I2C_TX_DATA_INT_ST) ||
(status & RTC_I2C_RX_DATA_INT_ST)) {
(status & RTC_I2C_RX_DATA_INT_ST)) {
return 0;
/* In case of error status, break and return -1 */
/* In case of error status, break and return -1 */
#if CONFIG_IDF_TARGET_ESP32S2
} else if ((status & RTC_I2C_TIMEOUT_INT_ST) ||
#elif CONFIG_IDF_TARGET_ESP32S3
@ -176,7 +176,7 @@ void ulp_riscv_i2c_master_read_from_device(uint8_t *data_rd, size_t size)
for (i = 0; i < size; i++) {
/* Poll for RTC I2C Rx Data interrupt bit to be set */
if(!ulp_riscv_i2c_wait_for_interrupt(ULP_RISCV_I2C_RW_TIMEOUT)) {
if (!ulp_riscv_i2c_wait_for_interrupt(ULP_RISCV_I2C_RW_TIMEOUT)) {
/* Read the data
*
* Unfortunately, the RTC I2C has no fifo buffer to help us with reading and storing

8
components/ulp/ulp_riscv/ulp_core/ulp_riscv_print.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -25,7 +25,7 @@ void ulp_riscv_print_str(const char *str)
}
for (int i = 0; str[i] != 0; i++) {
s_print_ctx.putc(s_print_ctx.putc_ctx ,str[i]);
s_print_ctx.putc(s_print_ctx.putc_ctx, str[i]);
}
}
@ -42,9 +42,9 @@ void ulp_riscv_print_hex(int h)
for (x = 0; x < 8; x++) {
c = (h >> 28) & 0xf; // extract the leftmost byte
if (c < 10) {
s_print_ctx.putc(s_print_ctx.putc_ctx ,'0' + c);
s_print_ctx.putc(s_print_ctx.putc_ctx, '0' + c);
} else {
s_print_ctx.putc(s_print_ctx.putc_ctx ,'a' + c - 10);
s_print_ctx.putc(s_print_ctx.putc_ctx, 'a' + c - 10);
}
h <<= 4; // move the 2nd leftmost byte to the left, to be extracted next
}

4
components/ulp/ulp_riscv/ulp_core/ulp_riscv_uart.c
Wyświetl plik

@ -33,10 +33,10 @@ void ulp_riscv_uart_putc(const ulp_riscv_uart_t *uart, const char c)
{
ulp_riscv_gpio_output_level(uart->tx_pin, 0);
for (int i = 0; i<8; i++) {
for (int i = 0; i < 8; i++) {
/* Offset the delay to account for cycles spent setting the bit */
ulp_riscv_delay_cycles(uart->bit_duration_cycles - 100);
if ( (1 << i) & c) {
if ((1 << i) & c) {
ulp_riscv_gpio_output_level(uart->tx_pin, 1);
} else {
ulp_riscv_gpio_output_level(uart->tx_pin, 0);

4
components/ulp/ulp_riscv/ulp_core/ulp_riscv_utils.c
Wyświetl plik

@ -30,7 +30,7 @@ void ulp_riscv_halt(void)
/* Suspends the ulp operation and reset the ULP core. Must be the final operation before going to halt. */
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_DONE | RTC_CNTL_COCPU_SHUT_RESET_EN);
while(1);
while (1);
}
void ulp_riscv_timer_stop(void)
@ -55,7 +55,7 @@ void ulp_riscv_enable_sw_intr(intr_handler_t handler, void *arg)
/* Register interrupt handler */
if (handler) {
ulp_riscv_intr_alloc(ULP_RISCV_SW_INTR_SOURCE, handler, arg);
ulp_riscv_intr_alloc(ULP_RISCV_SW_INTR_SOURCE, handler, arg);
}
}

33
components/ulp/ulp_riscv/ulp_riscv.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2020-2022 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -78,18 +78,18 @@ static esp_err_t ulp_riscv_config_wakeup_source(ulp_riscv_wakeup_source_t wakeup
esp_err_t ret = ESP_OK;
switch (wakeup_source) {
case ULP_RISCV_WAKEUP_SOURCE_TIMER:
/* start ULP_TIMER */
CLEAR_PERI_REG_MASK(RTC_CNTL_ULP_CP_CTRL_REG, RTC_CNTL_ULP_CP_FORCE_START_TOP);
SET_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN);
break;
case ULP_RISCV_WAKEUP_SOURCE_TIMER:
/* start ULP_TIMER */
CLEAR_PERI_REG_MASK(RTC_CNTL_ULP_CP_CTRL_REG, RTC_CNTL_ULP_CP_FORCE_START_TOP);
SET_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN);
break;
case ULP_RISCV_WAKEUP_SOURCE_GPIO:
SET_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_GPIO_WAKEUP_ENA);
break;
case ULP_RISCV_WAKEUP_SOURCE_GPIO:
SET_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_GPIO_WAKEUP_ENA);
break;
default:
ret = ESP_ERR_INVALID_ARG;
default:
ret = ESP_ERR_INVALID_ARG;
}
return ret;
@ -99,13 +99,12 @@ esp_err_t ulp_riscv_config_and_run(ulp_riscv_cfg_t* cfg)
{
esp_err_t ret = ESP_OK;
#if CONFIG_IDF_TARGET_ESP32S2
/* Reset COCPU when power on. */
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SHUT_RESET_EN);
/* The coprocessor cpu trap signal doesnt have a stable reset value,
force ULP-RISC-V clock on to stop RTC_COCPU_TRAP_TRIG_EN from waking the CPU*/
/* The coprocessor cpu trap signal doesnt have a stable reset value,
force ULP-RISC-V clock on to stop RTC_COCPU_TRAP_TRIG_EN from waking the CPU*/
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_CLK_FO);
/* Disable ULP timer */
@ -124,11 +123,10 @@ esp_err_t ulp_riscv_config_and_run(ulp_riscv_cfg_t* cfg)
/* Reset COCPU when power on. */
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_SHUT_RESET_EN);
/* The coprocessor cpu trap signal doesnt have a stable reset value,
force ULP-RISC-V clock on to stop RTC_COCPU_TRAP_TRIG_EN from waking the CPU*/
/* The coprocessor cpu trap signal doesnt have a stable reset value,
force ULP-RISC-V clock on to stop RTC_COCPU_TRAP_TRIG_EN from waking the CPU*/
SET_PERI_REG_MASK(RTC_CNTL_COCPU_CTRL_REG, RTC_CNTL_COCPU_CLK_FO);
/* Disable ULP timer */
CLEAR_PERI_REG_MASK(RTC_CNTL_ULP_CP_TIMER_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN);
/* wait for at least 1 RTC_SLOW_CLK cycle */
@ -159,7 +157,6 @@ esp_err_t ulp_riscv_config_and_run(ulp_riscv_cfg_t* cfg)
esp_rom_delay_us(20);
REG_WRITE(RTC_CNTL_INT_CLR_REG, RTC_CNTL_COCPU_INT_CLR | RTC_CNTL_COCPU_TRAP_INT_CLR | RTC_CNTL_ULP_CP_INT_CLR);
#endif
return ret;

34
components/ulp/ulp_riscv/ulp_riscv_i2c.c
Wyświetl plik

@ -1,5 +1,5 @@
/*
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
@ -200,7 +200,7 @@ static esp_err_t i2c_set_timing(const ulp_riscv_i2c_cfg_t *cfg)
* |----------|----------|---------|---------|----------|------------|---------|
*/
static void ulp_riscv_i2c_format_cmd(uint32_t cmd_idx, uint8_t op_code, uint8_t ack_val,
uint8_t ack_expected, uint8_t ack_check_en, uint8_t byte_num)
uint8_t ack_expected, uint8_t ack_check_en, uint8_t byte_num)
{
#if CONFIG_IDF_TARGET_ESP32S2
/* Reset cmd register */
@ -210,12 +210,12 @@ static void ulp_riscv_i2c_format_cmd(uint32_t cmd_idx, uint8_t op_code, uint8_t
i2c_dev->command[cmd_idx].done = 0; // CMD Done
i2c_dev->command[cmd_idx].op_code = op_code; // Opcode
i2c_dev->command[cmd_idx].ack_val = ack_val; // ACK bit sent by I2C controller during READ.
// Ignored during RSTART, STOP, END and WRITE cmds.
// Ignored during RSTART, STOP, END and WRITE cmds.
i2c_dev->command[cmd_idx].ack_exp = ack_expected; // ACK bit expected by I2C controller during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
// Ignored during RSTART, STOP, END and READ cmds.
i2c_dev->command[cmd_idx].ack_en = ack_check_en; // I2C controller verifies that the ACK bit sent by the
// slave device matches the ACK expected bit during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
// slave device matches the ACK expected bit during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
HAL_FORCE_MODIFY_U32_REG_FIELD(i2c_dev->command[cmd_idx], byte_num, byte_num); // Byte Num
#elif CONFIG_IDF_TARGET_ESP32S3
@ -226,12 +226,12 @@ static void ulp_riscv_i2c_format_cmd(uint32_t cmd_idx, uint8_t op_code, uint8_t
i2c_dev->i2c_cmd[cmd_idx].i2c_command_done = 0; // CMD Done
i2c_dev->i2c_cmd[cmd_idx].i2c_op_code = op_code; // Opcode
i2c_dev->i2c_cmd[cmd_idx].i2c_ack_val = ack_val; // ACK bit sent by I2C controller during READ.
// Ignored during RSTART, STOP, END and WRITE cmds.
// Ignored during RSTART, STOP, END and WRITE cmds.
i2c_dev->i2c_cmd[cmd_idx].i2c_ack_exp = ack_expected; // ACK bit expected by I2C controller during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
// Ignored during RSTART, STOP, END and READ cmds.
i2c_dev->i2c_cmd[cmd_idx].i2c_ack_en = ack_check_en; // I2C controller verifies that the ACK bit sent by the
// slave device matches the ACK expected bit during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
// slave device matches the ACK expected bit during WRITE.
// Ignored during RSTART, STOP, END and READ cmds.
HAL_FORCE_MODIFY_U32_REG_FIELD(i2c_dev->i2c_cmd[cmd_idx], i2c_byte_num, byte_num); // Byte Num
#endif // CONFIG_IDF_TARGET_ESP32S2
}
@ -247,10 +247,10 @@ static inline esp_err_t ulp_riscv_i2c_wait_for_interrupt(int32_t ticks_to_wait)
/* Return ESP_OK if Tx or Rx data interrupt bits are set. */
if ((status & RTC_I2C_TX_DATA_INT_ST) ||
(status & RTC_I2C_RX_DATA_INT_ST)) {
(status & RTC_I2C_RX_DATA_INT_ST)) {
ret = ESP_OK;
break;
/* In case of error status, break and return ESP_FAIL */
/* In case of error status, break and return ESP_FAIL */
#if CONFIG_IDF_TARGET_ESP32S2
} else if ((status & RTC_I2C_TIMEOUT_INT_ST) ||
#elif CONFIG_IDF_TARGET_ESP32S3
@ -501,13 +501,13 @@ esp_err_t ulp_riscv_i2c_master_init(const ulp_riscv_i2c_cfg_t *cfg)
/* Enable RTC I2C interrupts */
SET_PERI_REG_MASK(RTC_I2C_INT_ENA_REG, RTC_I2C_RX_DATA_INT_ENA |
RTC_I2C_TX_DATA_INT_ENA |
RTC_I2C_ARBITRATION_LOST_INT_ENA |
RTC_I2C_ACK_ERR_INT_ENA |
RTC_I2C_TX_DATA_INT_ENA |
RTC_I2C_ARBITRATION_LOST_INT_ENA |
RTC_I2C_ACK_ERR_INT_ENA |
#if CONFIG_IDF_TARGET_ESP32S2
RTC_I2C_TIMEOUT_INT_ENA);
RTC_I2C_TIMEOUT_INT_ENA);
#elif CONFIG_IDF_TARGET_ESP32S3
RTC_I2C_TIME_OUT_INT_ENA);
RTC_I2C_TIME_OUT_INT_ENA);
#endif // CONFIG_IDF_TARGET_ESP32S2
return ESP_OK;

1
tools/ci/astyle-rules.yml
Wyświetl plik

@ -107,7 +107,6 @@ components_not_formatted_temporary:
- "/components/spiffs/"
- "/components/tcp_transport/"
- "/components/touch_element/"
- "/components/ulp/"
- "/components/unity/"
- "/components/vfs/"
- "/components/wear_levelling/"