mirror
/
N7DDC-ATU-100-mini-and-extended-boards
kopia lustrzana https://github.com/Dfinitski/N7DDC-ATU-100-mini-and-extended-boards
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Update README.md

master
David Fainitski 2019-05-12 15:14:39 -07:00 zatwierdzone przez GitHub
rodzic e3f61b4f92
commit a58ed71cf4
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
1 zmienionych plików z 8 dodań i 9 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

17
README.md
Wyświetl plik

@ -4,17 +4,16 @@
This sells was added: (for mini board, see the manual)
30 – sell for setting the time of glow dysplay or its backlite, in seconds .
The backlite is glowing whilw press any buttons and if RF power comes to input.П
## By default it is disabled, value 00.
By default it is disabled, value 00.
## 31 — cell for setting of an addidional indication mode,
## value 00 — for indicating L and C only.
## value 01 — for indicating the power delivered to the antenna and efficiency of fider and transmitter пwhen input power is enough for correct SWR meassuring.
## By default is enable, value 01.
31 — cell for setting of an addidional indication mode,
value 00 — for indicating L and C only.
value 01 — for indicating the power delivered to the antenna and efficiency of fider and transmitter пwhen input power is enough for correct SWR meassuring.
By default is enable, value 01.
Warning!!! The device does not take into account its own efficiency.
## Warning!!! The device does not take into account its own efficiency.
## 32 — cell for setting a feeder power loss ratio, the first number — integer part of decibell, second number — ten’s parts of decibell. Velue by default — 1.2 (12 writen in the cell). this value uses for counting the power delivered to antenna. The loss value can be found in the reference data for the used cable or you can measure the exact value yourself.
## If it is not necessary to take into account feeder losses, the value 00 should be written into the cell, then the calculations will correspond only to the mismatch losses.
32 — cell for setting a feeder power loss ratio, the first number — integer part of decibell, second number — ten’s parts of decibell. Velue by default — 1.2 (12 writen in the cell). this value uses for counting the power delivered to antenna. The loss value can be found in the reference data for the used cable or you can measure the exact value yourself.
If it is not necessary to take into account feeder losses, the value 00 should be written into the cell, then the calculations will correspond only to the mismatch losses.