mirror
/
N7DDC-ATU-100-mini-and-extended-boards
kopia lustrzana https://github.com/Dfinitski/N7DDC-ATU-100-mini-and-extended-boards
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Add files via upload

master
David Fainitski 2020-11-04 11:24:15 -08:00 zatwierdzone przez GitHub
rodzic fdcd2e5323
commit 010b404d1f
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
9 zmienionych plików z 22851 dodań i 0 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

146
ATU_100_EXT_board/FirmWare_PIC18F2520/2520_EXT_board_sources_V_3.1/2520.cfgsch 100644
Wyświetl plik

@ -0,0 +1,146 @@
<?xml version="1.0"?>
<MCU_DEVICE_FLAGS>
<DEVICE>
<DEVICE_NAME>P18F2520</DEVICE_NAME>
<DEVICE_CLOCK>16</DEVICE_CLOCK>
<SETTINGS>
<COUNT>34</COUNT>
<SETTING0>
<NAME>Oscillator Selection</NAME>
<DESCRIPTION>Internal oscillator block, port function on RA6 and RA7</DESCRIPTION>
</SETTING0>
<SETTING1>
<NAME>Fail-Safe Clock Monitor</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING1>
<SETTING2>
<NAME>Internal/External Oscillator Switchover</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING2>
<SETTING3>
<NAME>Power-up Timer</NAME>
<DESCRIPTION>Enabled</DESCRIPTION>
</SETTING3>
<SETTING4>
<NAME>Brown-out Reset</NAME>
<DESCRIPTION>Enabled</DESCRIPTION>
</SETTING4>
<SETTING5>
<NAME>Brown Out Reset Voltage</NAME>
<DESCRIPTION>Minimum setting</DESCRIPTION>
</SETTING5>
<SETTING6>
<NAME>Watchdog Timer</NAME>
<DESCRIPTION>Enabled</DESCRIPTION>
</SETTING6>
<SETTING7>
<NAME>Watchdog Timer Postscale</NAME>
<DESCRIPTION>1:256</DESCRIPTION>
</SETTING7>
<SETTING8>
<NAME>CCP2 MUX bit</NAME>
<DESCRIPTION>CCP2 input/output is multiplexed with RC1</DESCRIPTION>
</SETTING8>
<SETTING9>
<NAME>PORTB A/D</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING9>
<SETTING10>
<NAME>Low-Power Timer1 Oscillator</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING10>
<SETTING11>
<NAME>MCLR Pin</NAME>
<DESCRIPTION>Enabled</DESCRIPTION>
</SETTING11>
<SETTING12>
<NAME>Stack Full/Underflow Reset</NAME>
<DESCRIPTION>Enabled</DESCRIPTION>
</SETTING12>
<SETTING13>
<NAME>Low Voltage Program</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING13>
<SETTING14>
<NAME>Extended Instruction Set</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING14>
<SETTING15>
<NAME>Background Debug</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING15>
<SETTING16>
<NAME>Code Protection (Block 0)</NAME>
<DESCRIPTION>Block 0 (000800-001FFFh) is not code-protected</DESCRIPTION>
</SETTING16>
<SETTING17>
<NAME>Code Protection (Block 1)</NAME>
<DESCRIPTION>Block 1 (002000-003FFFh) is not code-protected</DESCRIPTION>
</SETTING17>
<SETTING18>
<NAME>Code Protection (Block 2)</NAME>
<DESCRIPTION>Block 2 (004000-005FFFh) is not code-protected</DESCRIPTION>
</SETTING18>
<SETTING19>
<NAME>Code Protection (Block 3)</NAME>
<DESCRIPTION>Block 3 (006000-007FFFh) is not code-protected</DESCRIPTION>
</SETTING19>
<SETTING20>
<NAME>Boot Block Code Protection</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING20>
<SETTING21>
<NAME>Data EEPROM Code Protection</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING21>
<SETTING22>
<NAME>Write Protection (Block 0)</NAME>
<DESCRIPTION>Block 0 (000800-001FFFh) or (001000-001FFFh) is not write-protected</DESCRIPTION>
</SETTING22>
<SETTING23>
<NAME>Write Protection (Block 1)</NAME>
<DESCRIPTION>Block 1 (002000-003FFFh) is not write-protected</DESCRIPTION>
</SETTING23>
<SETTING24>
<NAME>Write Protection (Block 2)</NAME>
<DESCRIPTION>Block 2 (004000-005FFFh) is not write-protected</DESCRIPTION>
</SETTING24>
<SETTING25>
<NAME>Write Protection (Block 3)</NAME>
<DESCRIPTION>Block 3 (006000-007FFFh) is not write-protected</DESCRIPTION>
</SETTING25>
<SETTING26>
<NAME>Configuration Register Write Protection</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING26>
<SETTING27>
<NAME>Boot Block Write Protection</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING27>
<SETTING28>
<NAME>Data EEPROM Write Protection</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING28>
<SETTING29>
<NAME>Table Read Protection (Block 0)</NAME>
<DESCRIPTION>Block 0 (000800-001FFFh) is not protected from table reads executed in other blocks</DESCRIPTION>
</SETTING29>
<SETTING30>
<NAME>Table Read Protection (Block 1)</NAME>
<DESCRIPTION>Block 1 (002000-003FFFh) is not protected from table reads executed in other blocks</DESCRIPTION>
</SETTING30>
<SETTING31>
<NAME>Table Read Protection (Block 2)</NAME>
<DESCRIPTION>Block 2 (004000-005FFFh) not protected from table reads executed in other blocks</DESCRIPTION>
</SETTING31>
<SETTING32>
<NAME>Table Read Protection bi (Block 3)</NAME>
<DESCRIPTION>Block 3 (006000-007FFFh) not protected from table reads executed in other blocks</DESCRIPTION>
</SETTING32>
<SETTING33>
<NAME>Boot Block Table Read Protection</NAME>
<DESCRIPTION>Disabled</DESCRIPTION>
</SETTING33>
</SETTINGS>
</DEVICE>
</MCU_DEVICE_FLAGS>

42
ATU_100_EXT_board/FirmWare_PIC18F2520/2520_EXT_board_sources_V_3.1/atu_100_fw_00.cfg 100644
Wyświetl plik

@ -0,0 +1,42 @@
<?xml version="1.0"?>
<MCU_DEVICE_FLAGS>
<DEVICE>
<DEVICE_NAME>P18F2520</DEVICE_NAME>
<VALUE>
<COUNT>11</COUNT>
<VALUE0>
<VAL>$300001:$0008</VAL>
</VALUE0>
<VALUE1>
<VAL>$300002:$001A</VAL>
</VALUE1>
<VALUE2>
<VAL>$300003:$0011</VAL>
</VALUE2>
<VALUE3>
<VAL>$300005:$0081</VAL>
</VALUE3>
<VALUE4>
<VAL>$300006:$0081</VAL>
</VALUE4>
<VALUE5>
<VAL>$300008:$000F</VAL>
</VALUE5>
<VALUE6>
<VAL>$300009:$00C0</VAL>
</VALUE6>
<VALUE7>
<VAL>$30000A:$000F</VAL>
</VALUE7>
<VALUE8>
<VAL>$30000B:$00E0</VAL>
</VALUE8>
<VALUE9>
<VAL>$30000C:$000F</VAL>
</VALUE9>
<VALUE10>
<VAL>$30000D:$0040</VAL>
</VALUE10>
</VALUE>
</DEVICE>
</MCU_DEVICE_FLAGS>

1290
ATU_100_EXT_board/FirmWare_PIC18F2520/2520_EXT_board_sources_V_3.1/atu_100_fw_00.dct 100644
Wyświetl plik

Plik diff jest za duży Load Diff

BIN
ATU_100_EXT_board/FirmWare_PIC18F2520/2520_EXT_board_sources_V_3.1/atu_100_fw_00.dlt 100644
Wyświetl plik

Plik binarny nie jest wyświetlany.

18
ATU_100_EXT_board/FirmWare_PIC18F2520/2520_EXT_board_sources_V_3.1/atu_100_fw_00.ihex 100644
Wyświetl plik

@ -0,0 +1,18 @@
:0200000400F00A
:100000004E01001513050001020007000700010062
:100010000050011002200450100022004500FFFF94
:100020000010002200470100022004701000FFFFB2
:100030000010000100FFFFFFFFFFFFFFFFFFFFFFBA
:10004000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC0
:10005000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0
:10006000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA0
:10007000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF90
:10008000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80
:10009000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF70
:1000A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF60
:1000B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50
:1000C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
:1000D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30
:1000E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20
:1000F000FFFFFFFFFFFFFFFFFFFFFFFFFF0100000C
:00000001FF

15
ATU_100_EXT_board/FirmWare_PIC18F2520/2520_EXT_board_sources_V_3.1/atu_100_fw_00.log 100644
Wyświetl plik

@ -0,0 +1,15 @@
0 1 mikroCPIC1618.exe -MSF -DBG -pP18F2520 -DL -O11111114 -fo16 -EH"E:\ATU-100\fw_EXT_3.1\2520_EXT_board_sources_V_3.1\atu_100_fw_00.ihex" -N"E:\ATU-100\fw_EXT_3.1\2520_EXT_board_sources_V_3.1\atu_100_fw_00.mcppi" -SP"D:\UserData\z00453wn\Documents\Mikroelektronika\mikroC PRO for PIC\Defs\" -SP"D:\UserData\z00453wn\Documents\Mikroelektronika\mikroC PRO for PIC\uses\P18\" -SP"E:\ATU-100\fw_EXT_3.1\2520_EXT_board_sources_V_3.1\" -IP"D:\UserData\z00453wn\Documents\Mikroelektronika\mikroC PRO for PIC\uses\P18\" "pic_init.c" "oled_control.c" "main.c" "__Lib_Math.mcl" "__Lib_MathDouble.mcl" "__Lib_System.mcl" "__Lib_Delays.mcl" "__Lib_Conversions.mcl" "__Lib_Button.mcl" "__Lib_ADC_A_D.mcl" "__Lib_EEPROM_256.mcl"
hint: 0 1139 Available RAM: 1515 [bytes], Available ROM: 32768 [bytes]
diagnostics: 0 122 Compilation Started pic_init.c
diagnostics: 31 123 Compiled Successfully pic_init.c
diagnostics: 0 122 Compilation Started oled_control.h
diagnostics: 407 123 Compiled Successfully oled_control.c
diagnostics: 0 122 Compilation Started oled_control.h
diagnostics: 851 123 Compiled Successfully main.c
diagnostics: 0 127 All files Compiled in 843 ms
hint: 0 1144 Used RAM (bytes): 832 (55%) Free RAM (bytes): 683 (45%) Used RAM (bytes): 832 (55%) Free RAM (bytes): 683 (45%)
hint: 0 1144 Used ROM (bytes): 25232 (77%) Free ROM (bytes): 7536 (23%) Used ROM (bytes): 25232 (77%) Free ROM (bytes): 7536 (23%)
diagnostics: 0 125 Project Linked Successfully atu_100_fw_00.mcppi
diagnostics: 0 128 Linked in 282 ms
diagnostics: 0 129 Project 'atu_100_fw_00.mcppi' completed: 1172 ms
diagnostics: 0 103 Finished successfully: 04 Nov 2020, 11:18:35 atu_100_fw_00.mcppi

17030
ATU_100_EXT_board/FirmWare_PIC18F2520/2520_EXT_board_sources_V_3.1/atu_100_fw_00.lst 100644
Wyświetl plik

Plik diff jest za duży Load Diff

68
ATU_100_EXT_board/FirmWare_PIC18F2520/2520_EXT_board_sources_V_3.1/atu_100_fw_00.mcppi 100644
Wyświetl plik

@ -0,0 +1,68 @@
[DEVICE]
Name=P18F2520
Clock=16000000
[MEMORY_MODEL]
Value=0
[BUILD_TYPE]
Value=0
[ACTIVE_TAB]
Value=main.h
[USE_EEPROM]
Value=1
[EEPROM_DEFINITION]
Value=
[USE_HEAP]
Value=0
[HEAP_SIZE]
Value=2000
[FILES]
File0=pic_init.c
File1=oled_control.c
File2=main.c
Count=3
[BINARIES]
Count=0
[IMAGES]
Count=0
ActiveImageIndex=-1
[OPENED_FILES]
File0=main.h
File1=oled_control.c
File2=oled_control.h
File3=main.c
File4=pic_init.c
File5=pic_init.h
Count=6
[EEPROM]
File0=atu_100_fw_00.ihex
Count=1
[ACTIVE_COMMENTS_FILES]
Count=0
[OTHER_FILES]
Count=0
[SEARCH_PATH]
Count=0
[HEADER_PATH]
Count=0
[HEADERS]
File0=main.h
File1=oled_control.h
File2=pic_init.h
Count=3
[PLDS]
Count=0
[Useses]
File0=ADC
File1=Conversions
File2=Button
File3=EEPROM
Count=4
[EXPANDED_NODES]
Count=0
[LIB_EXPANDED_NODES]
0=mikroE Libraries
1=System Libraries
57=C_Math
126=EEPROM
162=FLASH
Count=6

4242
ATU_100_EXT_board/FirmWare_PIC18F2520/2520_EXT_board_sources_V_3.1/atu_100_fw_00.mcppi_callertable.txt 100644
Wyświetl plik

Plik diff jest za duży Load Diff