### Added the ability to turn off the display backlight by timer and indication of the power delivered to the antenna and the ###transmitter efficiency.
### This sells was added: (for mini board, see the manual)
###
###32 – sell for setting the time of glow dysplay or his backlite, in seconds .
###The backlite is glowing whilw press any buttons and if RF power comes to input.П
###By default it is disabled, value 00.
###
###33 — cell for setting of an addidional indication mode,
###value 00 — for indicating L and C only.
###value 01 — for indicating the power delivered to the antenna and efficiency of fider and transmitter пwhen input power is enough for ###correct SWR meassuring.
###By default is enable, value 01.
###
### Warning!!! The device does not take into account its own efficiency.
###
### 34 — cell for setting a feeder power loss ratio, the first number — integer part of decibell, second number — ten’s parts of ###decibell. Velue by default — 1.2 (12 writen in the cell). this value uses for counting the power delivered to antenna. The loss value ###can be found in the reference data for the used cable or you can measure the exact value yourself.
### If it is not necessary to take into account feeder losses, the value 00 should be written into the cell, then the calculations ###will correspond only to the mismatch losses.