more Readme

Software/EQG2HBX-ESP32/ARM/Release/board.buildinfo

@@ -232,8 +232,8 @@ vm.runtime.compiler.allow_library_debugging=false
 serial.port.file=COM11
 serial.port=COM11
 serial.port.num=11
-extra.time.local=1551270354
-extra.time.utc=1551234354
+extra.time.local=1551271724
+extra.time.utc=1551235724
 extra.time.dst=36000
 extra.time.zone=-36000
 build.project_name=EQG2HBXE32.ino
@@ -268,7 +268,7 @@ vm.last.preproc.file.1.lineend=470
 vm.last.preproc.file.1.prefix_lines=0
 vm.last.preproc.file.2.file=EQGProtocol.h
 vm.last.preproc.file.2.offset=0
-vm.last.preproc.file.2.length=9758
+vm.last.preproc.file.2.length=9819
 vm.last.preproc.file.2.linecount=288
 vm.last.preproc.file.2.linestart=470
 vm.last.preproc.file.2.lineend=758

Software/README.md

@@ -2,35 +2,51 @@ THIS CODE IS NOT FULLY TESTED.
 ONLY USE IT IF YOU WANT TO HELP IN THE DEBUG PROCESS.  
 <hr />
 <h1>Installation</h1>
-<h2>EQMOD</h2>
+
 <hr />
 <ol>
-EQMOD does not support WiFi communications natively.  
-It needs a Serial<->WiFi bridge.  
-If you want to use EQMOD, you need to build the  
-<li> [EQMOD-WiFi](https://github.com/ozarchie/EQMOD-WiFi), or  
-<li> [EQMOD-BT](https://github.com/ozarchie/EQMOD-Bluetooth)  
-    interface and code.  
-</li>
-If you are OK with SynScan, see below.  
-<h2>ESP32</h2>
+
+<h2>ESP32 Interface</h2>
 <hr />
 <ol>
-<h3>Download the github image and configure</h3>
+<h3>Download the github EQMOD-ETX and configure</h3>
 <li>https://github.com/ozarchie/EQMOD-ETX/tree/master/Software</li>
 <li>Make sure you have the espressif ESP32 system and libraries installed.    
 [Download ESP32](https://github.com/espressif/arduino-esp32/blob/master/docs/arduino-ide/windows.md)</li>
-<li>Compile and upload to your hardware  
-<h3>Download and install Synscan (Windows/Android) to drive the scope</h3>  
-[Download SynScan](http://skywatcher.com/download/software/synscan-app/ "Title")  
-Download and install ASCOM driver for Synscan (Windows) to interface to CdC etc  
-[Download SynScan ASCOM](http://skywatcher.com/download/software/ascom-driver/ "Title")  
-</li>
-<li>Search and join WiFi network EQMODWiFi, Password is CShillit0</li>
+<li>Compile and upload to your hardware</li>  
+
+<ol>
+
+<h2>SYNSCAN</h2>
 <h3>Run on Windows - ASCOM only supports Windows</h3>
+<li>Download and install Synscan (Windows/Android) to control the telescope</li>  
+  
+[Download SynScan](http://skywatcher.com/download/software/synscan-app/ "Title")  
+<li>Download and install ASCOM driver for Synscan (Windows) to interface to CdC (or other ASCOM-based program)</li>  
+
+[Download SynScan ASCOM](http://skywatcher.com/download/software/ascom-driver/ "Title")  
+
+<li>Search and join WiFi network EQMODWiFi, Password is CShillit0</li>
+
 <li>Start SynScan and press Connect</li>
 <li>Select EQ6</li>
-<li>THEN Start CdC</li>
+<li>Start CdC</li>
 <li>Telescope>TelescopeSettings>Telescope: Check ASCOM</li>
 <li>Telescope>ConnectTelescope>Select:SynScanMobile Telescope</li>
 <li>Telescope>ConnectTelescope>Connect</li>  
+
+<h3>Run using phone or tablet App</h3>
+<li>Download and install Synscan (iOS/Android) to control the telescope</li>  
+  
+[Download SynScan](http://skywatcher.com/download/software/synscan-app/ "Title") 
+
+<h2>EQMOD</h2>
+EQMOD does not support WiFi communications natively.  
+
+It needs a Serial<->WiFi bridge.  
+
+If you want to use EQMOD, you need to build the  
+<li> [EQMOD-WiFi](https://github.com/ozarchie/EQMOD-WiFi)  
+ 
+    interface and code.  
+</li>