4.3 KiB
DSRemote
Operate your Rigol oscilloscope from your Linux desktop.
How to compile:
-
Install Git, make, the GCC compiler and the Qt4 development package:
Linux Mint 18: sudo apt-get install git-core make libqt4-dev libqt4-core g++
openSuse Leap 42.3: sudo zypper in git-core libqt4-devel
Fedora 25: sudo dnf install git-core qt-devel gcc-c++
Ubuntu 18.04: sudo apt-get install g++ make git-core qtbase5-dev-tools qtbase5-dev qt5-default -
Download the source code:
mkdir DSRemote_git
cd DSRemote_git
git init
git pull https://gitlab.com/Teuniz/DSRemote -
Create the makefile:
Linux Mint 18: qmake
openSuse Leap 42.3: qmake
Fedora 25: qmake-qt4
Ubuntu 18.04: qmake -
Compile the source code and install it:
make -j16
sudo make install
Now you can run the program by typing: dsremote
Read also the file readme_usbtcm_driver.txt and the file notes.txt.
Supported devices
DS6000 and DS1000Z series oscilloscopes.
MSO4000/DS4000 series
There is some basic support like capturing screenshots.
Not tested yet:
- Record & Playback function
- Wave Inspector
- serial decoding.
DS1000Z series:
DSRemote assumes that, on your DS1054Z, all options are installed. If that is not the case it's possible that the software does not work correctly. On your scope, go to the menu Utility -> Options -> Installed and make sure you have the following options installed:
- DECODER RS232,I2C,SPI Official
- MEM_DEPTH 24M/12M/6M Official
- TRIGGER Timeout,Runt,Window,Delay,Setup,NthEdge,RS232,I2C,SPI Official
- RECORDER Record/Re-play Official
- BANDWIDTH 100M Official
Qt framework:
In case you insist on using Qt5, the recommended way is not to use the Qt5 libraries that comes with your distro. Instead, download and compile the Qt5 source and use that to compile DSRemote. Here's a step by step list of instuctions:
First, fulfill the requirements for Qt:
http://doc.qt.io/qt-5/linux.html
Debian/Ubuntu: sudo apt-get install build-essential libgl1-mesa-dev libcups2-dev libx11-dev
Fedora: sudo dnf groupinstall "C Development Tools and Libraries" sudo dnf install mesa-libGL-devel cups-devel libx11-dev
openSUSE: sudo zypper install -t pattern devel_basis sudo zypper install xorg-x11-devel cups-devel freetype-devel fontconfig-devel
#############################################################################################
Compile a static version of the Qt5 libraries excluding all modules that are not needed.
This will not mess with your system libraries. The new compiled libraries will be stored
in a new and separate directory: /usr/local/Qt-5.9.4
It will not interfere with other Qt programs.
#############################################################################################
mkdir Qt5-source
cd Qt5-source
here is a list of download mirrors: https://download.qt.io/static/mirrorlist/ The Qt source package you are going to need is: qt-everywhere-opensource-src-5.9.4.tar.xz
tar -xvf qt-everywhere-opensource-src-5.9.4.tar.xz
cd qt-everywhere-opensource-src-5.9.4
./configure -v -release -opensource -confirm-license -c++std c++11 -static -accessibility -fontconfig -skip qtdeclarative -skip qtconnectivity -skip qtmultimedia -no-qml-debug -qt-zlib -no-mtdev -no-journald -qt-libpng -qt-libjpeg -system-freetype -qt-harfbuzz -no-openssl -no-libproxy -no-glib -nomake examples -nomake tests -no-compile-examples -cups -no-evdev -no-dbus -no-eglfs -qreal double -no-opengl -skip qtlocation -skip qtsensors -skip qtwayland -skip qtgamepad -skip qtserialbus
(takes about 1.5 minutes)
make -j8
(takes about 11 minutes)
sudo make install
Now go to the directory that contains the DSRemote sourcecode and enter the following commands:
/usr/local/Qt-5.9.4/bin/qmake
make -j8
sudo make install
Now you can run the program by typing: dsremote
Congratulations! You have compiled a static version of DSRemote that can be deployed on other systems without the need to install the Qt libraries. In order to reduce the size of the executable, run the following commands:
strip -s dsremote
upx dsremote