wfview/CHANGELOG

1355 wiersze
34 KiB
Plaintext

# CHANGELOG
- 20220824
Merge branch 'color'
updated to v1.41
- 20220819
version bumped to 1.4
temporary squashed logs; may redo later
audio fixes at exit
introduction of peak decays at the scope
resizing of top and bottom scope/waterfall
various fixes on the spectrum display
- 20220414
this is a cherrypicked CHANGELOG add as there are loads of changes due to different
audio transport ideas etc. For a full changelog exec: git log"
About box updated to include Patreon site
added 500 Hz step for VFO
Added clock and UTC toggle.
Added forced manual RTS setting
Add RIT function and other rigctl fixes
Adjusted window size for radios without spectrum. Thanks K5TUX.
Allow dynamic restarting of server
New Settings tab
Enable High DPI Scaling
More multi-radio support
many rigctl improvements/cmpat adds
N1MM+ TCP connection added
- 20211201
Another "minor" update for RX only rigs
Disable certain TX commands for RX only rigs
- 20211222
Add mutex within rigState to protect access
- 20211119
Add more version info
Add --version command line argument and WFVIEW_VERSION #define
- 20211118
A little less green in our gray.
Added size rules for audio source combo boxes.
Fix silly bug in retransmit code
Remove some extra logging from audio
- 20211115
Add mutex for incoming audio on udp and server
Force PA to use 48K Sample Rate if default is 44.1K
Try using slot for audio again
- 20211110
Server only tries mutex lock for 10ms before giving up.
Check number of samples in opus packet before attempting decode
- 20211109
Small changes to audio handler
- 20211107
Add SSE2 enhancements to resampler
Update audiohandler.h
Enable SSE or NEON enhancements for resampler
Fix resample ratio for input and output (hopefully!)
Create resampleRatio
Close PA stream after stopping it!
Fix Linux rtaudio build
Pulled out some debug code that isn't needed.
Fixed manual rig ID issue with uninitialized variable.
- 20211106
Added override allowing the user-specified CI-V address to also be used
as the Rig ID (model). This is useful for older radios that do not reply
to Rig ID queries. For radios using the default CI-V address, it should
"just work".
Added PTT "snooping" to the commHandler, such that radios needing RTS
set for PTT will work. Includes replying to PTT queries with the RTS
status. There is currently no UI to manually select radios that need
RTS.
deleted a lingering swapfile from one of my vim sessions
- 20211105
Added RTS PTT support commHandler and rigCommander. RTS is only sent
from rigCommander at this time, the pty is not parsed.
Added geometry constraints to the transceiver adjustments window, and
disable controls which do not function except for debug builds.
Changed IF/TPBF commands to be "unique priority" inserts. Added "more"
button for extended transceiver controls.
Added an IF Shift-like control for radios with Twin PBF.
Added support for IF Shift and Twin Pass-Band Filters. Currently
accessible only via the debug button.
- 20211104
Added IC-736 FM mode
Added code to force IC-736 to rigID
- 20211101
Use QT Audio by default
remove unneeded audio signal handler
Add portaudio support
Make switching between audio apis easier (and tidy .pro file)
Use buffered audio for Linux (was just Mac only)
Adjust buffer size depending on latency setting
- 20211031
Stuff audio buffer directly rather than signal/slot
- 20211022
Don't block until audio buffer has space
Bit of tidying
- 20211020
Tidy-up server shutdown
Trying to find cause of lockup when client disappears
- 20211006
Send TX/Freq changes multiple times with rigctld
bumped to 1.2d hopefully last testversion before 1.20
- 202109022
Remove duplicate setPriority()
Fix typo
Add keepalive for linux/mac pty
Fix alignment of rigname in taskbar
Only send RX antenna byte to rig when it has an RX antenna option in rigCaps
- 20210907
Make rigctld state work for USB connected rigs
- 20210831
added 25 kHz step for tuning
- 20210829
Experimental support for split mode in rigctld
Ignore control levels that we don't currently support
Add better detection of ci-v transceive disable
- 20210827
Add saving of meter2 state
- 20210823
Set audio thread priority in the correct place!
Now with dual meters for everyone!
- 20210820
Clear Center readout as well.
Fixed issue where the "none" selection didn't work quite right. Also
fixed the T/R meter switching to clear out invalid readings.
Set audio threads to be realtime priority
- 20210817
dual meter support/WHATSNEW
Current scale tic marks on both sides now!
More meter work, fixed some scales and added labels.
Better meter fonts
- 20210815
Fix for left over CIV client on server
Improve detection of unsupported codec.
- 20210814
Fix for Opus TX audio
txrate logging wrong
More warning removal!
More commenting in rigctld.h
Is this going to fix 8 bit audio?
Comment unused structs from rigctld
All audio codecs now work in both directions!
Update audiohandler.cpp
more 8bit fixes!
ulaw encoding test
8 bit encoding fix
Another issue with 8 bit audio
Try again to remove debugging!
Revert "Remove extra opus debugging" This reverts commit da53f5371bbeb35b10cbb831b83b74e1bdd771f9.
Remove extra opus debugging
Move opus init
Add some debugging for decoder
Use radio samplerate for opus
Remove big/little endian conversion
More Opus fixes
Update audiohandler.cpp
Try to fix Opus 2-channel
- 20210809
Add constants to make parsing (hopefully) easier
- 20210808
Fake known functions
Fix float warning
Remove calibration debugging
Add proper s-meter calibration
- 20210807
Add ritctl model to rigCaps
Fix to make wsjt-x work again!
Add split/duplex support
Update rigctld.cpp
Correct lack of parentheses in conditionals
Fix typo
Remove some debug logging
More rigctl features/fixes
- 20210806
Fix for get_powerstat
Update rigctld.cpp
Add some levels and other functions
Fix compile warnings
Add frequency ranges from rigcaps
- 20210806
Move rigctld settings in Ui
Fixes for setting freq/mode
Support for more rigctld commands
More fixes to rigctld
Change the way rigctl response is built
More rigctld fixes
- 20210804
Add rigctld config to ui and fix some bugs
- 20210802
added derSuessman prefix code
- 20210801
Fix broken 8bit audio
added derSuessmann additions to have a linux install prefix
Fedora build/install notes, see merge request eliggett/wfview!4
- 20210730
Added a little extra logic, also some cross-platform help, to the custom
stylesheet loader.
- 20210729
fix: set the style once
added /usr/local to search path for the stylesheet
- 20210726
Fixed error in IC-7410 attenuator spec.
- 20210726
Fix for blank username/password in server
- 20210724
small changes to INSTAll.md and addition of mint 20.2/openSUSE 15.3
- 20210720
Clear out meter values when type is switched.
Allow user to turn off power-down confirmation msgbox
- 20210719
wfview now uses the meter's own balistics (average and peak code). This
makes it very easy to meter any parameter 0-255. Meter Type "meterNone"
or other will display data in "raw" format.
- 20210718
Added center tuning for IC-R8600, partially moved meter balistics
(average and peak) to the meter class.
Quick debug for the metering queue, just in case.
20210717
Preliminary secondary meter support. See Settings tab for selection.
Some scales incomplete.
Added SWR and ALC scales to the meter.
Fix error in scale of power meter
- 20210716
Power meter for transmit. Much work remains on this meter alone.
Get antenna status on start-up and slow poll for it.
Add RX antenna selection for rigs that support it
- 20210714
Preferences added for Anti-Alias and Interpolate.
- 20210713
Added waterfall display options: anti-alias and interpolate. Not in
preferences yet. Debug button enables wf pan and zoom.
- 20210711
Allow user to select whether to confirm exit or not
- 20210709
Reset PTT timer for control-R keystroke.
Added a fix to keep the local frequency in-sync with any recent commands
sent to the radio.
Added more support for the IC-7600 in rigCaps.
Added time, date, and UTC offset commands. Currently initiated by the
debug button. There seems to be a bug in the 7300 where the UTC offset
has one hour subtracted, ie, -7 HRS becomes -8 HRS. The hex command
appears to be sent correctly.
- 20210708
Delete oldest entry from UDP buffer before adding new one.
If pty connected s/w sends a disable transceive command, dont' send any transceive commands to it
New about box!
- 20210706
Local af gain now has anti-log audio pot taper.
Only start audio when stream is ready
- 20210705
Added transceiver adjustment window show code, for the debug button only
currently.
Added window title text change to show radio model. Needs to be checked
cross-platform. On Linux Mint, displays: "IC-7300 -- wfview"
Applying setup.volume within audio handler if the audio handled is an
output. Added this to the init function.
waterfall theme is now saved.
Added local af gain and wf length to the preferences.
- 20210702
fixed small error where the tx latency was not copied in the UI
- 20210626
Merge branch 'sequence' of gitlab.com:eliggett/wfview into sequence
Duplicate of existing command.
Remove unnecessary escape sequence
Fix for fix of missing __PRETTY_FUNCTION__
Add __PRETTY_FUNCTION__ for compilers that don't have it.
- 20210625
Mode changes from the combo box now use the que. There are still other
methods to change mode which will transition shortly.
Faster PTT
Added PTT to the queue.
Added unique priority insertion methods.
Changed how commands with parameter data are added.
Initial queued "set" command commit. Only the frequency set command is
used so far, and only for the "Frequency" tab and the tuning knob.
- 20210624
Quick hack for WFM forcing FIL1 always
- 20210621
Added polling button
Moving to std::deque (double-ended que).
- 20210620
IC-R8600 span is now received into the UI correctly.
New unified outgoing command queue. Tested on IC-9700 and IC-718 (to
remote wfview server). CPU usage seems higher but please check your
system.
Timing seems to be acceptable but could probably use some tweaks.
S-meter polling is 25ms for fast radios, and slower rates for slower
radios. Half-duplex serial radios receive 3x slower polling to make room
for replies.
For Freq, Mode, etc "regular" constant polling (new feature):
IC-9700 polling is 5 per second, IC-718 is 1-2 per second.
Just helps keep the UI in sync with changes taking place at the rig. The
polling is slow enough that it doesn't impact anything. But quick enough
that it catches discrepancies pretty quickly.
- 20210619
Added a few more slider things
whatsnew: improved IC-R8600
- 20210618
Additional support for the IC-R8600, including wider scope spans.
Minor change to remove some old debug code that snuck in.
If no rig caps, then don't mess with the window!
Added full duplex comms parameter to rigCaps. We assume half-duplex
until we receive a reply to rigID.
Fixed accidental s-meter timing parameter change.
- 20210617
Radios without spectrum do not show spectrum, and, the window properly
resizes for those controls. Also, a new key command, control-shift-d has
been added to run debug functions from any tab in the program.
- 20210615
Additional code to hide/show spectrum and correcting an issue with the
rig name not populating for non-spectrum radios.
Dynamic show/hide spectrum for rigs without this feature.
Additional data corruption checking.
- 20210614
Changed collision detection code so that we can more easily see what
message was missed.
Added collision detection for serial commands. Collisions are apparently
frequent for true 1-wire CI-V radios.
We now calculate polling rates immediately upon receiveCommReady for
serial connections. For network connections, we assume sane values and
modify once we receive the baud rate from the server.
Add Neon (ARM) support to resampler
Revert to using resampler directory rather than opus-tools submodule
- 20210612
Add tooltip showing percentage of TX power when slider is moved
- 20210611
adding a second path/way for the qcustomplot link if the first fails
Update udpserver.cpp
Use global watchdog rather than per-connection
Report when users are disconnected by the watchdog
Use watchdog to cleanup lost server connections
Fix crash on disconnect
Make status update after disconnection
More server disconnection cleanup
Improve server disconnection/cleanup
- 20210610
remove spaces when adding extra server users
Update udpserver.cpp
Allow both encoded and plain text passwords
Lots of fixes to server setup table
Hopefully fix the occasional 0xe1 packet from hitting the pty
Add more info for server connections
Make sure that user is authenticated before allowing CIV/Audio
Use correct location for statusupdate!
Indicate when TX is not available
Show server connection status in taskbar (only for USB connected rigs)
- 20210609
Allow sender or receiver to be 0xe1 in server
Always forward wfview traffic to wfview clients
- 20210608
Truncate wfview.log on open
Detect radio baudrate in server mode
Comment out rtaudio if not being used
Baud rate calculations are now only happening when baud rate is received
and reasonable.
- 20210607
Check that we have at least 1 audio channel available.
Improve audio cleanup
Add extra debugging for UDP server CIV
Make only MacOS use buffered audio
Improve mac audio
- 20210606
Fix TX Audio on Linux
Various fixes to udpserver
Make QTMultimedia default
Fix to allow rtaudio to compile again
- 20210605
Add latency check to TX audio
Fix incorrect use of latency setting
- 20210604
Stop silly compile warning
Change udpserver to use new audiosetup struct properly.
Fix audio device selection
Fix for txaudio
Add QtMultimedia as default audio
- 20210603
Hopefully fix hang on exit when trying to close audio thread.
- 20210602
Use heap based rtaudio for enumeration
Catch possible exception when closing non-existent stream
Fix mac audio
Fix mac crash on closing audio
Make sure audio is deleted in destructor
Force specific rtaudio API depending on platform.
Linux now uses librtuadio-dev where available
Removing local rtaudio code and using library instead.
revert to ALSA for now
Tell rtaudio not to hog device
Update audiohandler.cpp
Select chunksize based on native sample rate
Force 48K sample rate when 44100 is detected.
change linux compiler directive to allow new-aligned
Tidy up server mutexes
Fix server high CPU on disconnect
- 20210601
Stop deleting audio after last client disconnects
Change udpserver packet handling to be similar to udphandler
Update udpserver.cpp
Let buffer keep filling.
Change to 10ms poll time for server rx audio
Mutex work in udpserver
Fix for crash when remote requests tone.
- 20210531
IC-7700 support
Open pty non-blocking
Fix for crashing pty on mac
Fix compile issue after merge
- 20210530
Keep the theme during resize. TODO: preference for wf theme
Removing my own uninformed sidenote.
Waterfal length may now be adjusted. Let's see what range of length
seems good and limit the control accordingly. Also there may be a memory
leak in the prepareWf() function where the colormap is created when the
image is resized.
CIV may now be changed as-needed while running.
Remove various compiler warnings and tidy up.
add silence if audio has stopped
- 20210529
fix for mac/linux compiler
Detect number of device channels and convert accordingly
Lots more changes for rtaudio compatibility
Small change to show default audio devices
- 20210528
More chair movements.
More arranging of the chairs. Also fixed a minor bug that prevented the
"Manual" serial device entry on my system.
Cleaning up the main constructor for wfmain.
Add some startup logging
Update audiohandler.cpp
Update udphandler.cpp
Change toolbar display formatting
Use preferred sample rate rather than force 48000
- 20210527
Allow higher latency
udpserver fixes
Update udpserver.cpp
Fix for tx audio channels
Add tx audio
add asound lib to linux build
fix qmake file
Use ring buffer with rtaudio to eliminate mutexes
- 20210525
Update INSTALL_PREBUILT_BINARY.md
move ulaw to dedicated header
add rtaudio as submodule
add opus-tools as submodule
Add mutex for audio buffer
- 20210523
Fixes for linux build
First working rtaudio (output only)
Link can now be clicked.
Added helpful text to settings tab.
Allow entry to Server Setup for either radio connection type.
Minor change to clarify roll of Server Setup
- 20210522
Add debugging and fix silly error in audiooutput combobox
re-enable audio buffers
Attempt to fix crash
Make only first client have TX audio
Stop audiohandler re-enumerating devices on connect.
Stop preamps/attenuators lists growing every time we reconnect.
Try increasing audio device buffer size
- 20210521
Changed method for adding modes to rigs and populating the rig menu.
This should be easier to maintain and better in the long run.
"Hopefully" fix annoying UDP server crash on client disconnect!
Fix for TX audio in udp server
Fix for stuttering audio on mac
Fixed missing break in switches.
Typo in message about CI-V
Dynamic timing update for all baud rates and connection types.
Fixed support for 9600 baud and lower speeds.
- 20210521
Add baud rate detection for remote rigs
Correct propCIVAddr to work if less than 0xe0
Change audiohandler to use latency for tx audio
- 20210520
Added IC-756 Pro. Tested UI and back-end response with 7300 and fake
RigID reply.
Added additional support for the IC-756 Pro III. Essentially untested.
Cleaned up warning and UI help text.
Add more features to rigstate
- 20210519
Model ID text format fixed. Shows IC-0x followed by the raw rig ID
received.
Fixed issue where unknown rigs were identified as 0xff. All rigs are now
identified using rigCaps.modelID, populated with the raw response from
the Rig ID query. Enumerations of known rig types continue to fall into
rigCaps.model, and unknown rigs will match to rigCaps.model=modelUnknown,
as before.
Serial baud rate is in the UI now. Added some enable/disable code to
prevent confusion about which options can be used with which types of
connections.
Better about box.
fixed filename in instructions
Add MacOS serial port entitlement
- 20210518
Remove unused variables
Make windows build include git version
Command line version of git must be available in the path.
Various file tidying for Windows/Mac builds
Flush buffers if too many lost packets.
remove duplicate audioPacket metatype
Fix silly error in udpserver audio
Allow receive only in udpHandler
Manual CIV is now read from the preferences and populates the UI
accordingly.
Changed UI a little, and added manual CI-V options. Seems to work well.
- 20210517
Fixes for MacOS build - sandbox
Fixes for mac logging/pty since adding sandbox
Make audio input buffer a qMap
Use qMap instead of qVector for buffers as they are auto-sorted.
- 20210516
Fixed attenuator on IC-7000
register audio metatype in wfmain with all of the others
Move manual serial port so linux/mac only
- 20210516 Added IC-7200 support. This has not been tested.
- 20210515 Change to correct bug when CI-V is user-specified and rigCaps were never
populated.
Making the s-meter error command easier to read.
Added IC-706 to rigCaps. Support for the IC-706 is currently broken but
development is in progress.
Added check for if the rig has spectrum during initial state queries.
BSR debug code.
Small fixes for rigctld
- 20210514 Make UDP port textboxes expanding.
Selecting an antenna now sets that antenna for TX and RX.
wfview now closes when the main window is closed.
Filter selection now checks for data mode.
Preliminary IC-7000 support. TODO: Input selection, modes, filters,
reported bug with frequency input and s-meter.
Moved the power buttons.
Cyan for the tuning line.
Resize UDP port text boxes (again!)
ake UDP port textboxes expanding.
Fixes to UDP server
Hopefully improve stability of pty by filtering traffic for any other CIV id.
- 20210513 Additional search path for macports compatibility (macOS only).
Slower polling for older rigs using lower serial baud.
Fix CI-V packet length bug in udphandler
Set pty serial port to NULL by default
- 20210512 Fix for crash on MacOS
- 20210511 Fixes for virtual serial port in Windows.
Initial commit of pty rewrite
There is a new combobox in Settings which shows the file that the pty device is mapped to.
You can select from ~/rig-pty[1-8] which should work if you have multiple instances of wfview.
- 20210509 Enhanced accessibility for the UI.
- 20210508 Data Mode now sends the currently selected filter.
Removed -march=native compiler and linker flags. This should make the
binary builds more compatible, and also eliminate an issue on Pop! OS,
where the default optimizations clashed.
Preliminary IC910H support
- 20210507 Added serial port iterators for the IC-7610 and IC-R8600. Untested.
removing debug info we didn't need.
Adding /dev/ to discovered serial devices, also ignoring case on "auto"
for serial port device.
wfview's own memory system now tracks mode correctly. *however*, it
needs work:
It should track the selected filter, since this information is generally
available and useful, and it should also be storing the frequencies in Hz.
I am also not sure how well the stored memory mode specification
will work across multiple rigs.
Added more mode shortcuts: A = airband, $ = 4 meter band (shift-4), W =
WFM, V = 2M, U = 70cm, Shift-S = 23cm (S-band)
Fixed BSR mode and filter selection.
The band stacking register now uses the newer integer frequency parsing.
We also communicate a little slower to the serial rigs, which seems more
reliable.
Updater serialDeviceListCombo with current COM/tty port setting
pttyHandler doesn't use pty parameter in Linux so set to Q_UNUSED to eliminate warning
- 20210506 Force DTR/RTS to false to stop rigs going into TX if USB Send is enabled
Convert project to 32bit default on Windows and remove beginnings of VSPE code.
- 20210505 Add code to select virtual serial port
fixed a typo in mint instructions and ubuntu instructions
- 20210504 fixed the display instead of rigcaps so that ant sel starts with 1 instead of 0
Fix to add a blank user line in server if no users are configured.
small changes where to find the release; removed the src/build target directory requirement as the release unpacks in ./dist
- 20310503 Fix for Built-in audio on MacOS
- 20210501 Fixed bug 007, which allowed negative frequencies to be dialed.
Double-clicking the waterfall now obeys the tuning step and rounding
option in the settings.
Unified frequency-type MHz to use same code as Hz.
Add WFM mode for IC705 and remove duplicate WFM mode for IC-R8600
make bandType start at 0 so it doesn't overflow rigCaps.bsr
Fix windows release build
Changed the organization and domain to wfview and wfview.org.
Added more modes for the IC-R8600.
- 20210430 Different timing on command polling for serial rigs.
- 20210427 Minor changes to hide sat button until we have time to work on that
feature.
Additional bands added, Airband, WFM
added 630/2200m for 705; probably like the 7300 hardly usable for TX though. Also added auomatic switching to the view pane after non-BSR bands are selected
added 630/2200m to 7300/7610/785x
derp: fixed main dial freq display for non-BSR 4m band; see also previous commit
fixed main dial freq display for non-BSR bands 60, 630, 2200m if such a band was selected in the band select menu
Minor change to set frequency, which was lacking "emit" at the start.
changed the modeSelectCombo-addItem sequence a bit to have modes grouped; CW and CW-R are now grouped, as well as RTTY/RTTY-R; AM and FM are grouped now
- 20210426 Well, that was fun. Color preferences now work, and colors can be
modified from the preference file for custom plot colors.
The preference file now stores colors as unsigned int. To convert the
colors in the file to standard AARRGGBB format (AA = Alpha channel), use
python's hex() function. Maybe one day we will fix the qt bug and make
this save in a better format.
Added dynamic band buttons. Fixed multiple bugs related to various
differences in band stacking register addresses (for example, the GEN
band on the 705 has a different address from the 7100 and the 7300).
This code was only tested with the 9700.
started rough docs for the usermanual
- 20210425 More work on rigctld
Faster polling. Clarified in comments around line 309 in wfmain.cpp.
Added ability to read RIT status. Added RIT to initial rig query. Added
Added ability to read RIT status. Added RIT to initial rig query. Added
variables to handle delayed command timing values. Fixed bug in
frequency parsing code that had existed for some time. Changed tic marks
on RIT knob because I wanted more of them. Bumped startup initial rig
state queries to 100ms. May consider faster queries on startup since we
are going to need more things queried on startup.
- 20210424 Receiver Incremental Tuning is in. The UI does not check the rig's
initial state yet, but the functions are partially in rigCommander for
that purpose.
- 20210423 Found two missing defaults in switch cases inside rigcommander.cpp.
Modified rig power management to stop command ques (s-meter and others).
Upon rig power up, the command queue is repurposed as a 3 second delay
for bootup, and then, commands are issued to restore the spectrum
display (if the wf checkbox was checked). I've made new functions,
powerRigOff and powerRigOn, for these purposes.
work in progress on spectrum enable after power off/on.
powerOff should work now.
- 20210420 rigctl working (sort of) with WSJT-X
- 20210419 Initial commit of rigctld (doesn't currently do anything useful!)
- 20210417 Adding a default position for the frequency indicator line.
Goodbye tracer
- 20210416 added support info for prebuild-systems
- 20210412 added airband, dPMR, lw/mw European and fast HF/70/23cm 1 MHz tuning steps
- 20210411 Added ATU feature on 7610.
Now grabs scope state on startup. Found bug, did not fix, in the
frequency parsing code. Worked around it by using doubles for now.
- 20210410 Preamp and attenuator are now queried on startup. Additionally, the
preamp is checked when the attenuator is changed, and the attenuator is
checked with the preamp is changed. This helps the user understand if
the rig allows only one or the other to be active (such as the IC-9700).
Added frequency line. Let's see how we like it.
Add some preliminary parts of getting the attenuator, preamp, and
antenna selection on startup. UI not updated yet but getting there.
- 20210409 Moved ATU controls to main tab.
Added waterfall theme combo box
Removed buttons from attenuator preamp UI controls.
Antenna selection might work, untested.
Preamp code is in. Can't read the current preamp state yet but we can
set it. Nicer names for preamp and attenuator menu items.
- 20210408 Preamp data is now tracked (but not used yet)
re-added lost tooptip for SQ slider
- 20210407 Minor disconnect in the getDTCS call
Attenuators are in! Please try them out!
- 20210406 The repeater setup now disables elements for things your rig doesn't do.
We now query the repeater-related things on startup, such that the
repeater UI is populated correctly.
We now have kHz as the assumed input format if there isn't a dot in the
entry box. Enjoy that!
Minor change so that we track the selected tone to mode changes, keeping
the radio in sync with the UI.
Tone, Tone Squelch, and D(T)CS seem to work as expected. Mode can be
selected.
- 20210405 removed 150 Hz CTCSS / NATO as it can't make that by itself
added 77.0 Hz tone to CTCSS
We can now read the repeater access mode and update the UI. What remains
is to be able to set the mode.
Working read/write of Tone, TSQL, and DTCS tones/code. Some code is also
present now to change the mode being used (tone, tsql, DTCS, or some
combo of the two).
- 20210404 Tone, TSQL, and DTCS code added, but not complete.
better tone mode names
Started work on the tone mode interface.
- 20210401 Added placeholders for attenuator, preamp, and antenna selection UI
controls.
Moved some repeater-related things out from rig commander and into a
shared header.
- 20210331 Adjusting signals and slots for repeater duplex.
Basic duplex code copied from wfmain to the new repeatersetup window.
- 20210330 Added conditional to debug on serial data write size.
- 20210329 Fix crash when radio is shutdown while wfview is connected.
- 20210311 Add local volume control for UDP connections.
add volume control to audiohandler
Small fixes to UDP server
Add USB audio handling to UDP server
Changed frequency parameters to (mostly) unsigned 64-bit ints. This
makes all the rounding code very simple and removes many annoying lines
of code designed to handle errors induced by using doubles for the
frequency.
- 20210310 audio resampling added / opus
updates on virtual serial port
fixed input combo boxes from growing
fixed 4:15 rollover/disconnect issue
- 20210304 Tuning steps! Still need to zero out those lower digits while scrolling
if box is checked.
Fix spectrum peaks as well.
Fix spectrum 'flattening' with strong signal
Add separate mutex for udp/buffers.
supported rigs IC705, IC7300 (over USB, no sound), IC7610, IC785x
- 20210227 changed the way udp audio traffic is handled
on both the TX and RX side.
- 20210226 Fixed minor bug where flock did not stop double-clicking on the
spectrum.
S-meter ballistics:
Turned up the speed. Once you see fast meters, there's no going back.
Tested at 5ms without any issues, committing at 10ms for now. Note that
50ms in the first 'fixed' meter code is the same as 25ms now due to how
the command queue is structured. So 10ms is only a bit faster than
before.
Fixed meter polling issue
- 20210224 fixed 785x lockup
Added scale and dampening/averaging to s-meter
- 20210222 f-lock works now
- 20210221 added working s-meter
added working power meter
added visual studio 2019 solution (windows builds)
changed packet handling, WIP
rigtype stays in view on status bar
added audio input gain slider
- 20210218
added SQ slider
added TX power slider
added TX button
added simplex/duplex/auto shifts
added debug logging
added TX and RX codec selections
added RX audio buffer size slider
started adding server setup
- 20210210 added control over LAN for rigs that support it
has been tested on the 705, 7610, 785x, 9700.
should work on 7700, 7800, other rigs.
added different sampling rates for rx
added different codecs
added scope data for 7610, 785x.
several cosmetic changes in the UI
fixed a slew of bugs
builds on MAC-OS, Linux, Windows
added ToFixed
implemented connect/disconnect rig
improved USB serial code
fixed memory leak
redesigned rx audio path for better performance
added round trip time for network connected devices
added detection code of rigtype
automatic detection of CIV control address
added logfile capability
works on a raspberry pi (USB and ethernet)