kopia lustrzana https://gitlab.com/eliggett/wfview
started rough docs for the usermanual
rodzic
7bfb30e9c6
commit
8cf7559d27
|
@ -0,0 +1,7 @@
|
|||
I started to describe in text what all the controls are and what they
|
||||
actually are supposed to do. This is a very rough start of UI documentation
|
||||
and will beautify that of course. Initially want just to be sure that the
|
||||
definitions are right and everyone can edit/push it. So feel free.
|
||||
|
||||
Note that the markers that certainly are incomplete are marked TODO.
|
||||
|
|
@ -0,0 +1,187 @@
|
|||
|
||||
|
||||
View:
|
||||
|
||||
|
||||
buttons
|
||||
|
||||
spectrum scope/waterfall:
|
||||
|
||||
spectrum mode
|
||||
|
||||
depending on the rig you can select:
|
||||
|
||||
center
|
||||
fixed
|
||||
scroll-center
|
||||
scroll-fixed
|
||||
|
||||
spectrum span
|
||||
|
||||
the spectrum span is active in center modes and you can select
|
||||
here the span you like, just as on the rig.
|
||||
|
||||
spectrum edge
|
||||
|
||||
here you can select the edge number as programmed in the rig.
|
||||
Most rigs will accept four edges.
|
||||
|
||||
|
||||
tofixed
|
||||
|
||||
clear peaks
|
||||
|
||||
here you can clear the peaks. Currently we only support persistent
|
||||
peaks and at some point we are changing that to be able to have it
|
||||
go away after 10 seconds, like the rig does.
|
||||
|
||||
enable/disable wf
|
||||
|
||||
on/off switch for the scope/waterfall
|
||||
|
||||
wf theme
|
||||
|
||||
Currently fixed selections how the scope and waterfall look like
|
||||
with colors. At som epoint we may add the ability to accept the
|
||||
RGB values like the rig does.
|
||||
|
||||
|
||||
|
||||
mode
|
||||
|
||||
|
||||
here you can select the mode used for tx and rx. To enable data mode there is
|
||||
a separate button to select.
|
||||
|
||||
|
||||
Data mode
|
||||
|
||||
switch the D mode on/off on the selected mode.
|
||||
|
||||
receive (and tx) filter
|
||||
|
||||
Select the predefined filter settings of the rig.
|
||||
Rigs also will change the TX width accordingly.
|
||||
|
||||
transmit/receive
|
||||
|
||||
this button alternates between TX and RX; Note that to
|
||||
enable TX, you need to do that first on the Settings tab
|
||||
|
||||
enable/disable atu
|
||||
|
||||
if your rig supports an internal ATU, you can enable
|
||||
disable it here. Note that we have not tested external
|
||||
ATU's yet. It may follow, it may not...
|
||||
|
||||
enable/disable rit
|
||||
|
||||
Enable the RIT function; currently no feedback on the rx shift.
|
||||
|
||||
tune
|
||||
|
||||
Button to initiate the ATU. Note that we have not tested external
|
||||
ATU's yet. It may follow, it may not...
|
||||
|
||||
|
||||
repeater setup (expand)
|
||||
|
||||
TODO
|
||||
|
||||
preamp
|
||||
|
||||
You can select the preamp mode(s). Some rigs can only accept
|
||||
preamp OR att.
|
||||
|
||||
attenuator
|
||||
|
||||
you can select the rig attenuator here. Some rigs can only accept
|
||||
preamp OR att.
|
||||
|
||||
|
||||
antenna selection
|
||||
|
||||
TODO
|
||||
|
||||
controls
|
||||
|
||||
main dial (there is no sub dial yet)
|
||||
|
||||
by turning the dial, or using mouse wheel or clicking on the scope
|
||||
you can change the current frequency. The step size is below the
|
||||
main dial and you can select most known stepsizes there.
|
||||
An Flock button will effectively lock the freq to prevent accidental
|
||||
mis clicking/rotating mouse actions.
|
||||
|
||||
|
||||
rit dial
|
||||
|
||||
the rit dial will effectively modify the offset in RX; useful on the VHF
|
||||
bands and up. Note that you need to switch on RIT for that
|
||||
You can use the mouse wheel to change the offset/shift.
|
||||
|
||||
rf gain
|
||||
|
||||
This slider controls the RF gain of the rig
|
||||
|
||||
af gain (defaults to 100%
|
||||
|
||||
This controls the AF Gain locally, defaults to 100% and does not
|
||||
increase/decrease the AF gain on the rig itself.
|
||||
(Else, a remotely controlled rig could make a lot of noise ;-))
|
||||
|
||||
sq
|
||||
|
||||
The squelch control
|
||||
|
||||
tx power
|
||||
|
||||
Control that sets the power in % with the same accuracy as the rig
|
||||
so if your rig is 50 Watt at 47%, this slider will too.
|
||||
|
||||
mic gain
|
||||
|
||||
The mic gain slider sets the modulation level on the rig.
|
||||
|
||||
scope reference level
|
||||
|
||||
The scope reference level can be set here and TODO because
|
||||
need to check if this follows per band or not.
|
||||
|
||||
|
||||
=============================
|
||||
|
||||
The Band tab:
|
||||
|
||||
The band tab reflects what bands the rig supports. It directly will
|
||||
switch the rig to that band and you will be switched back to the View tab
|
||||
|
||||
Note that currently there is no 60m, nor 4m there, as well as other
|
||||
odd bands like 630m, 2200m.
|
||||
|
||||
Band stacking gives you the opportunity to use the band stacking registers
|
||||
which is filled by the rig itself.
|
||||
|
||||
|
||||
|
||||
=============================
|
||||
Frequency
|
||||
|
||||
On this tab you can insert a free frequency in kHz.
|
||||
|
||||
examples:
|
||||
|
||||
7100 --> 7.1 kHz
|
||||
430. --> 430 MHz
|
||||
|
||||
e.g. the dot itself defines currently that you specify MHz.
|
||||
It will not accept anything beyond the dot. E.g. 430.125
|
||||
will end up doing nothing.
|
||||
|
||||
After entering, you will be switched back to the View tab.
|
||||
|
||||
STO/RCL: TODO
|
||||
|
||||
Settings
|
||||
|
||||
|
Ładowanie…
Reference in New Issue