kopia lustrzana https://github.com/projecthorus/wenet
66 wiersze
1.9 KiB
Bash
66 wiersze
1.9 KiB
Bash
# /usr/bin/env bash
|
|
#
|
|
# Helper script to start up the Wenet Docker image.
|
|
#
|
|
# This script is intended to be downloaded using wget or otherwise,
|
|
# and modified prior to use.
|
|
#
|
|
|
|
# Your station callsign, which will be shown on https://ssdv.habhub.org
|
|
# when receiving packets.
|
|
# Make sure there is no space between the = and your callsign.
|
|
MYCALL=CHANGEME
|
|
|
|
# Receive Frequency (Hz)
|
|
# The normal receive frequency used by Project Horus is 443.5 MHz
|
|
RXFREQ=443500000
|
|
|
|
# RTLSDR Device ID. Leave this at 0 if you don't want to use a particular device
|
|
DEVICE=0
|
|
|
|
# Receiver Gain. Set this to 0 to use automatic gain control, otherwise if running a
|
|
# preamplifier, you may want to experiment with lower gain settings to optimize
|
|
# your receiver setup.
|
|
# You can find what gain range is valid for your RTLSDR by running: rtl_test
|
|
# A very rough figure that may work if you are running a preamp with ~20 dB gain is
|
|
# 32.8 - your performance may vary!
|
|
GAIN=0
|
|
|
|
# Bias Tee Enable (1) or Disable (0)
|
|
# Enable this is you are intending on powering a preamplifer via coax from your RTLSDR
|
|
BIAS=0
|
|
|
|
|
|
# Baud Rate & FSK Demod Oversampling Settings
|
|
#
|
|
# Default: 115177 baud 8x oversampling (Default using a RPi Zero W's UART)
|
|
# Other parameters which *may* work, but are un-tested:
|
|
# 9600 baud, 100x oversampling
|
|
# 4800 baud, 200x oversampling
|
|
#
|
|
BAUD_RATE=115177
|
|
OVERSAMPLING=8
|
|
|
|
|
|
# Stop and remove any existing wenet instances
|
|
echo "Stopping/Removing any existing Wenet instances..."
|
|
docker stop wenet || true && docker rm wenet || true
|
|
|
|
# Start the container!
|
|
echo "Starting new Wenet instance..."
|
|
docker run -d \
|
|
--name wenet \
|
|
-e MYCALL=$MYCALL \
|
|
-e RXFREQ=$RXFREQ \
|
|
-e GAIN=$GAIN \
|
|
-e BIAS=$BIAS \
|
|
-e BAUD_RATE=$BAUD_RATE \
|
|
-e OVERSAMPLING=$OVERSAMPLING \
|
|
-e DEVICE=$DEVICE \
|
|
-v ~/wenet/rx_images/:/opt/wenet/rx_images/ \
|
|
--device /dev/bus/usb \
|
|
-p 5003:5003 \
|
|
ghcr.io/projecthorus/wenet:latest
|
|
|
|
echo "Navigate to http://localhost:5003/ in your web browser to see the Wenet interface!"
|