mirror
/
vk3cpu
kopia lustrzana https://github.com/miguelvaca/vk3cpu
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność

Rename loop to coil in notes.

pull/2/head
miguel 2021-09-04 15:27:01 +10:00
rodzic aa3eadeaae
commit 626f6fb74c
3 zmienionych plików z 11 dodań i 11 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

6
inductor.html
Wyświetl plik

@ -42,7 +42,7 @@
<u>Inputs via the slider widgets:</u>
<ul>
<li>&#8960;a : Conductor diameter in millimeters (mm). Estimated equivalent AWG & SWG wire sizes are also displayed when appropriate.</li>
<li>&#8960;b : Loop diameter in millimeters (mm).</li>
<li>&#8960;b : Coil diameter in millimeters (mm).</li>
<li>c/a : 'c' is the inter-winding spacing, and 'a' is the conductor diameter, so 'c/a' is the spacing ratio. (Must be >= 1.1)
A low-value will increase the resistance due to the proximity effect.</li>
<li>N : Number of turns or windings.</li>
@ -53,8 +53,8 @@
relative to the coil length is representative. </p>
<u>Calculated dimensions:</u>
<ul>
<li>&#8960;o : Outer loop diameter (mm) </li>
<li>&#8960;i : Inner loop diameter (mm) - corresponds to the diameter of the winding former.</li>
<li>&#8960;o : Outer coil diameter (mm) </li>
<li>&#8960;i : Inner coil diameter (mm) - corresponds to the diameter of the winding former.</li>
<li>c : Distance between windings, measured from the conductor centers (mm).</li>
<li>&#8467; : Length of the coil (mm). Equal to c x N.</li>
</ul>

8
inductor_lrg.html
Wyświetl plik

@ -44,19 +44,19 @@
<u>Inputs via the slider widgets:</u>
<ul>
<li>&#8960;a : Outer conductor diameter in millimeters (mm). Equivalent coax cable size is also displayed.</li>
<li>&#8960;b : Loop diameter in millimeters (mm).</li>
<li>&#8960;b : Coil diameter in millimeters (mm).</li>
<li>c/a : 'c' is the inter-winding spacing, and 'a' is the conductor diameter, so 'c/a' is the spacing ratio. (Must be >= 1.1)
A low-value will increase the resistance due to the proximity effect.</li>
<li>N : Number of turns or windings.</li>
<li>f : The frequency of interest (MHz) for some of the calculations.</li>
<li>f : The frequency of interest (MHz) for some of the calculations. Frequency dependent results are shown on the top-right.</li>
</ul>
<p>Characteristics on the left are independent of frequency, while the characteristics on the right are dependent on the selected frequency. <br><br>
Each of the graphic representations attempt to keep the relative geometry correct, without exceeding the drawing boundary. The coil diameter
relative to the conductor diameter are representative. </p>
<u>Calculated dimensions:</u>
<ul>
<li>&#8960;o : Outer loop diameter (mm) </li>
<li>&#8960;i : Inner loop diameter (mm) - corresponds to the diameter of the winding former.</li>
<li>&#8960;o : Outer coil diameter (mm) </li>
<li>&#8960;i : Inner coil diameter (mm) - corresponds to the diameter of the winding former.</li>
<li>c : Distance between windings, measured from the conductor centers (mm).</li>
<li>&#8467; : Length of the coil (mm). Equal to c x N.</li>
</ul>

8
inductor_swg.html
Wyświetl plik

@ -42,19 +42,19 @@
<u>Inputs via the slider widgets:</u>
<ul>
<li>&#8960;a : Conductor diameter slider changes SWG from 0-50. Actual diameter displayed in decimal inches.</li>
<li>&#8960;b : Loop diameter in decimal inches (inches).</li>
<li>&#8960;b : Coil diameter in decimal inches.</li>
<li>c/a : 'c' is the winding-to-winding distance, measured from the conductor mid-points. The 'a' is the conductor diameter, so 'c/a' is the spacing ratio. (c/a >= 1.1)
A low-value will increase the resistance due to the proximity effect.</li>
<li>N : Number of turns or windings.</li>
<li>f : The frequency of interest (MHz) for some of the calculations.</li>
<li>f : The frequency of interest (MHz) for some of the calculations. Frequency dependent results are shown on the top-right.</li>
</ul>
<p>Characteristics on the left are independent of frequency, while the characteristics on the right are dependent on the selected frequency. <br><br>
Each of the graphic representations attempt to keep the relative geometry correct, without exceeding the drawing boundary. The coil diameter
relative to the conductor diameter are representative. </p>
<u>Calculated dimensions:</u>
<ul>
<li>&#8960;o : Outer loop diameter (inches) </li>
<li>&#8960;i : Inner loop diameter (inches) - corresponds to the diameter of the winding former.</li>
<li>&#8960;o : Outer coil diameter (inches) </li>
<li>&#8960;i : Inner coil diameter (inches) - corresponds to the diameter of the winding former.</li>
<li>c : Distance between windings, measured from the conductor centers (inches).</li>
<li>&#8467; : Length of the coil (inches). Equal to c x N.</li>
</ul>