Added keyer v5 (thx Uli, DL2DBG).

QCX-SSB.ino

@@ -4,12 +4,13 @@
 //
 //  Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 
-#define VERSION   "1.02j"
+#define VERSION   "1.02j2"
 
 #define QCX     1         // If you DO NOT have a QCX then comment-out (add two-slashes // in the beginning of this line)
 
 //dl2dbg 26.07.2020
 //dl2dbg 27.07.2020
+//dl2dbg 27.07.2020 //   Line -> reenabele Line :-( digitalWrite(RX, !(att == 2)); // RX (enable RX when attenuator not on)
 
 #define OLED  1     //dl2dbg  SDD1306 connection on display header: 1=GND(black), 2=5V(red), 13=SDA(brown), 14=SCK(orange)
 #define KEYER_DEF  //dl2dbg //Keyer_def und DEBUG can not akive at the same Time Less Codespace
@@ -2525,9 +2526,9 @@ void switch_rxtx(uint8_t tx_enable){
       //TCCR1A |= (1 << COM1A1);  // enable SIDETONE
       TCCR1A &= ~(1 << COM1B1); digitalWrite(KEY_OUT, LOW); // disable KEY_OUT PWM, prevents interference during RX
       OCR1BL = 0; // make sure PWM (KEY_OUT) is set to 0%
-     // digitalWrite(RX, !(att == 2)); // RX (enable RX when attenuator not on)
+      digitalWrite(RX, !(att == 2)); // RX (enable RX when attenuator not on)
 #ifdef NTX
-     // digitalWrite(NTX, HIGH);  // RX (disable TX)
+     digitalWrite(NTX, HIGH);  // RX (disable TX)
 #endif
       si5351.SendRegister(SI_CLK_OE, 0b11111100); // CLK2_EN=0, CLK1_EN,CLK0_EN=1
       lcd.setCursor(15, 1); lcd.print((vox) ? "V" : "R");