usdx-kamocat/ChibiOS/demos/ADUCM/RT-ADUCM360-ADICUP360

*****************************************************************************

** ChibiOS/RT port for ARM-Cortex-M3 ADICUP360.                            **

*****************************************************************************



** TARGET **



The demo runs on an ADICUP360 board.



** The Demo **



The demo flashes the two on-board LEDs using a thread, by pressing the button 

located on the board (BOOT) the test procedure is activated with output on the 

serial port SD0 (UART0, mapped on the User COM port).



** Board setup **



To redirect P0.6 and P0.7 to the User COM port it is required to setup

the switch matrix as:

 - S1 -> Don't Care

 - S2 -> 0

 - S3 -> Don't Care

 - S4 -> 0

   

** Build Procedure **



The demo has been tested by using the free Codesourcery GCC-based toolchain

and YAGARTO.

Just modify the TRGT line in the makefile in order to use different GCC ports.



** Notes **



Some files used by the demo are not part of ChibiOS/RT but are copyright of

Analog Devices and are licensed under a different license.

Also note that not all the files present within the Analog Devices 

Cross Core Embedded Studio are distributed with ChibiOS/RT, 

you can find the whole library on the ADI web site:



                             http://www.analog.com