diff --git a/README.md b/README.md
index 84c98a7..c424ed9 100644
--- a/README.md
+++ b/README.md
@@ -1,9 +1,9 @@
 # uWFG-Pico
-Inspired by a description of an [Arbitrary Waveform Generator](https://www.instructables.com/Arbitrary-Wave-Generator-With-the-Raspberry-Pi-Pic/) I decided to try this myself. The [uSDR-Pico](https://github.com/ArjanteMarvelde/uSDR-pico) project focused on getting to know the Pico, especially the multi-core feature, this project will focus on using PIO and DMA. 
+Inspired by a description of an [Arbitrary Waveform Generator](https://www.instructables.com/Arbitrary-Wave-Generator-With-the-Raspberry-Pi-Pic/) I decided to try something similar myself. The [uSDR-Pico](https://github.com/ArjanteMarvelde/uSDR-pico) project focused on getting to know the Pico, especially the multi-core feature, this project will focus on using PIO and DMA. 
 
 ![Prototype](doc/Proto.jpg) 
 
-The prototype provides two channels with 8 bit resolution, on which waveforms (sample files) can be played independently. The maximum sample frequency is the system clock, so on a Pico this is by default 125MHz. This obviously sets a limit to the maximum waveform frequency, in the sense that it will be a tradeoff with desired accuracy. If a sample file defining a single wave has a length of 25 samples, the maximum frequency is 125/25 = 5MHz. 
+The prototype provides two channels with 8 bit resolution, on which waveforms (sample files) can be played independently. The maximum sample frequency is the system clock, so on a Pico this is by default 125MHz. This obviously sets a limit to the maximum waveform frequency, in the sense that it will be a tradeoff with desired accuracy. If a sample file defining a single wave has a length of 25 samples, the maximum *wave* frequency is 125/25 = 5MHz. The sample clock can also be lowered, so for a minimum frequency both file length and clock divider must be tuned.
 
 Still, the performance is quite remarkable, and mostly limited by the implementation of the R-2R ladder network on the digital output. Stray capacitance together with the used resistor values and maybe some inductance will act as a low-pass filter, in case of the prototype maxing output to about 10MHz.