/*
 * dsp.c
 *
 * Created: Mar 2021
 * Author: Arjan
 * 
 * Signal processing of RX and TX branch
 * Each branch has a dedicated timer routine that runs on set times.
 * The callback period is set with RX_US and TX_US, e.g. 16 means every 16 usec, or 62.5 kHz.
 *
 * The RX branch:
 * - Sample I and Q QSD channels intermittently, and shift into I and Q delay line (31.25 kHz per channel)
 * - Low pass filter: Fc=4kHz
 * - Interpolate last two I samples to correct sampling phase difference with Q
 * - Quarter rate (7.8125 kHz) to improve low F behavior of Hilbert transform
 * - Calculate 15 tap Hilbert transform on Q
 * - Demodulate, SSB: Q - I, taking proper delays into account
 * - Push to Audio output DAC
 *
 * The TX branch:
 * - Sample the Audio input channel (62.5 kHz)
 * - Low pass filter: Fc=4kHz
 * - Eight rate (7.8125 kHz) to improve low F behavior of Hilbert transform
 * - Generate Q samples by doing a Hilbert transform
 * - Push I and Q to QSE output DACs
 *
 */

#include "pico/stdlib.h"
#include "hardware/pwm.h"
#include "hardware/adc.h"

#include "dsp.h"

/* Test sine waves 1, 2 and 4 kHz (@ 62.5kS/s rate) *
uint16_t wave1[64] = 
{
500,549,597,645,691,735,777,817,853,886,915,940,961,978,990,997,999,997,990,978,961,940,915,886,853,817,777,735,691,645,597,549,
500,450,402,354,308,264,222,182,146,113,84,59,38,21,9,2,0,2,9,21,38,59,84,113,146,182,222,264,308,354,402,450
};
uint16_t wave2[64] = 
{
500,597,691,777,853,915,961,990,999,990,961,915,853,777,691,597,500,402,308,222,146,84,38,9,0,9,38,84,146,222,308,402,
500,597,691,777,853,915,961,990,999,990,961,915,853,777,691,597,500,402,308,222,146,84,38,9,0,9,38,84,146,222,308,402
};
uint16_t wave4[64] = 
{
500,691,853,961,999,961,853,691,500,308,146,38,0,38,146,308,500,691,853,961,999,961,853,691,500,308,146,38,0,38,146,308,
500,691,853,961,999,961,853,691,500,308,146,38,0,38,146,308,500,691,853,961,999,961,853,691,500,308,146,38,0,38,146,308
};
*/

/* 
 * DAC_RANGE defines PWM cycle, determining DAC resolution and PWM frequency.
 * DAC resolution = Vcc / DAC_RANGE
 * PWM frequency = Fsys / DAC_RANGE
 * A value of 500 means 125MHz/500=250kHz [or 250 and 500kHz]
 * ADC is 12 bit, so resolution is by definition 4096
 */
#define DAC_RANGE	250
#define ADC_RANGE	4096

/* 
 * Callback timeout, determines frequency of TX and RX loops
 * Exact time is obtained by passing the value negative.
 * Here we use 16us (62.5 kHz == PWM freq/4 [or 8]) 
 */
#define RX_US		16
#define TX_US		16

/* 
 * Low pass filters Fc=3, 7 and 15 kHz (see http://t-filter.engineerjs.com/)
 * for sample rates 62.500 , 31.250 or 15.625 kHz , stopband appr -40dB
 * 8 bit precision, so divide sum by 256 
 */
int16_t lpf3_62[15] =  {  3,  3,  5,  7,  9, 10, 11, 11, 11, 10,  9,  7,  5,  3,  3};	// Pass: 0-3000, Stop: 6000-31250
int16_t lpf3_31[15] =  { -2, -3, -3,  1, 10, 21, 31, 35, 31, 21, 10,  1, -3, -3, -2};	// Pass: 0-3000, Stop: 6000-15625
int16_t lpf3_15[15] =  {  3,  4, -3,-14,-15,  6, 38, 53, 38,  6,-15,-14, -3,  4,  3};	// Pass: 0-3000, Stop: 4500-7812
int16_t lpf7_62[15] =  { -2, -1,  1,  7, 16, 26, 33, 36, 33, 26, 16,  7,  1, -1, -2};	// Pass: 0-7000, Stop: 10000-31250
int16_t lpf7_31[15] =  { -1,  4,  9,  2,-12, -2, 40, 66, 40, -2,-12,  2,  9,  4, -1};	// Pass: 0-7000, Stop: 10000-15625
int16_t lpf15_62[15] = { -1,  3, 12,  6,-12, -4, 40, 69, 40, -4,-12,  6, 12,  3, -1};	// Pass: 0-15000, Stop: 20000-31250

volatile uint16_t dac_iq, dac_audio;
volatile bool tx_enabled;


/* RX TIMER and callback */
volatile int16_t i_s[15], q_s[15], i_dc, q_dc, i_prev;
struct repeating_timer rx_timer;
bool rx_callback(struct repeating_timer *t) 
{
	static bool q_phase;
	int16_t sample;
	int32_t accu;
	int16_t qh;
	int i;
	
	if (tx_enabled) return(true);					// Early bailout when TX-ing
	
	if (q_phase)
	{
		adc_select_input(1);						// Q channel ADC 
		sample = (int16_t)adc_read() - ADC_RANGE/2;
		
		/* 
		 * Shift Q samples 
		 */
		for (i=0; i<14; i++) 
			q_s[i] = q_s[i+1];						// Q samples delay line
		
		/*
		 * Remove DC and store new sample
		 *  w(t) = x(t) + a*w(t-1) (use a=7/8, ca 0.87)
		 *  y(t) = w(t) - w(t-1) 
		 */
//		sample += (((q_dc<<3)-q_dc)>>3);			// Use sample as temporary q_dc
//		q_s[14] = sample - q_dc;					// Calculate output
//		q_dc = sample;								// Store new q_dc
		q_s[14] = sample;
		q_phase = false;							// Next: I branch
	}
	else
	{
		adc_select_input(0);						// I channel ADC 
		sample = (int16_t)adc_read() - ADC_RANGE/2;
		
		/* 
		 * Shift I samples
		 */
		for (i=0; i<14; i++) 
			i_s[i] = i_s[i+1];						// I samples delay line
		
		/*
		 * Remove DC and store new sample: average last two to get in phase with Q
		 *  w(t) = x(t) + a*w(t-1) (use a=7/8, ca 0.87)
		 *  y(t) = w(t) - w(t-1) 
		 */
//		sample += (((i_dc<<3)-i_dc)>>3);			// Use sample as temporary i_dc
//		i_s[14] = sample - i_dc;					// Calculate output
//		i_dc = sample;								// Store new i_dc
//		sample = i_s[14];							// Get out uncorrected sample
		i_s[14] = (sample + i_prev)/2;				// Correct phase difference with Q channel
		i_prev = sample;							// Remember last sample for next I-phase

		/* 
		 * Hilbert transform: A0 = 2/128, A2 = 8/128, A4 = 21/128, A6 = 79/128
		 */	
//		qh = (q_s[0]-q_s[14])/64 +
//			 (q_s[2]-q_s[12])/16 +
//			 (q_s[4]-q_s[10])/8 + (q_s[4]-q_s[10])*5/128 +
//			 (q_s[6]-q_s[ 8])/8 - (q_s[6]-q_s[8])/128 + (q_s[6]-q_s[8])/2;
		/* 
		 * Classic Hilbert transform 15 taps, 12 bits (see Iowa Hills):
		 */	
		accu = (q_s[0]-q_s[14])*315L + (q_s[2]-q_s[12])*440L + (q_s[4]-q_s[10])*734L + (q_s[6]-q_s[ 8])*2202L;
		qh = accu / 4096;	 
		
		/* 
		 * SSB demodulate: I[7] - Qh
		 * Range should be within DAC_RANGE
		 * Add 250 offset and send to audio DAC output
		 */
		sample = (i_s[7] - qh)/32;
		pwm_set_chan_level(dac_audio, PWM_CHAN_A, DAC_RANGE/2 + sample);
	
		q_phase = true;								// Next: Q branch
	}

	return true;
}


/* TX TIMER and callback */
volatile int16_t a_s_pre[15], a_s[15], a_dc;
struct repeating_timer tx_timer;
bool tx_callback(struct repeating_timer *t) 
{
	static int tx_phase = 0;
	int16_t sample;
	int32_t accu;
	int16_t qh;
	int i;
	
	if (!tx_enabled) return(true);
	
	/*
	 * Get sample and shift into delay line
	 */
	adc_select_input(2);							// Audio channel ADC 
	for (i=0; i<14; i++) 
		a_s_pre[i] = a_s_pre[i+1];					// Audio samples delay line
	a_s_pre[14] = (int16_t)adc_read()-ADC_RANGE/2;	// Subtract half range (is appr. dc bias)
	
	tx_phase = (tx_phase+1)&0x01;					// Count to 2
	if (tx_phase != 0)								// 
		return true;								//   early bail out 1 out of 2 times
	
	/*
	 * Downsample and low pass
	 */
	for (i=0; i<14; i++) 							// Shift decimated samples
		a_s[i] = a_s[i+1];
	accu = 0;
	for (i=0; i<15; i++)							// Low pass FIR filter
		accu += (int32_t)a_s_pre[i]*lpf3_62[i];		// 3kHz, at 62.5 kHz sampling
	a_s[14] = accu / 256;

	
	/*
	 * Remove DC and store new sample
	 *  w(t) = x(t) + a*w(t-1) (use a=31/32, ca 0.97)
	 *  y(t) = w(t) - w(t-1) 
	 */
	//temp = a_dc;									// a_dc is w(t-1)
	//sample += (int16_t)(((temp<<5)-temp)>>5);		// Use sample as w(t)
	//a_s[14] = sample - a_dc;						// Calculate output
	//a_dc = sample;								// Store new w(t)
		
	/* 
	 * Classic Hilbert transform 15 taps, 12 bits (see Iowa Hills):
	 */	
	accu = (a_s[0]-a_s[14])*315L + (a_s[2]-a_s[12])*440L + (a_s[4]-a_s[10])*734L + (a_s[6]-a_s[ 8])*2202L;
	qh = accu / 4096;	 

	/* 
	 * Write I and Q to QSE DACs, phase is 7 back.
	 * Need to multiply AC with DAC_RANGE/ADC_RANGE (appr 1/16, but compensate for losses)
	 */
	pwm_set_chan_level(dac_iq, PWM_CHAN_A, DAC_RANGE/2 + (a_s[7]/8));
	pwm_set_chan_level(dac_iq, PWM_CHAN_B, DAC_RANGE/2 + (qh/8));

	return true;
}


int dsp_init()
{
	uint16_t slice_num;
	
	/* Initialize DACs */
	gpio_set_function(0, GPIO_FUNC_PWM);			// GP0 is PWM for I DAC (Slice 0, Channel A)
	gpio_set_function(1, GPIO_FUNC_PWM);			// GP1 is PWM for Q DAC (Slice 0, Channel B)
	dac_iq = pwm_gpio_to_slice_num(0);				// Get PWM slice for GP0 (Same for GP1)
	pwm_set_clkdiv_int_frac (dac_iq, 1, 0);			// clock divide by 1
	pwm_set_wrap(dac_iq, DAC_RANGE);				// Set cycle length
	pwm_set_enabled(dac_iq, true); 					// Set the PWM running
	
	gpio_set_function(2, GPIO_FUNC_PWM);			// GP2 is PWM for Audio DAC (Slice 1, Channel A)
	dac_audio = pwm_gpio_to_slice_num(2);			// Find PWM slice for GP2
	pwm_set_clkdiv_int_frac (dac_audio, 1, 0);		// clock divide by 1
	pwm_set_wrap(dac_audio, DAC_RANGE);				// Set cycle length
	pwm_set_enabled(dac_audio, true); 				// Set the PWM running

	/* Initialize ADCs */
	adc_init();
	adc_gpio_init(26);								// GP26 is ADC 0 for I channel
	adc_gpio_init(27);								// GP27 is ADC 1 for Q channel
	adc_gpio_init(28);								// GP28 is ADC 2 for Audio channel
	adc_select_input(0);							// Select ADC 0 

	tx_enabled = false;								// RX mode
		
	//add_repeating_timer_us(-TX_US, tx_callback, NULL, &tx_timer);
	add_repeating_timer_us(-RX_US, rx_callback, NULL, &rx_timer);

    return 0;
}