kopia lustrzana https://github.com/cyoung/stratux
33 wiersze
3.3 KiB
HTML
33 wiersze
3.3 KiB
HTML
<div class="section text-left help-page">
|
|
<p>The <strong>Settings</strong> page provides both control and configuration of your Stratux device.</p>
|
|
|
|
<p>Use the toggles in the <strong>Hardware</strong> section to control which devices are active.</p>
|
|
<p class="text-warning">NOTE: Only hardware toggled on here, will appear on the
|
|
<stron>Status</stron> page.</p>
|
|
|
|
<p>The <strong>Diagnostics</strong> section helps with debugging and communicating with the Stratux project contributors via GitHub and the reddit subgroup.
|
|
<ul class="list-simple">
|
|
<li>Toggling <strong>Traffic Source</strong> adds text for traffic targets within your navigation application. Traffic received via UAT will display <code>u</code> while traffic received via 1090 will display <code>e</code>.</li>
|
|
<li>Toggling <strong>Record Logs</strong> enables logging to a series of files for your Stratux device including data recorded for UAT traffic and weather, 1090 traffic, GPS messages, and AHRS messages. The log files are accessible from the <strong>Logs</strong> menu available on the left.</li>
|
|
</ul>
|
|
|
|
<p>The <strong>Configuration</strong> section lets you adjust the default operation of your Stratux device.</p>
|
|
<ul class="list-simple">
|
|
<li>To avoid having your own aircraft appear as traffic, and scare the bejeezus our of you, you may provide your <strong>Mode S code</strong>. You can find this value in the FAA N-Number Registry for your aircraft. You should use the hexadecimal value (not the octal value) for this setting. No validation is done so please ensure you enter your valide Mode S value.
|
|
</li>
|
|
<li>The <strong>Weather</strong> page uses a user-defined <strong>Watch List</strong> to filter the large volume of ADS-B weather messages for display. Define a list of identifiers (airport, VOR, etc) separated by a spaces. For example <code>KBOS EEN LAH LKP</code>. You may change this list at any time and the <strong>Weather</strong> page will start watching for the updated list immediately.
|
|
<br/>
|
|
<span class="text-warning">NOTE: To save your changes, you must either tap somehwere else on the page or hit <code>ENTER</code> or <code>RETURN</code> or <code>GO</code> (or whatever your keyboard indicates).</span>
|
|
</li>
|
|
<li>The SDR (software defined radio) receiver support an adjustment in the form of a <strong>PPM Correction</strong>. From the Raspberry Pi, you may use the command <code>kal -g 48 -s GSM850</code> to scan for available channels in your area. Then use the command <code>kal -g 48 -c <em>channel#</em></code> to calculate the PPM.
|
|
<br/>
|
|
<span class="text-warning">NOTE: You will need to perform all commands as <code>root</code> by issuing the command: <code>sudo su -</code>. You will need to stop the Stratux software before running the calibration process. You can stop all of the Stratux processes with the command: <code>pkill screen</code>.</span>
|
|
</li>
|
|
<li>Addiitonal settings will be added in future releases.</li>
|
|
</ul>
|
|
<p>The <strong>System</strong> section lets you safely shutdown or reboot your Stratux device.</p>
|
|
<ul>
|
|
<li><strong>Shutdown</strong> will immediately shutdown the Stratux. You may then safely remove power.</li>
|
|
<li><strong>Reboot</strong> will immediately reboot the Stratux. After the reboot you may have to rejoin the WiFi connection to reconnect.</li>
|
|
</ul>
|
|
</div> |