stlink/stlinkv1_macosx_driver
nightwalker-87 5020ba7f92 Resolved conflicts with develop branch. 2020-02-24 23:11:51 +01:00
..
Makefile [add] stlinkv1_macosx_driver from marco.cassinerio@gmail.com 2011-12-16 14:07:17 -06:00
README.md Resolved conflicts with develop branch. 2020-02-24 23:11:51 +01:00
osx.tar.gz add kernelextension for OS X 10.10 Yosemite 2014-10-14 20:58:11 +02:00

README.md

from: marco.cassinerio@gmail.com

to: texane@gmail.com

Hi,

i managed to get the stlink v1 working under os x and i would like to share the solution so maybe you can add it in your package. The problem is that os x claims the device as scsi and libusb won't be able to connect to it. I've created what is called a codeless driver which claims the device and has a higher priority then the default apple mass storage driver, so the device can be accessed through libusb.

I tested this codeless driver under OS X 10.6.8 and 10.7.2. I assume it works with any 10.6.x and 10.7.x version as well.

Attached to this mail you'll find the osx folder with the source code of the driver, both drivers (for 10.6.x and 10.7.x), an install.sh script and the modified Makefile, i only added a line at the end which invoke the install.sh.

First, unpack the osx.tar.gz contents:

tar xzvf osx.tar.gz

Then, install the driver using:

sudo make osx_stlink_shield

no reboot required.

P.S. If error OS X version not supported occurs. For the latest versions of Mac OS X you may need to change the osx/install.sh as follows:

< ISOSXLION=$(sw_vers -productVersion)
---
> ISOSXLION=$(sw_vers -productVersion | sed -e 's:.[[:digit:]]*$::')

OS X 10.10 Yosemite

For OS X 10.10 Yosemite you must force the system to load unsigned kernelextensions

sudo nvram boot-args="kext-dev-mode=1"

reboot the system!

OS X 10.11 El Capitan

For OS X 10.11 El Capitan: the Yosemite kext seems to work (tested on 10.11.04).