v4.16.0 update to the quick start

Quick-start.md

@@ -89,39 +89,41 @@ It is also possible to invoke `sdrangel.exe` from the command line in the direct
 
 You will start with a default "File source" device as the first receiver and no baseband channels. The main window will look like this:
 
-[[/images/quick/quick_01.png|First start]]
+![Quick 01](images/quick/quick_01.png)
 
-To actually start streaming I/Q samples from a device and add baseband channels to hear or see demodulated signals you need to locate the "Sampling devices control" widget:
+To actually start streaming I/Q samples from a device and add baseband channels to hear or see demodulated signals you need to change the device with the change device icon in the top bar of the device panel:
 
-[[/images/quick/quick_02.png|Sampling devices control]]
+![Quick 02](images/quick/quick_02.png)
 
-Start by selecting a device by pushing the button with a finger icon a the right of the "FileSource" display:
+This opens a dialog to let you choose the new device
 
-[[/images/quick/quick_03.png|Select a sampling device]]
+Click near the combo box arrow to open the list of available devices:
 
-Next click near the combo box arrow to open the list of available devices:
-
-[[/images/quick/quick_05.png|Select a sampling device]]
+![Quick 05](images/quick/quick_05.png)
 
 If you have a supported device attached and the plugins were loaded correctly the one you re looking for should appear on the list. Let's take an example with RTL-SDR:
 
-[[/images/quick/quick_06.png|Select RTL-SDR]]
+![Quick 06](images/quick/quick_06.png)
 
 Select it from the list and then click "OK" in the dialog.
 
-Then you will need to add a baseband channel. Click on the arrow in the combo box below the selected device (now RTL-SDR):
+Then you will need to add a baseband channel. Move on to the channels panel and click on the circled plus icon:
 
-[[/images/quick/quick_07.png|Select a channel]]
+![Quick 07](images/quick/quick_07.png)
 
-Let's suppose you want to demodulate narrow band FM (NFM). You select the "NFM demodulator" from the combo list and press the "+" button to add the channel to the passband:
+This opens a dialog to let you choose the channel type to add.
 
-[[/images/quick/quick_08.png|Select NFM demod channel]]
+Let's suppose you want to demodulate narrow band FM (NFM). You select the "NFM demodulator" from the combo list and press the `Apply` button to add the channel to the passband. 
 
-You may add more channels of any kind thus listening to multiple channels simultaneously with possible different modulation schemes.
+![Quick 08](images/quick/quick_08.png)
+
+You may add more channels of any kind by selecting the channel tyoe and press the `Apply` button again. Thus you can listenin to multiple channels simultaneously with possible different modulation schemes.
+
+When you are done you can close the dialog with the `Close` button.
 
 The main window should now look like this:
 
-[[/images/quick/quick_09.png|Almost ready]]
+![Quick 09](images/quick/quick_09.png)
 
   - The center frequency of the passband can be controlled from the main dial of the device interface display (1)
   - The offset frequency (delta) of the channel center within the passband can be set with the channel dial (2)
@@ -129,6 +131,6 @@ The main window should now look like this:
   
 After some tuning you can eventually see something like this:
 
-[[/images/quick/quick_10.png|Almost ready]]
+![Quick 10](images/quick/quick_10.png)
 
 This is a very brief introduction on how to get you started quickly. Please read the other pages of the Wiki in particular to get the details of device and channel plugins.