AudioCATSISOSettings:
  description: AudioCATSISO
  properties:
    rxCenterFrequency:
      type: integer
      format: int64
    txCenterFrequency:
      type: integer
      format: int64
    transverterMode:
      type: integer
    transverterDeltaFrequency:
      type: integer
      format: int64
    iqOrder:
      type: integer
      description: >
        IQ samples order
          * 0 - Q then I (swapped)
          * 1 - I then Q (straight)
    txEnable:
      type: integer
      description: >
        Enable or disable transmission
          * 0 - Disable transmission
          * 1 - Enable transmission
    pttSpectrumLink:
      type: integer
      description: >
        Main spectrum display (Rx/Tx) follows PTT (GUI)
          * 0 - Disable PTT following
          * 1 - Enable PTT following
    rxDeviceName:
      description: The name of the input audio device
      type: string
    rxIQMapping:
      type: integer
      description: >
        Audio channel to IQ mapping
          * 0 - I=L, Q=R
          * 1 - I=R, Q=L
          * 2 - I=L, Q=0
          * 3 - I=R, Q=0
    log2Decim:
      description: Decimation factor (Rx)
      type: integer
    fcPosRx:
      type: integer
      description: >
        Decimated bandpass center frequency position
          * 0 - Infradyne
          * 1 - Supradyne
          * 2 - Centered
    dcBlock:
      type: integer
      description: >
        Auto DC blocking
          * 0 - Off
          * 1 - On
    iqCorrection:
      type: integer
      description: >
        Auto IQ balance (you need auto DC blocking active)
          * 0 - Off
          * 1 - On
    rxVolume:
      type: number
      format: float
    txDeviceName:
      description: The name of the output audio device
      type: string
    txIQMapping:
      type: integer
      description: >
        Audio channel to IQ mapping
          * 0 - I=L, Q=R
          * 1 - I=R, Q=L
    txVolume:
      type: integer
      description: Tx volume in dB usually negative
    catSpeedIndex:
      type: integer
      descriptoion: >
        CAT serial link baud rate
          * 0 - 1200
          * 1 - 2400
          * 2 - 4800
          * 3 - 9800
          * 4 - 19200 (default)
          * 5 - 38400
          * 6 - 57600
          * 7 - 115200
    catDataBitsIndex:
      type: integer
      description: >
        CAT serial link data bits
          * 0 - 7
          * 1 - 8 (default)
    catStopBitsIndex:
      type: integer
      description: >
        CAT serial linkj stop bits
          * 0 - 1 (default)
          * 1 - 2
    catHandshakeIndex:
      type: integer
      description: >
        CAT serial link handshake type
          * 0 - none (default)
          * 1 - XON/XOFF
          * 2 - hardware
    catPTTMethodIndex:
      type: integer
      description: >
        CAT PTT metgod
          * 0 - PTT (default)
          * 1 - DTR
          * 2 - RTS
    catDTRHigh:
      type: integer
      description: >
        CAT DTR control
          * 0 - low
          * 1 - high (default)
    catRTSHigh:
      type: integer
      description: >
        CAT RTS control
          * 0 - low
          * 1 - high (default)
    catPollingMs:
      type: integer
      description: CAT frequency polling interval in milliseconds
    useReverseAPI:
      description: Synchronize with reverse API (1 for yes, 0 for no)
      type: integer
    reverseAPIAddress:
      type: string
    reverseAPIPort:
      type: integer
    reverseAPIDeviceIndex:
      type: integer