kopia lustrzana https://github.com/fhdm-dev/scoppy
initial commit
rodzic
5a7bb4286d
commit
9479c39dc9
|
@ -66,7 +66,7 @@ The pins marked DC are used to select AC or DC coupling. Connect the pins with a
|
|||
The board is compatible with 10X probes. The probe attenuation can be set in the app by tapping the channel badge at the bottom of the screen
|
||||
and then tapping 'Settings' and 'Probe'.
|
||||
|
||||
The frequency compensation of 10X probes will need to be adjusted to match in the input capacitance of the oscilloscope.
|
||||
10X probes may need to be compensated to match in the input capacitance of the oscilloscope. [This video](https://www.youtube.com/watch?v=ke7ST2CUxNo) by R&S explains probe compensation in detail.
|
||||
|
||||
### Board Dimensions
|
||||
See [here](/wiki/fscope-dso-500k-dimensions)
|
||||
|
@ -101,6 +101,10 @@ _H9, R32_
|
|||
<br>
|
||||
For connecting an external status LED if the board is to be enclosed in a case (no firmware support for this as yet).
|
||||
|
||||
_AP/ST_
|
||||
<br>
|
||||
Reserved for future use. We might add support for switching between AP and Station modes by the press of a button attached to these pads.
|
||||
|
||||
### Updating the Firmware
|
||||
|
||||
Download the [latest firmware file](https://github.com/fhdm-dev/scpdl1/raw/master/a/v16/scoppy-dso-500k-p-v16.uf2) to your computer.
|
||||
|
|
|
@ -59,7 +59,7 @@ The pins marked DC are used to select AC or DC coupling. Connect the pins with a
|
|||
The board is compatible with 10X probes. The probe attenuation can be set in the app by tapping the channel badge at the bottom of the screen
|
||||
and then tapping 'Settings' and 'Probe'.
|
||||
|
||||
The frequency compensation of 10X probes will need to be adjusted to match in the input capacitance of the oscilloscope.
|
||||
10X probes may need to be compensated to match in the input capacitance of the oscilloscope. [This video](https://www.youtube.com/watch?v=ke7ST2CUxNo) by R&S explains probe compensation in detail.
|
||||
|
||||
#### Board Dimensions
|
||||
See [here](/wiki/fscope-dso-500k-dimensions)
|
||||
|
@ -86,7 +86,7 @@ of the oscilloscope.
|
|||
|
||||
_H17_
|
||||
<br>
|
||||
Restart/Reset. Shorting these will restart the DSO-500K. A momentary switch could be soldered to these holes/pads to make it easier to restart the oscilloscope. Double clicking the switch will cause the Pico W on the DSO-500K to enter USB mass storage mode.
|
||||
Restart/Reset. Shorting these will restart the DSO-500K. A momentary switch could be soldered to these holes/pads to make it easier to restart the oscilloscope. Double clicking the switch will cause the Pico (or Pico W) to enter USB mass storage mode.
|
||||
|
||||
_H7, H15_
|
||||
<br>
|
||||
|
@ -96,6 +96,10 @@ _H9, R32_
|
|||
<br>
|
||||
For connecting an external status LED if the board is to be enclosed in a case (no firmware support for this as yet).
|
||||
|
||||
_AP/ST_
|
||||
<br>
|
||||
Reserved for future use. We might add support for switching between AP and Station modes by the press of a button attached to these pads.
|
||||
|
||||
|
||||
#### Miscellaneous
|
||||
|
||||
|
@ -105,8 +109,11 @@ The holes at the corners of the board are 3.3mm (130 mil).
|
|||
|
||||
Instructions are on the [Installation & Getting Started](../wiki/Installation-&-Getting-Started) page.
|
||||
|
||||
The firmware file for the Pico is named scoppy-pico-fscope-250k5-vNN.uf2 and the file for the Pico W is named scoppy-pico-wireless-fscope-250k5-vNN.uf2 (where NN is the version number).
|
||||
If you have a DSO-500K, use the Pico W firmware.
|
||||
#### FSCOPE-500K
|
||||
The firmware file for the Pico is named scoppy-fscope-500k-vNN.uf2 and the file for the Pico W is named scoppy-fscope-500k-picow-vNN.uf2 (where NN is the version number).
|
||||
|
||||
#### FSCOPE-500K
|
||||
See [here](/dso-500k).
|
||||
|
||||
### Trimmer capacitor adjustment
|
||||
|
||||
|
|
Ładowanie…
Reference in New Issue