mirror
/
sane-project-website
kopia lustrzana https://gitlab.com/sane-project/website
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
sane-project-website/unsupported/tevion-md90070.html

391 wiersze
13 KiB
HTML
Czysty Bezpośredni odnośnik Wina Historia

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
<title>Scanner information</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="author" content="Henning Meier-Geinitz">
<meta name="keywords" content="sane, backend, driver, scanner, unsupported">
<link href="mailto:henning@meier-geinitz.de" rev="made">
<link rel="icon" href="../favicon.ico" type="image/x-icon">
<link rel="shortcut icon" href="../favicon.ico" type="image/x-icon">
</head>
<body>
<h1>Scanners not supported by SANE</h1>
<h2>Manufacturer and model</h2>
<p>
Tevion MD 90070<br>
Tevion MD 90090<br>
Medion MD 90090
</p>
<h2>Bus type</h2>
<p>
USB
</p>
<h2>Vendor ID</h2>
<p>
0x05da
</p>
<h2>Product ID</h2>
<p>
0x3022
</p>
<h2>Chipset</h2>
<p>
SQ113
</p>
<p>
A user writes: "I opend up the scanner and looked at the chip set. USB is
wired directly to SQ113-A3.1 there was also a crystal next to it and a
Hyinx chip on the back side. smaller chip on the same side SQ100A complete
board was idetified as MED4800 -0504 Rev -B RoHS "
</p>
<h2>Comments</h2>
<p>
The vendor id is Microtek.
</p>
<h2>Output of /proc/bus/usb/devices or sane-find-scanner -v -v or lsusb -vv</h2>
<pre>
90070:
&lt;device descriptor of 0x05da/0x3022 at 004:004 (Prolific Technology Inc. USB Scanner )&gt;
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05DA
idProduct 0x3022
bcdDevice 1.00
iManufacturer 1 (Prolific Technology Inc.)
iProduct 2 (USB Scanner )
iSerialNumber 0 ()
bNumConfigurations 1
&lt;configuration 0&gt;
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 100 mA
&lt;interface 0&gt;
&lt;altsetting 0&gt;
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
&lt;endpoint 0&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 (out 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 1&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 1&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 2&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 3 ms
bRefresh 0
bSynchAddress 0
&lt;trying to find out which USB chip is used&gt;
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bcdUSB = 0x200)
checking for GT-8911 ...
this is not a GT-8911 (check 2, bcdUSB = 0x200)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL841 ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
&lt;Couldn't determine the type of the USB chip&gt;
found USB scanner (vendor=0x05da [Prolific Technology Inc.], product=0x3022 [USB Scanner ]) at libusb:004:004
lsusb -vv
Bus 004 Device 004: ID 05da:3022 Microtek International, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05da Microtek International, Inc.
idProduct 0x3022
bcdDevice 1.00
iManufacturer 1 Prolific Technology Inc.
iProduct 2 USB Scanner
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 3
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
90090:
/proc/bus/usb/devices:
T: Bus=02 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(&gt;ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05da ProdID=3022 Rev= 1.00
S: Manufacturer=Prolific Technology Inc.
S: Product=USB Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=500us
This is sane-find-scanner from sane-backends 1.0.17
&lt;device descriptor of 0x05da/0x3022 at 002:011 (Prolific Technology Inc. USB Scanner )&gt;
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05DA
idProduct 0x3022
bcdDevice 1.00
iManufacturer 1 (Prolific Technology Inc.)
iProduct 2 (USB Scanner )
iSerialNumber 0 ()
bNumConfigurations 1
&lt;configuration 0&gt;
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 100 mA
&lt;interface 0&gt;
&lt;altsetting 0&gt;
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
&lt;endpoint 0&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 (out 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 1&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 (in 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
&lt;endpoint 2&gt;
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 3 ms
bRefresh 0
bSynchAddress 0
&lt;trying to find out which USB chip is used&gt;
checking for GT-6801 ...
this is not a GT-6801 (bDeviceClass = 0)
checking for GT-6816 ...
this is not a GT-6816 (bcdUSB = 0x200)
checking for GT-8911 ...
this is not a GT-8911 (check 2, bcdUSB = 0x200)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bDeviceClass = 0)
checking for MA-1509 ...
this is not a MA-1509 (bDeviceClass = 0)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
checking for GL841 ...
this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
checking for ICM532B ...
this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
checking for PV8630/LM9830 ...
this is not a PV8630/LM9830 (bcdUSB = 0x200)
checking for M011 ...
this is not a M011 (bDeviceClass = 0)
checking for RTS8822L-01H ...
this is not a RTS8822L-01H (bEndpointAddress = 0x1, bmAttributes = 0x2, wMaxPacketSize = 0x200, bInterval = 0x0)
checking for rts8858c ...
this is not a rts8858c (bcdUSB = 0x200)
checking for SQ113 ...
&lt;This USB chip looks like a SQ113&gt;
found USB scanner (vendor=0x05da [Prolific Technology Inc.], product=0x3022 [USB Scanner ], chip=SQ113) at libusb:002:011'
</pre>
<h1>Want to add or correct information?</h1>
<p>
If anything is wrong or missing on this page please <a href="../bugs.html">file a bug report</a>
or use the <a href="http://www.meier-geinitz.de:80/tinc?key=rDoQ7lrj&#38;formname=adddev" target="_top">the
form for adding an unsupported device</a>.
</p>
<p>
If you own an unsupported scanner, please send as much information as
possible. Especially the output of <em>sane-find-scanner -v -v</em>
and/or <em>cat /proc/scsi/scsi</em> (for SCSI scanners) or <em>cat
/proc/bus/usb/devices</em> (for USB scanners) can help. If you dare to
open the scanner, have a look at the text that's printed on the
chips. That may help to identify the chipset. If you know that the
scanner is similar to another one (e.g. supported by the same Windows
driver), please also mention this fact.
</p>
<h1><a href="../manufacturers.html">Information for Manufacturers</a></h1>
<p>
Are you a manufacturer or vendor of scanners and one of your scanners is
not supported by SANE yet? In this case please have a look at our <a
href="../manufacturers.html">information for manufacturers</a>.
</p>
<hr>
<p>
<a href="../">SANE homepage</a><br>
<a href="../imprint.html">Contact</a>
</p>
</body>
</html>
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik