kopia lustrzana https://gitlab.com/sane-project/backends
44 wiersze
1.5 KiB
Plaintext
44 wiersze
1.5 KiB
Plaintext
# pixma.conf configuration for the sane pixma backend
|
|
#
|
|
# disable network scanner detection.
|
|
# This must be the first not commented line
|
|
# Uncomment the following line:
|
|
# networking=no
|
|
#
|
|
### BJNP/MFNP configuration
|
|
# bjnp-timeout=5000
|
|
# Specify the timeout (in ms) to be used for all the folllowing
|
|
# scanners.
|
|
# May be specified multiple times.
|
|
# The last value (if any) will be used for auto-detection
|
|
#
|
|
# define URI's of scanners (one per line)
|
|
# This is only used for network scanners.
|
|
# normally scanners will be detected by sending a broadcast
|
|
# if this does not work under your OS, or if the scanners
|
|
# are on a different subnet, configure your scanners URI here
|
|
#
|
|
# method must be bjnp
|
|
# port number can normally be left out, port 8612 is used as default
|
|
# The timeout parameter sets a timeout value for the scanner on
|
|
# the same line
|
|
# Examples using bjnp:
|
|
# bjnp://myscanner.my.domain:8612 // uses the default 1000ms timeout
|
|
# bjnp-timeout=5000
|
|
# bjnp://printer-1.pheasant.org // will use the 5000 ms timeout
|
|
# bjnp://scanner.bad-network.org/timeout=1500 // timeout set to 1500 ms
|
|
# bjnp-timeout=3000 // will be used for auto-detected scanners
|
|
#
|
|
# Example using for a scanner using mfnp including the optional timeout:
|
|
# mfnp://scanner.bad-network.org/timeout=1500
|
|
#
|
|
#
|
|
### AXIS configuration
|
|
# Uncomment the following line to enable auto detection of AXIS network
|
|
# scanners (on the same subnet):
|
|
# axis_auto_detection=yes
|
|
#
|
|
# Or add a scanner manually:
|
|
# axis://myscanner.my.domain
|
|
# axis://192.168.0.123
|