rdz_ttgo_sonde/RX_FSK/data/cfg.js

176 wiersze
7.9 KiB
JavaScript
Czysty Wina Historia

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

var cfgs = [
[ "", "General configuration", "https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/General-configuration" ],
[ "wifi", "Wifi mode (0=off, 1=client, 2=AP, 3=client or AP autoselect on startup)" ],
[ "mdnsname", "Network mDNS name"],
[ "ephftp", "FTP server for ephemeris data (RS92 decoder)"],
[ "debug", "Debug mode (0/1)" ],
[ "maxsonde", "Maximum number of QRG entries (must be ≤ 50)" ],
[ "rxlat", "Receiver fixed latitude"],
[ "rxlon", "Receiver fixed longitude"],
[ "rxalt", "Receiver fixed altitude"],
[ "", "OLED/TFT display configuration", "https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/Display-configuration" ],
[ "screenfile", "Screen config (0=automatic; 1-5=predefined; other=custom)" ],
[ "display", "Display screens (scan, default, ...)" ],
[ "dispsaver", "Display saver (0=never/1=always/2=ifnorx [+10*n: after n sec.])" ],
[ "dispcontrast", "OLED contrast (-1=use default; 0..255=set contrast)" ],
[ "norx_timeout", "No-RX-timeout in seconds (-1=disabled)"],
[ "tft_orient", "TFT orientation (0/1/2/3), OLED flip: 3"],
[ "", "Spectrum display configuration", "https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/Spectrum-configuration" ],
[ "spectrum", "Show spectrum on start (-1=no, 0=forever, >0=time [sec])" ],
[ "startfreq", "Start frequency (MHz, default 400)" ],
[ "channelbw", "Bandwidth (kHz)" ],
[ "marker", "Spectrum MHz marker" ], // maybe remove, assume always ==1?
[ "noisefloor", "Spectrum noisefloor" ],
[ "", "Receiver configuration", "https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/Receiver-configuration" ],
[ "freqofs", "RX frequency offset (Hz)"],
[ "rs41.agcbw", "RS41 AGC bandwidth"],
[ "rs41.rxbw", "RS41 RX bandwidth"],
[ "rs92.rxbw", "RS92 RX (and AGC) bandwidth"],
[ "rs92.alt2d", "RS92 2D fix default altitude"],
[ "dfm.agcbw", "DFM AGC bandwidth"],
[ "dfm.rxbw", "DFM RX bandwidth"],
[ "m10m20.agcbw", "M10/M20 AGC bandwidth"],
[ "m10m20.rxbw", "M10/M20 RX bandwidth"],
[ "mp3h.agcbw", "MP3H AGC bandwidth"],
[ "mp3h.rxbw", "MP3H RX bandwidth"],
[ "", "KISS TNC/AXUDP/AXTCP data feed configuration", "https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/Data-feed-configuration"],
[ "call", "Call"],
[ "passcode", "Passcode"],
[ "kisstnc.active", "KISS TNC (port 14590) (needs reboot)"],
[ "axudp.active", "AXUDP active"],
[ "axudp.host", "AXUDP host"],
[ "axudp.port", "AXUDP port"],
[ "axudp.highrate", "Rate limit"],
[ "tcp.active", "APRS TCP active"],
[ "tcp.timeout", "APRS TCP timeout [s] (0=off, 25=on)"],
[ "tcp.host", "APRS TCP host"],
[ "tcp.port", "APRS TCP port"],
[ "tcp.highrate", "Rate limit"],
[ "tcp.objcall", "APRS object call"],
[ "tcp.beaconsym", "APRS tracker symbol"],
[ "tcp.chase", "APRS location reporting (0=off, 1=fixed, 2=chase/GPS, 3=auto)"],
[ "tcp.comment", "APRS location comment"],
[ "", "MQTT data feed configuration", "https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/MQTT-configuration"],
[ "mqtt.active", "MQTT active (needs reboot)"],
[ "mqtt.id", "MQTT client ID"],
[ "mqtt.host", "MQTT server hostname"],
[ "mqtt.port", "MQTT port"],
[ "mqtt.username", "MQTT username"],
[ "mqtt.password", "MQTT password"],
[ "mqtt.prefix", "MQTT prefix"],
[ "", "Chasemapper settings", "https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/Chasemapper-configuration"],
[ "cm.active", "Chasemapper active (0=disabled, 1=active)"],
[ "cm.host", "Chasemapper UDP host"],
[ "cm.port", "Chasemapper UDP port"],
[ "", "SondeHub settings", "https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/SondeHub-settings"],
[ "sondehub.active", "SondeHub reporting (0=disabled, 1=active)"],
[ "sondehub.chase", "SondeHub location reporting (0=off, 1=fixed, 2=chase/GPS, 3=auto)"],
[ "sondehub.host", "SondeHub host (DO NOT CHANGE)"],
[ "sondehub.callsign", "Callsign"],
[ "sondehub.antenna", "Antenna (optional, visisble on SondeHub tracker)"],
[ "sondehub.email", "SondeHub email (optional, only used to contact in case of upload errors)"],
[ "", "SondeHub frequency import", "https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/SondeHub-import" ],
[ "sondehub.fiactive", "SondeHub frequency import active (0=disabled, 1=active)" ],
[ "sondehub.fiinterval", "Import frequency (minutes, ≥ 5)" ],
[ "sondehub.fimaxdist", "Import maximum distance (km, ≤ 700)" ],
[ "sondehub.fimaxage", "Import maximum age (hours, ≤ 48)" ],
[ "", "Hardware configuration (requires reboot)", "https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/Hardware-configuration"],
[ "disptype", "Display type (0=OLED/SSD1306, 1=ILI9225, 2=OLED/SH1106, 3=ILI9341, 4=ILI9342, 5=ST7789)"],
[ "oled_sda", "OLED SDA/TFT SDA"],
[ "oled_scl", "OLED SCL/TFT CLK"],
[ "oled_rst", "OLED RST/TFT RST (needs reboot)"],
[ "tft_rs", "TFT RS"],
[ "tft_cs", "TFT CS"],
[ "tft_spifreq", "TFT SPI speed"],
[ "button_pin", "Button input port"],
[ "button2_pin", "Button 2 input port"],
[ "button2_axp", "Use AXP192 PWR as Button 2"],
[ "touch_thresh", "Touch button threshold<br>(0 for calib mode)"],
[ "power_pout", "Power control port"],
[ "led_pout", "LED output port"],
[ "gps_rxd", "GPS RXD pin (-1 to disable)"],
[ "gps_txd", "GPS TXD pin (not really needed)"],
[ "batt_adc", "Battery measurement pin"],
[ "sx1278_ss", "SX1278 SS"],
[ "sx1278_miso", "SX1278 MISO"],
[ "sx1278_mosi", "SX1278 MOSI"],
[ "sx1278_sck", "SX1278 SCK"],
];
function mkcfg(id, key, label, value) {
var s = "<tr style=\"visibility: collapse;\" class=\"cfgpanel\"><td>" + label + "</td><td><input name=\"" + key + "\" type=\"text\" value=\"" + value + "\"/></td></tr>\n";
return s;
}
function mkcfgbtn(id, key, label, value) {
var touch = "";
var v = value;
if(v != -1 && (v&128)) {
touch = " checked";
v = v & 127;
}
var s = "<tr style=\"visibility:collapse\" class=\"cfgpanel\"><td>" + label + "</td><td><input name=\"" + key + "\" type=\"text\" size=\"3\" value=\"" + v + "\"/>";
s += "<input type=\"checkbox\" name=\"" + key + "#\" "+touch+"> Touch</td></tr>\n";
return s;
}
function mksep(id,label,url) {
return "<tr class=\"cfgheader\"><th class=\"cfg\" align=\"left\" colspan=\"2\">"+label+" <a href=\""+url+"\" target=\”_blank\">[wiki]</a></th></tr>\n";
}
function rowdisp(id,disp) {
var matches = document.querySelectorAll("tr."+id);
matches.forEach(function(e) { if(disp) e.hidden=true; else e.removeAttribute('hidden');});
hid=id; nid="N"+id;
if(!disp) { hid=nid; nid=id; }
document.querySelector("span."+hid).hidden=true;
document.querySelector("span."+nid).removeAttribute('hidden');
}
function configTable() {
// iterate over cfgs
var tab = "<table width=\"100%\"><tr><th>Option</th><th>Value</th></tr>\n";
var id=0;
for(i=0; i<cfgs.length; i++) {
var key = cfgs[i][0];
var lbl = cfgs[i][1];
if(key) {
if(key=="button_pin" || key=="button2_pin") {
tab += mkcfgbtn("s"+id, key, lbl, cf.get(key));
} else if (key=="display") {
tab += mkcfg("s"+id, key, lbl, cf.get(key));
tab += "<tr style=\"visibility:collapse\" class=\"cfgpanel\"><td>"+scr+"</td><td></td></tr>"
} else {
tab += mkcfg("s"+id, key, lbl, cf.get(key));
}
} else {
id++;
tab += mksep("s"+id, lbl, cfgs[i][2]);
}
}
tab += "</table>";
var cfgdiv = document.getElementById("cfgtab");
cfgdiv.innerHTML = tab;
// enable collapse / expand of items below a header
var acc = document.getElementsByClassName("cfgheader");
for(i=0; i<acc.length; i++) {
acc[i].firstChild.innerHTML = "[+] " + acc[i].firstChild.innerHTML;
acc[i].addEventListener("click", function(e) {
if(e.target.nodeName=="A") return;
achar = "[+]";
if(this.classList.toggle("active")) achar = "[\u2212]";
this.firstChild.innerHTML = achar + this.firstChild.innerHTML.substring(3);
var panel = this;
console.log(panel);
while( panel = panel.nextElementSibling) {
console.log(panel);
if ( panel.className!="cfgpanel") { break; }
if(panel.style.visibility==="collapse") {
panel.style.visibility="visible";
} else {
console.log("none");
panel.style.visibility="collapse";
}
}
});
}
acc[0].click();
}