## screens3.txt: TFT display (portrait)
## based on http://www.p1337.synology.me/dokuwiki/doku.php?id=public:wettersonden
# Definition of display content and action behaviour
#
# Timer: (view timer, rx timer, norx timer)
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
# - view timer: time since current view (display mode and sonde) was started
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
# - norx timer: time since when no sonde data has been received continuously
#   (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
#    anything for a 1s period)
# 
# Actions:
# - W: activate WiFi scan
# - F: activate frequency spectrum display
# - 0: activate "Scan:" display (this is basically just display mode 0)
# - x: (1..N): activate display mode x [deprecated]
# - >: activate next display mode 
# - D: activate default receiver display (display mode specified in config)
# - +: advance to next active sonde from QRG config
# - #: no action
#
# Display content (lower/upper case: small/large font)
#    line,column=content
# for ILI9225 its also possible to indicate
#    line,column,width=content          for text within a box of width 'width'
#    line,column,-width=content         for right-justified text
#
# XText : Text
# F(suffix): frequency (with suffix, e.g., " MHz")
# L latitade
# O lOngitute
# A altitude
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s  as 16x8 bitmap for SSD1306 display only)
# Ix sonde ID (default/d: dxlaprs; s: short id, n: real serial number)
#    RS41,RS92: all identical R1234567
#    DFMx: ID M12345678; short ID and serial 12345678
#    M10: ID ME95231F0; short ID: M95231F0; serial 9062104592
# Q signal quality statistics bar
# T type string (RS41/DFM9/DFM6/RS92)
# C afC value
# N ip address (only tiny font)
# S scan list entry info:  l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t  
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
#   format: K_4: h:mm k_6: h:mm:ss k_s: sssss,  nothing shown for other sonde
# Mx telemetry value x (t temp p preassure h hyg) [not yet implemented, maybe some day in future]
# Gx  GPS-related data
#     raw data from GPS:  GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
#     relative to sonde:  GD, GI, GB: Distance, dIrection (absolute), relative Bearing
# G0  GPS circle diagram e.g.  3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
#     "N" (what is on top: N=north C=course)
#     "C" (where does the arrow point to: C=course, S=sonde)
#     "S" (what is shown by the bullet: C=course, S=sonde)
#     50: circle radius, followed by fg and bg color
#     5: bullet radius, followed by fg color
#     4: arrow width, followed by fg color
# R RSSI
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
#                       U=USB volt I=USB current  T=IC temp
#
# fonts=x,y can be used to select font (x=small, y=large) for all items below
# for SSD1306, x and y can be used to select one of those fonts:
# (y should be a 1x2 font (1,5,6,7), x a small font)
#                u8x8_font_chroma48medium8_r,        // 0 ** default small
#                u8x8_font_7x14_1x2_f,               // 1 ** default large
#                u8x8_font_amstrad_cpc_extended_f,   // 2
#                u8x8_font_5x7_f,                    // 3
#                u8x8_font_5x8_f,                    // 4
#                u8x8_font_8x13_1x2_f,               // 5
#                u8x8_font_8x13B_1x2_f,              // 6
#                u8x8_font_7x14B_1x2_f,              // 7
#                u8x8_font_artossans8_r,             // 8
#                u8x8_font_artosserif8_r,            // 9
#                u8x8_font_torussansbold8_r,         // 10 
#                u8x8_font_victoriabold8_r,          // 11
#                u8x8_font_victoriamedium8_r,        // 12
#                u8x8_font_pressstart2p_f,           // 13
#                u8x8_font_pcsenior_f,               // 14
#                u8x8_font_pxplusibmcgathin_f,       // 15
#                u8x8_font_pxplusibmcga_f,           // 16
#                u8x8_font_pxplustandynewtv_f,       // 17
#
# for ILI9225, these fonts are available:
# 	Terminal6x8		// 0
#       Terminal11x16		// 1
#       Terminal12x16		// 2
#	FreeMono9pt7b,          // 3
#       FreeMono12pt7b,         // 4
#       FreeSans9pt7b,          // 5
#       FreeSans12pt7b,         // 6
#       Picopixel,  		// 7
#
# color=rrggbb,rrggbb  can be used to select color (foreground, background)
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
#
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
# with scale=1,1 you can directly use pixel coordinates.  (default: xscale=13,yscale=22 => 8 lines, 16 columns)

###########
# 
# Default configuration for "Scanner" display:
# - view timer disabled;  rx timer=0; norx timer = 0
#   => after 1 second immediately an action is triggered
#      (norx: go to next sonde; rx: go to default receiver display)
# - key1 actions: D,0,F,W
#   => Button press activates default receiver view, double press does nothing
#      Mid press activates Spectrum display, long press activates Wifi scan
# - key2 has no function
###########
@ScannerTFT-D
timer=-1,0,0
key1action=F,#,#,W
key2action=>,#,#,#
timeaction=#,D,+
scale=11,10
fonts=0,2
color=FFFFFF
0,0.3=XSuche...
color=79CDCD
3,0.3=xFreq. Platz
color=FFFFFF
4,0.3,3=S#
color=79CDCD,0
6,0.3=xStartort
color=FFFFFF
7,0.3,20=S
color=79CDCD,0
9,0.3=xTyp
color=FFFFFF
10,0.33,5=T
color=79CDCD
9,15=xFrequenz
color=FFFFFF
10,15=F
color=79CDCD
28,0.3=xScanner
28,9=n
28,21=bVV


############
@MainTFT-D
timer=-1,-1,-1
key1action=0,#,F,W
key2action=+,#,#,#
timeaction=#,#,0
scale=11,10
fonts=0,2
color=79CDCD
0,0.3=xSerial
0,6,10=t
color=FFFFFF
1,0.3=Is
color=79CDCD
0,14=xFreq.
0,17.5=s
color=FFFFFF
1,14=F
color=79CDCD
3,0.3=xLatitude
color=FFFFFF
4,0.3,10=L
color=79CDCD
3,14=xLongitude
color=FFFFFF
4,14,23=O
color=79CDCD
6,0.3=xHoriz. Geschw.
color=FFFFFF
7,0.3,10=Hkkm/h
color=79CDCD
6,14=xVert. Geschw.
color=FFFFFF
7,14,23=Vm/s
color=79CDCD
9.5,14=xHoehe Sonde
color=ffff00
10.7,14,23=A
color=ffff00,000033
9,1=g0CCS,45,ffff00,000044,4,55ff55,4,eeaa00
color=bbbbbb,000000
color=79CDCD
12.5,14=xHoehe RX
color=ffff00
13.5,14,23=GH
color=79CDCD
15.5,14=xTimer
color=ffff00
16.5,14,23=Kc4
fonts=0,8
color=FFFFFF
18.7,0,-12.3=GD
fonts=0,2
color=79CDCD
19,14=xRSSI
color=FFFFFF
20,14,23=R
color=79CDCD
22,0.3=xLufttemperatur
color=FFFFFF
23,0.3,10=Mt°C
color=79CDCD
22,14=xLuftfeuchtigkeit
color=FFFFFF
23,14,23=Mh%rH
color=79CDCD
25,0.3=xLuftdruck
color=FFFFFF
26,0.3,10=MphPa
color=79CDCD
25,14=xZellenspannung
color=FFFFFF
26,14,23=MbV
color=FFFFFF
28,0.3=Q
color=79CDCD
28,13=c
28,21=bVV

###########
@ScannerTFT-E
timer=-1,0,0
key1action=F,#,#,W
key2action=>,#,#,#
timeaction=#,D,+
scale=11,10
fonts=0,2
color=FFFFFF
0,0.3=XScan...
color=79CDCD
3,0.3=xFreq. index
color=FFFFFF
4,0.3,3=S#
color=79CDCD,0
6,0.3=xLaunchsize
color=FFFFFF
7,0.3,20=S
color=79CDCD,0
9,0.3=xType
color=FFFFFF
10,0.33,5=T
color=79CDCD
6,15=xFrequency
color=FFFFFF
7,15=F
color=79CDCD
28,0.3=xScanner
28,9=n
28,21=bVV

############
@MainTFT
timer=-1,-1,-1
key1action=0,#,F,W
key2action=+,#,#,#
timeaction=#,#,0
scale=11,10
fonts=0,2
color=79CDCD
0,0.3=xSerial
0,6,10=t
color=FFFFFF
1,0.3=Is
color=79CDCD
0,14=xFreq.
0,17.5=s
color=FFFFFF
1,14=F
color=79CDCD
3,0.3=xLatitude
color=FFFFFF
4,0.3,10=L
color=79CDCD
3,14=xLongitude
color=FFFFFF
4,14,23=O
color=79CDCD
6,0.3=xHor.Velocity
color=FFFFFF
7,0.3,10=Hkkm/h
color=79CDCD
6,14=xVert.Velocity
color=FFFFFF
7,14,23=Vm/s
color=79CDCD
9.5,14=xAltitude
color=ffff00
10.7,14,23=A
color=ffff00,000033
9,1=g0CCS,45,ffff00,000044,4,55ff55,4,eeaa00
color=bbbbbb,000000
color=79CDCD
12.5,14=xRX Altitude
color=ffff00
13.5,14,23=GH
color=79CDCD
15.5,14=xTimer
color=ffff00
16.5,14,23=Kc4
fonts=0,8
color=FFFFFF
18.7,0,-12.3=GD
fonts=0,2
color=79CDCD
19,14=xRSSI
color=FFFFFF
20,14,23=R
color=79CDCD
22,0.3=xTemperature
color=FFFFFF
23,0.3,10=Mt°C
color=79CDCD
22,14=xHumidity
color=FFFFFF
23,14,23=Mh%rH
color=79CDCD
25,0.3=xPressure
color=FFFFFF
26,0.3,10=MphPa
color=79CDCD
25,14=xSonde Battery
color=FFFFFF
26,14,23=MbV
color=FFFFFF
28,0.3=Q
color=79CDCD
28,13=c
28,21=bVV