kopia lustrzana https://github.com/pimoroni/pimoroni-pico
161 wiersze
4.9 KiB
Python
161 wiersze
4.9 KiB
Python
import gc
|
|
import time
|
|
from motor import Motor, motor2040
|
|
from encoder import Encoder, MMME_CPR
|
|
from pimoroni import Button, PID, REVERSED_DIR
|
|
|
|
"""
|
|
A demonstration of driving all four of Motor 2040's motor outputs through a
|
|
sequence of velocities, with the help of their attached encoders and PID control.
|
|
|
|
Press "Boot" to exit the program.
|
|
"""
|
|
|
|
# Wheel friendly names
|
|
FL = 2
|
|
FR = 3
|
|
RL = 1
|
|
RR = 0
|
|
|
|
GEAR_RATIO = 50 # The gear ratio of the motors
|
|
COUNTS_PER_REV = MMME_CPR * GEAR_RATIO # The counts per revolution of each motor's output shaft
|
|
|
|
SPEED_SCALE = 5.4 # The scaling to apply to each motor's speed to match its real-world speed
|
|
|
|
UPDATES = 100 # How many times to update the motor per second
|
|
UPDATE_RATE = 1 / UPDATES
|
|
TIME_FOR_EACH_MOVE = 2 # The time to travel between each value
|
|
UPDATES_PER_MOVE = TIME_FOR_EACH_MOVE * UPDATES
|
|
PRINT_DIVIDER = 4 # How many of the updates should be printed (i.e. 2 would be every other update)
|
|
|
|
DRIVING_SPEED = 1.0 # The speed to drive the wheels at
|
|
|
|
# PID values
|
|
VEL_KP = 30.0 # Velocity proportional (P) gain
|
|
VEL_KI = 0.0 # Velocity integral (I) gain
|
|
VEL_KD = 0.4 # Velocity derivative (D) gain
|
|
|
|
|
|
# Free up hardware resources ahead of creating a new Encoder
|
|
gc.collect()
|
|
|
|
# Create a list of motors with a given speed scale
|
|
MOTOR_PINS = [motor2040.MOTOR_A, motor2040.MOTOR_B, motor2040.MOTOR_C, motor2040.MOTOR_D]
|
|
motors = [Motor(pins, speed_scale=SPEED_SCALE) for pins in MOTOR_PINS]
|
|
|
|
# Create a list of encoders, using PIO 0, with the given counts per revolution
|
|
ENCODER_PINS = [motor2040.ENCODER_A, motor2040.ENCODER_B, motor2040.ENCODER_C, motor2040.ENCODER_D]
|
|
ENCODER_NAMES = ["RR", "RL", "FL", "FR"]
|
|
encoders = [Encoder(0, i, ENCODER_PINS[i], counts_per_rev=COUNTS_PER_REV, count_microsteps=True) for i in range(motor2040.NUM_MOTORS)]
|
|
|
|
# Reverse the direction of the B and D motors and encoders
|
|
motors[FL].direction(REVERSED_DIR)
|
|
motors[RL].direction(REVERSED_DIR)
|
|
encoders[FL].direction(REVERSED_DIR)
|
|
encoders[RL].direction(REVERSED_DIR)
|
|
|
|
# Create the user button
|
|
user_sw = Button(motor2040.USER_SW)
|
|
|
|
# Create PID objects for position control
|
|
vel_pids = [PID(VEL_KP, VEL_KI, VEL_KD, UPDATE_RATE) for i in range(motor2040.NUM_MOTORS)]
|
|
|
|
|
|
# Helper functions for driving in common directions
|
|
def drive_forward(speed):
|
|
vel_pids[FL].setpoint = speed
|
|
vel_pids[FR].setpoint = speed
|
|
vel_pids[RL].setpoint = speed
|
|
vel_pids[RR].setpoint = speed
|
|
|
|
|
|
def turn_right(speed):
|
|
vel_pids[FL].setpoint = speed
|
|
vel_pids[FR].setpoint = -speed
|
|
vel_pids[RL].setpoint = speed
|
|
vel_pids[RR].setpoint = -speed
|
|
|
|
|
|
def strafe_right(speed):
|
|
vel_pids[FL].setpoint = speed
|
|
vel_pids[FR].setpoint = -speed
|
|
vel_pids[RL].setpoint = -speed
|
|
vel_pids[RR].setpoint = speed
|
|
|
|
|
|
def stop():
|
|
vel_pids[FL].setpoint = 0
|
|
vel_pids[FR].setpoint = 0
|
|
vel_pids[RL].setpoint = 0
|
|
vel_pids[RR].setpoint = 0
|
|
|
|
|
|
# Enable the motor to get started
|
|
for m in motors:
|
|
m.enable()
|
|
|
|
|
|
update = 0
|
|
print_count = 0
|
|
sequence = 0
|
|
|
|
captures = [None] * motor2040.NUM_MOTORS
|
|
|
|
# Continually move the motor until the user button is pressed
|
|
while user_sw.raw() is not True:
|
|
|
|
# Capture the state of all the encoders
|
|
for i in range(motor2040.NUM_MOTORS):
|
|
captures[i] = encoders[i].capture()
|
|
|
|
for i in range(motor2040.NUM_MOTORS):
|
|
# Calculate the acceleration to apply to the motor to move it closer to the velocity setpoint
|
|
accel = vel_pids[i].calculate(captures[i].revolutions_per_second)
|
|
|
|
# Accelerate or decelerate the motor
|
|
motors[i].speed(motors[i].speed() + (accel * UPDATE_RATE))
|
|
|
|
# Print out the current motor values, but only on every multiple
|
|
if print_count == 0:
|
|
for i in range(motor2040.NUM_MOTORS):
|
|
print(ENCODER_NAMES[i], "=", captures[i].revolutions_per_second, end=", ")
|
|
print()
|
|
|
|
# Increment the print count, and wrap it
|
|
print_count = (print_count + 1) % PRINT_DIVIDER
|
|
|
|
update += 1 # Move along in time
|
|
|
|
# Have we reached the end of this movement?
|
|
if update >= UPDATES_PER_MOVE:
|
|
update = 0 # Reset the counter
|
|
|
|
# Move on to the next part of the sequence
|
|
sequence += 1
|
|
|
|
# Loop the sequence back around
|
|
if sequence >= 7:
|
|
sequence = 0
|
|
|
|
# Set the motor speeds, based on the sequence
|
|
if sequence == 0:
|
|
drive_forward(DRIVING_SPEED)
|
|
elif sequence == 1:
|
|
drive_forward(-DRIVING_SPEED)
|
|
elif sequence == 2:
|
|
turn_right(DRIVING_SPEED)
|
|
elif sequence == 3:
|
|
turn_right(-DRIVING_SPEED)
|
|
elif sequence == 4:
|
|
strafe_right(DRIVING_SPEED)
|
|
elif sequence == 5:
|
|
strafe_right(-DRIVING_SPEED)
|
|
elif sequence == 6:
|
|
stop()
|
|
|
|
time.sleep(UPDATE_RATE)
|
|
|
|
# Stop all the motors
|
|
for m in motors:
|
|
m.disable()
|