kopia lustrzana https://github.com/pimoroni/pimoroni-pico
60 wiersze
1.7 KiB
C++
60 wiersze
1.7 KiB
C++
#include <cstdio>
|
|
#include "pico/stdlib.h"
|
|
|
|
#include "servo2040.hpp"
|
|
#include "analogmux.hpp"
|
|
#include "analog.hpp"
|
|
#include "button.hpp"
|
|
|
|
/*
|
|
Shows how to initialise and read the 6 external
|
|
and 2 internal sensors of Servo 2040.
|
|
|
|
Press "Boot" to exit the program.
|
|
*/
|
|
|
|
using namespace servo;
|
|
|
|
// Set up the shared analog inputs
|
|
Analog sen_adc = Analog(servo2040::SHARED_ADC);
|
|
Analog vol_adc = Analog(servo2040::SHARED_ADC, servo2040::VOLTAGE_GAIN);
|
|
Analog cur_adc = Analog(servo2040::SHARED_ADC, servo2040::CURRENT_GAIN,
|
|
servo2040::SHUNT_RESISTOR, servo2040::CURRENT_OFFSET);
|
|
|
|
// Set up the analog multiplexer, including the pin for controlling pull-up/pull-down
|
|
AnalogMux mux = AnalogMux(servo2040::ADC_ADDR_0, servo2040::ADC_ADDR_1, servo2040::ADC_ADDR_2,
|
|
PIN_UNUSED, servo2040::SHARED_ADC);
|
|
|
|
// Create the user button
|
|
Button user_sw(servo2040::USER_SW);
|
|
|
|
|
|
int main() {
|
|
stdio_init_all();
|
|
|
|
// Set up the sensor addresses with pull downs
|
|
for(auto i = 0u; i < servo2040::NUM_SENSORS; i++) {
|
|
mux.configure_pulls(servo2040::SENSOR_1_ADDR + i, false, true);
|
|
}
|
|
|
|
// Read sensors until the user button is pressed
|
|
while(!user_sw.raw()) {
|
|
|
|
// Read each sensor in turn and print its voltage
|
|
for(auto i = 0u; i < servo2040::NUM_SENSORS; i++) {
|
|
mux.select(servo2040::SENSOR_1_ADDR + i);
|
|
printf("S%d = %f, ", i + 1, sen_adc.read_voltage());
|
|
}
|
|
|
|
// Read the voltage sense and print the value
|
|
mux.select(servo2040::VOLTAGE_SENSE_ADDR);
|
|
printf("Voltage = %f, ", vol_adc.read_voltage());
|
|
|
|
// Read the current sense and print the value
|
|
mux.select(servo2040::CURRENT_SENSE_ADDR);
|
|
printf("Current = %f\n", cur_adc.read_current());
|
|
|
|
sleep_ms(500);
|
|
}
|
|
}
|