pimoroni-pico/examples/pico_tof_display/pico_tof_display.cpp

217 wiersze
6.3 KiB
C++

#include <string.h>
// **************************************************************************
// Demonstrate the Pimoroni ToF module (VL53L1X)
// Assumes that a Pico Display Pack (a 1.14inch IPS LCD screen with four
// useful buttons) is installed, and that the VL53L1X I2C module has
// sda, scl and int on GPIO 20, 21 and 22
// Displays the current distance (in mm) and mode
// Button B holds the reading until released
// Button X toggles metric/imperial display
// Button Y increments the mode (Auto, Short, Medium, Long)
// (There are on-screen reminders of the active buttons)
// **************************************************************************
// To use PicoExplorer rather than PicoDisplay, uncomment the following line
#define USE_PICO_EXPLORER 1
// This:
// - Includes pico_explorer.hpp rather than pico_display.hpp
// - Replaces all PicoDisplay references with PicoExplorer
// - Leaves out the .set_led() calls in flash_led()
#ifdef USE_PICO_EXPLORER
#include "pico_explorer.hpp"
#else
#include "pico_display.hpp"
#endif
#include "vl53l1x.hpp"
#include "drivers/button/button.hpp"
#include "drivers/rgbled/rgbled.hpp"
#include "drivers/st7789/st7789.hpp"
#include "libraries/pico_graphics/pico_graphics.hpp"
using namespace pimoroni;
#ifdef USE_PICO_EXPLORER
ST7789 st7789(PicoExplorer::WIDTH, PicoExplorer::HEIGHT, ROTATE_0, false, get_spi_pins(BG_SPI_FRONT));
Button button_a(PicoExplorer::A);
Button button_b(PicoExplorer::B);
Button button_x(PicoExplorer::X);
Button button_y(PicoExplorer::Y);
uint16_t disptext_reminder_size = 2;
uint16_t disptext_b_reminder_xoff = 5;
uint16_t disptext_b_reminder_yoff = 210;
uint16_t disptext_x_reminder_xoff = 165;
uint16_t disptext_x_reminder_yoff = 2;
uint16_t disptext_y_reminder_xoff = 165;
uint16_t disptext_y_reminder_yoff = 210;
uint16_t disptext_mode_xoff = 10;
uint16_t disptext_mode_yoff = 30;
uint16_t disptext_mode_size = 3;
uint16_t disptext_dist_xoff = 10;
uint16_t disptext_dist_yoff = 90;
uint16_t disptext_dist_size = 6;
#else
ST7789 st7789(PicoDisplay::WIDTH, PicoDisplay::HEIGHT, ROTATE_0, false, get_spi_pins(BG_SPI_FRONT));
RGBLED rgbled(PicoDisplay::LED_R, PicoDisplay::LED_G, PicoDisplay::LED_B);
Button button_a(PicoDisplay::A);
Button button_b(PicoDisplay::B);
Button button_x(PicoDisplay::X);
Button button_y(PicoDisplay::Y);
uint16_t disptext_reminder_size = 2;
uint16_t disptext_b_reminder_xoff = 2;
uint16_t disptext_b_reminder_yoff = 110;
uint16_t disptext_x_reminder_xoff = 175;
uint16_t disptext_x_reminder_yoff = 2;
uint16_t disptext_y_reminder_xoff = 175;
uint16_t disptext_y_reminder_yoff = 110;
uint16_t disptext_mode_xoff = 12;
uint16_t disptext_mode_yoff = 15;
uint16_t disptext_mode_size = 3;
uint16_t disptext_dist_xoff = 10;
uint16_t disptext_dist_yoff = 45;
uint16_t disptext_dist_size = 4;
#endif
PicoGraphics_PenRGB332 graphics(st7789.width, st7789.height, nullptr);
uint16_t screen_width = graphics.bounds.w;
uint16_t screen_height = graphics.bounds.h;
#define MM_TO_INCH 25.4
VL53L1X vl53l1x;
const char mode_to_text[4][7] = {
"Auto",
"Short",
"Medium",
"Long"
};
#define FLASH_MOD 20
void flash_led(uint32_t curr_count) {
// Flash the LED based on the current loop counter
// curr_count=0 will turn LED off
#ifndef USE_PICO_EXPLORER
if ((curr_count % FLASH_MOD) < (FLASH_MOD / 2)) {
// value less than half modded number - LED off
rgbled.set_rgb(0, 0, 0);
} else {
// value more than half modded number - LED on
rgbled.set_rgb(128, 128, 128);
}
#endif
}
int main() {
bool vl53_present = false;
uint16_t vl53_mode = 1;
vl53_present = vl53l1x.init();
uint32_t i = 0;
char buf[256];
if (vl53_present) {
vl53l1x.startContinuous(1000);
vl53l1x.setMeasurementTimingBudget(50000);
vl53l1x.setDistanceModeInt(vl53_mode);
}
// The distance (in millimetres)
uint16_t dist = 0;
// True if units in metric, false for Imperial (feet and inches)
bool units_metric = true;
// Whether the display is being held
bool dist_held = false;
Pen WHITE = graphics.create_pen(255, 255, 255);
Pen REDDISH = graphics.create_pen(255, 64, 64);
Pen BG = graphics.create_pen(55, 65, 75);
while(true) {
// bool a_pressed = button_a.read();
bool b_pressed = button_b.read();
bool x_pressed = button_x.read();
bool y_pressed = button_y.read();
if (b_pressed) {
dist_held = !dist_held;
}
if (x_pressed) {
units_metric = !units_metric;
}
if (y_pressed) {
if (vl53_present) {
vl53_mode++;
if (vl53_mode > 3) vl53_mode = 1;
vl53l1x.setDistanceModeInt(vl53_mode);
}
}
Rect text_box(5, 5, screen_width-10, screen_height-10);
graphics.set_pen(BG);
graphics.rectangle(text_box);
// text_box.deflate(10);
graphics.set_clip(text_box);
graphics.set_pen(WHITE);
// Show the current distance
flash_led(0);
if (vl53_present) {
graphics.text("Units",
Point(text_box.x+disptext_x_reminder_xoff,
text_box.y+disptext_x_reminder_yoff), 230, disptext_reminder_size);
graphics.text("+Mode",
Point(text_box.x+disptext_y_reminder_xoff,
text_box.y+disptext_y_reminder_yoff), 230, disptext_reminder_size);
if(dist_held) {
graphics.set_pen(REDDISH);
}
graphics.text("Hold",
Point(text_box.x+disptext_b_reminder_xoff,
text_box.y+disptext_b_reminder_yoff), 230, disptext_reminder_size);
graphics.set_pen(WHITE);
sprintf(buf, "Mode: %s", mode_to_text[vl53_mode]);
graphics.text(buf,
Point(text_box.x+disptext_mode_xoff,
text_box.y+disptext_mode_yoff), 230, disptext_mode_size);
// Get the distance (use previous distance if number is held)
if (!dist_held) dist = vl53l1x.read(false);
if (units_metric) {
sprintf(buf, "%dmm", dist);
} else {
uint16_t ft = ((uint16_t)(dist/MM_TO_INCH))/12;
sprintf(buf, "%dft %.1fin", ft,
((float)dist/MM_TO_INCH)-ft*12.0);
}
graphics.text(buf,
Point(text_box.x+disptext_dist_xoff,
text_box.y+disptext_dist_yoff), 120, disptext_dist_size);
} else {
graphics.text("VL53L1X Missing",
Point(text_box.x+disptext_dist_xoff,
text_box.y+disptext_dist_yoff), 230, disptext_dist_size);
}
graphics.remove_clip();
// update screen
st7789.update(&graphics);
i++;
}
return 0;
}