diff --git a/drivers/icp10125/icp10125.cpp b/drivers/icp10125/icp10125.cpp
index 68e9a087..5a2cf9a3 100644
--- a/drivers/icp10125/icp10125.cpp
+++ b/drivers/icp10125/icp10125.cpp
@@ -75,6 +75,7 @@ namespace pimoroni {
         if(results[2].crc8 != crc8((uint8_t *)&results[2].data, 2)) {result.status = CRC_FAIL; return result;};
 
         int temperature = __bswap16(results[0].data);
+        // Due to all the byte swapping nonsense I'm not sure if I've discarded the LLSB or LMSB here...
         int pressure = ((int32_t)__bswap16(results[1].data) << 8) | (__bswap16(results[2].data >> 8)); // LLSB is discarded
 
         process_data(pressure, temperature, &result.pressure, &result.temperature);
diff --git a/drivers/icp10125/icp10125.hpp b/drivers/icp10125/icp10125.hpp
index 4bd0cee7..ea90b31d 100644
--- a/drivers/icp10125/icp10125.hpp
+++ b/drivers/icp10125/icp10125.hpp
@@ -46,7 +46,7 @@ namespace pimoroni {
 
         bool init();
         int chip_id();
-        bool read_otp();
+        void reset();
         reading measure(meas_command cmd=NORMAL);
 
       private:
@@ -59,8 +59,7 @@ namespace pimoroni {
         const float LUT_upper = 11.5 * (1 << 20);
         const float quadr_factor = 1.0 / 16777216.0;
         const float offst_factor = 2048.0;
-
-        void reset();
+        bool read_otp();
         void process_data(const int p_LSB, const int T_LSB, float *pressure, float *temperature);
         void calculate_conversion_constants(const float *p_Pa, const float *p_LUT, float *out);
         uint8_t crc8(uint8_t *bytes, size_t length, uint8_t polynomial = 0x31);
diff --git a/micropython/examples/breakout_icp10125/normal_demo.py b/micropython/examples/breakout_icp10125/normal_demo.py
new file mode 100644
index 00000000..96adc50e
--- /dev/null
+++ b/micropython/examples/breakout_icp10125/normal_demo.py
@@ -0,0 +1,14 @@
+import time
+
+import breakout_icp10125
+import pimoroni_i2c
+
+i2c = pimoroni_i2c.PimoroniI2C(4, 5)
+
+icp10125 = breakout_icp10125.BreakoutICP10125(i2c)
+
+while True:
+    t, p, status = icp10125.measure(icp10125.NORMAL)
+    if status == icp10125.STATUS_OK:
+        print(t, p)
+    time.sleep(1.0)
diff --git a/micropython/modules/breakout_icp10125/README.md b/micropython/modules/breakout_icp10125/README.md
new file mode 100644
index 00000000..804bbeef
--- /dev/null
+++ b/micropython/modules/breakout_icp10125/README.md
@@ -0,0 +1,89 @@
+# ICP1025 High-accuracy Barometric Pressure & Temperature Sensor <!-- omit in toc -->
+
+The ICP1025 library is intended to drive the TDK InvenSense ICP10125 temperature and pressure sensor.
+
+- [Getting Started](#getting-started)
+- [Taking A Measurement](#taking-a-measurement)
+- [Measurement Types](#measurement-types)
+  - [Normal](#normal)
+  - [Low Power](#low-power)
+  - [Low Noise](#low-noise)
+  - [Ultra Low Noise](#ultra-low-noise)
+
+## Getting Started
+
+Construct a new PimoroniI2C instance for your specific board. Breakout Garden uses pins 4 & 5 and Pico Explorer uses pins 20 & 21.
+
+```python
+import breakout_icp10125
+import pimoroni_i2c
+
+i2c = pimoroni_i2c.PimoroniI2C(4, 5)
+
+icp10125 = breakout_icp10125.BreakoutICP10125(i2c)
+```
+
+## Taking A Measurement
+
+The `measure` method triggers a measurement, blocks for enough time for the measurement to complete, and returns the result as a tuple with three values:
+
+1. Temperature (degrees C)
+2. Pressure (Pa)
+3. Status
+
+If the `status` is `icp10125.STATUS_OK` then the reading is valid. Otherwise you should probably discard it or attempt another reading.
+
+For example, the following code will continuously poll the ICP10125 for `NORMAL` readings and print them out if they are valid:
+
+```python
+import breakout_icp10125
+import pimoroni_i2c
+
+i2c = pimoroni_i2c.PimoroniI2C(4, 5)
+
+icp10125 = breakout_icp10125.BreakoutICP10125(i2c)
+
+while True:
+    t, p, status = icp10125.measure()
+    if status == icp10125.STATUS_OK:
+        print(t, p)
+    time.sleep(1.0)
+```
+
+## Measurement Types
+
+The ICP1025 has eight measurement commands. Four are supported by this library since the remaining four are identical save for the order of Temperature/Pressure data readout being reversed.
+
+Each measurement type has a fixed duration.
+
+### Normal
+
+Normal measurements are the default type, and take 7ms to complete offering a good balance of stability and speed.
+
+```python
+result = icp10125.measure(icp10125.NORMAL)
+```
+
+### Low Power
+
+Low-power measurements take just 2ms and trade stability for speed/power efficiency.
+
+```python
+result = icp10125.measure(icp10125.LOW_POWER)
+```
+
+### Low Noise
+
+Low-noise measurements take 24ms (roughly 3.5x as long as normal) and trade speed for stability.
+
+```python
+result = icp10125.measure(icp10125.LOW_NOISE)
+```
+
+### Ultra Low Noise
+
+Ultra Low-noise measurements take 95ms
+
+```python
+result = icp10125.measure(icp10125.ULTRA_LOW_NOISE)
+```
diff --git a/micropython/modules/breakout_icp10125/breakout_icp10125.c b/micropython/modules/breakout_icp10125/breakout_icp10125.c
new file mode 100644
index 00000000..6c254ffe
--- /dev/null
+++ b/micropython/modules/breakout_icp10125/breakout_icp10125.c
@@ -0,0 +1,54 @@
+#include "breakout_icp10125.h"
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+// BreakoutICP10125 Class
+////////////////////////////////////////////////////////////////////////////////////////////////////
+
+/***** Methods *****/
+MP_DEFINE_CONST_FUN_OBJ_KW(BreakoutICP10125_measure_obj, 1, BreakoutICP10125_measure);
+MP_DEFINE_CONST_FUN_OBJ_1(BreakoutICP10125_soft_reset_obj, BreakoutICP10125_soft_reset);
+
+/***** Binding of Methods *****/
+STATIC const mp_rom_map_elem_t BreakoutICP10125_locals_dict_table[] = {
+    { MP_ROM_QSTR(MP_QSTR_measure), MP_ROM_PTR(&BreakoutICP10125_measure_obj) },
+    { MP_ROM_QSTR(MP_QSTR_soft_reset), MP_ROM_PTR(&BreakoutICP10125_soft_reset_obj) },
+    { MP_ROM_QSTR(MP_QSTR_NORMAL), MP_ROM_INT(NORMAL) },
+    { MP_ROM_QSTR(MP_QSTR_LOW_POWER), MP_ROM_INT(LOW_POWER) },
+    { MP_ROM_QSTR(MP_QSTR_LOW_NOISE), MP_ROM_INT(LOW_NOISE) },
+    { MP_ROM_QSTR(MP_QSTR_ULTRA_LOW_NOISE), MP_ROM_INT(ULTRA_LOW_NOISE) },
+    { MP_ROM_QSTR(MP_QSTR_STATUS_OK), MP_ROM_INT(OK) },
+    { MP_ROM_QSTR(MP_QSTR_STATUS_CRC_FAIL), MP_ROM_INT(CRC_FAIL) },
+};
+STATIC MP_DEFINE_CONST_DICT(BreakoutICP10125_locals_dict, BreakoutICP10125_locals_dict_table);
+
+/***** Class Definition *****/
+const mp_obj_type_t breakout_icp10125_BreakoutICP10125_type = {
+    { &mp_type_type },
+    .name = MP_QSTR_breakout_matrix11x7,
+    .print = BreakoutICP10125_print,
+    .make_new = BreakoutICP10125_make_new,
+    .locals_dict = (mp_obj_dict_t*)&BreakoutICP10125_locals_dict,
+};
+
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+// breakout_icp10125 Module
+////////////////////////////////////////////////////////////////////////////////////////////////////
+
+/***** Globals Table *****/
+STATIC const mp_map_elem_t breakout_icp10125_globals_table[] = {
+    { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_breakout_icp10125) },
+    { MP_OBJ_NEW_QSTR(MP_QSTR_BreakoutICP10125), (mp_obj_t)&breakout_icp10125_BreakoutICP10125_type },
+};
+STATIC MP_DEFINE_CONST_DICT(mp_module_breakout_icp10125_globals, breakout_icp10125_globals_table);
+
+/***** Module Definition *****/
+const mp_obj_module_t breakout_icp10125_user_cmodule = {
+    .base = { &mp_type_module },
+    .globals = (mp_obj_dict_t*)&mp_module_breakout_icp10125_globals,
+};
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+MP_REGISTER_MODULE(MP_QSTR_breakout_icp10125, breakout_icp10125_user_cmodule, MODULE_BREAKOUT_SGP30_ENABLED);
+////////////////////////////////////////////////////////////////////////////////////////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////
\ No newline at end of file
diff --git a/micropython/modules/breakout_icp10125/breakout_icp10125.cpp b/micropython/modules/breakout_icp10125/breakout_icp10125.cpp
new file mode 100644
index 00000000..c02ad8ab
--- /dev/null
+++ b/micropython/modules/breakout_icp10125/breakout_icp10125.cpp
@@ -0,0 +1,95 @@
+#include "drivers/icp10125/icp10125.hpp"
+
+#define MP_OBJ_TO_PTR2(o, t) ((t *)(uintptr_t)(o))
+
+using namespace pimoroni;
+
+extern "C" {
+#include "breakout_icp10125.h"
+#include "pimoroni_i2c.h"
+
+/***** I2C Struct *****/
+typedef struct _PimoroniI2C_obj_t {
+    mp_obj_base_t base;
+    I2C *i2c;
+} _PimoroniI2C_obj_t;
+
+/***** Variables Struct *****/
+typedef struct _breakout_icp10125_BreakoutICP10125_obj_t {
+    mp_obj_base_t base;
+    ICP10125 *breakout;
+} breakout_icp10125_BreakoutICP10125_obj_t;
+
+/***** Print *****/
+void BreakoutICP10125_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) {
+    (void)kind; //Unused input parameter
+    (void)self_in;
+    // breakout_icp10125_BreakoutICP10125_obj_t *self = MP_OBJ_TO_PTR2(self_in, breakout_icp10125_BreakoutICP10125_obj_t);
+    // ICP10125* breakout = self->breakout;
+    // TODO put something useful here? There's no point printing I2C info since that's handled by the I2C object now
+    mp_print_str(print, "BreakoutICP10125()");
+}
+
+/***** Constructor *****/
+mp_obj_t BreakoutICP10125_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *all_args) {
+    breakout_icp10125_BreakoutICP10125_obj_t *self = nullptr;
+
+    enum { ARG_i2c };
+    static const mp_arg_t allowed_args[] = {
+        { MP_QSTR_i2c, MP_ARG_OBJ, {.u_obj = nullptr} }
+    };
+
+    // Parse args.
+    mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
+    mp_arg_parse_all_kw_array(n_args, n_kw, all_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
+
+    // Get I2C bus.
+    if(!MP_OBJ_IS_TYPE(args[ARG_i2c].u_obj, &PimoroniI2C_type)) {
+        mp_raise_ValueError(MP_ERROR_TEXT("BreakoutICP10125: Bad i2C object"));
+        return mp_const_none;
+    }
+
+    _PimoroniI2C_obj_t *i2c = (_PimoroniI2C_obj_t *)MP_OBJ_TO_PTR(args[ARG_i2c].u_obj);
+
+    self = m_new_obj(breakout_icp10125_BreakoutICP10125_obj_t);
+    self->base.type = &breakout_icp10125_BreakoutICP10125_type;
+
+    self->breakout = new ICP10125(i2c->i2c);
+
+    if(!self->breakout->init()) {
+        mp_raise_msg(&mp_type_RuntimeError, "BreakoutICP10125: breakout not found when initialising");
+    }
+
+    return MP_OBJ_FROM_PTR(self);
+}
+
+/***** Methods *****/
+
+mp_obj_t BreakoutICP10125_measure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
+    enum { ARG_self, ARG_command };
+    static const mp_arg_t allowed_args[] = {
+        { MP_QSTR_, MP_ARG_REQUIRED | MP_ARG_OBJ },
+        { MP_QSTR_command, MP_ARG_INT, {.u_int = NORMAL} },
+    };
+
+    mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
+    mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
+
+    breakout_icp10125_BreakoutICP10125_obj_t *self = MP_OBJ_TO_PTR2(args[ARG_self].u_obj, breakout_icp10125_BreakoutICP10125_obj_t);
+    auto reading = self->breakout->measure((ICP10125::meas_command)args[ARG_command].u_int);
+
+    mp_obj_t tuple[3];
+    tuple[0] = mp_obj_new_float(reading.temperature);
+    tuple[1] = mp_obj_new_float(reading.pressure);
+    tuple[2] = mp_obj_new_int(reading.status);
+    return mp_obj_new_tuple(3, tuple);
+}
+
+mp_obj_t BreakoutICP10125_soft_reset(mp_obj_t self_in) {
+    breakout_icp10125_BreakoutICP10125_obj_t *self = MP_OBJ_TO_PTR2(self_in, breakout_icp10125_BreakoutICP10125_obj_t);
+    self->breakout->reset();
+
+    return mp_const_none;
+}
+
+}
\ No newline at end of file
diff --git a/micropython/modules/breakout_icp10125/breakout_icp10125.h b/micropython/modules/breakout_icp10125/breakout_icp10125.h
new file mode 100644
index 00000000..607dfed6
--- /dev/null
+++ b/micropython/modules/breakout_icp10125/breakout_icp10125.h
@@ -0,0 +1,23 @@
+// Include MicroPython API.
+#include "py/runtime.h"
+
+/***** Extern of Class Definition *****/
+extern const mp_obj_type_t breakout_icp10125_BreakoutICP10125_type;
+
+enum meas_command {
+    NORMAL = 0x6825,
+    LOW_POWER = 0x609C,
+    LOW_NOISE = 0x70DF,
+    ULTRA_LOW_NOISE = 0x7866,
+};
+
+enum reading_status {
+    OK = 0,
+    CRC_FAIL = 1,
+};
+
+/***** Extern of Class Methods *****/
+extern void BreakoutICP10125_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind);
+extern mp_obj_t BreakoutICP10125_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *all_args);
+extern mp_obj_t BreakoutICP10125_soft_reset(mp_obj_t self_in);
+extern mp_obj_t BreakoutICP10125_measure(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args);
\ No newline at end of file
diff --git a/micropython/modules/breakout_icp10125/micropython.cmake b/micropython/modules/breakout_icp10125/micropython.cmake
new file mode 100644
index 00000000..3897a67b
--- /dev/null
+++ b/micropython/modules/breakout_icp10125/micropython.cmake
@@ -0,0 +1,19 @@
+set(MOD_NAME breakout_icp10125)
+string(TOUPPER ${MOD_NAME} MOD_NAME_UPPER)
+add_library(usermod_${MOD_NAME} INTERFACE)
+
+target_sources(usermod_${MOD_NAME} INTERFACE
+    ${CMAKE_CURRENT_LIST_DIR}/${MOD_NAME}.c
+    ${CMAKE_CURRENT_LIST_DIR}/${MOD_NAME}.cpp
+    ${CMAKE_CURRENT_LIST_DIR}/../../../drivers/icp10125/icp10125.cpp
+)
+
+target_include_directories(usermod_${MOD_NAME} INTERFACE
+    ${CMAKE_CURRENT_LIST_DIR}
+)
+
+target_compile_definitions(usermod_${MOD_NAME} INTERFACE
+    -DMODULE_${MOD_NAME_UPPER}_ENABLED=1
+)
+
+target_link_libraries(usermod INTERFACE usermod_${MOD_NAME})
\ No newline at end of file
diff --git a/micropython/modules/micropython.cmake b/micropython/modules/micropython.cmake
index 30044027..4ddde4cc 100644
--- a/micropython/modules/micropython.cmake
+++ b/micropython/modules/micropython.cmake
@@ -25,6 +25,7 @@ include(breakout_bh1745/micropython)
 include(breakout_bme68x/micropython)
 include(breakout_bme280/micropython)
 include(breakout_bmp280/micropython)
+include(breakout_icp10125/micropython)
 
 include(pico_scroll/micropython)
 include(pico_rgb_keypad/micropython)