mirror
/
pico-tracker
kopia lustrzana https://github.com/bristol-seds/pico-tracker
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Wykres commitów

  • 7db3a53951 [aprs-tools] bugfix: use correct telemetry length when extracting backlog main-solar-only Richard Meadows 2016-08-19 16:31:47 +0100
  • 2b07ebd965 [cold-out] fix COLD_OUT_BATTERY_V not doing anything Richard Meadows 2016-08-18 08:15:25 +0100
  • 662ed90324 [ubseds18] telemetry strings Richard Meadows 2016-08-16 19:53:17 +0100
  • 54f313ed3e [ubseds18] config changes Richard Meadows 2016-08-16 19:52:52 +0100
  • f105547daf [gps_ubx] only output date if locked Richard Meadows 2016-08-16 18:34:52 +0100
  • af11c47696 ditch 300 baud RTTY, don't want to waste power on it Richard Meadows 2016-08-16 11:55:40 +0100
  • 5b0905a61d [cold-out] add cold out option based on battery voltage Richard Meadows 2016-08-16 00:26:48 +0100
  • 4f7547f54f [gps_osp] re-enable GPS re-inits, with a longer timeout period Richard Meadows 2016-08-13 20:10:04 +0100
  • 8e7b03432c [gps_osp] never try to re-init, just go straight to the watchdog Richard Meadows 2016-08-13 19:20:03 +0100
  • fec29b7b4b [gps_osp] make ON_OFF signal longer Richard Meadows 2016-08-13 19:19:41 +0100
  • db0ec50254 [aprs tools] rename 'solar' field as 'bus' so it's the same as telemetry Richard Meadows 2016-08-13 19:19:04 +0100
  • 1e67f5503a [gps_osp] set month correctly Richard Meadows 2016-08-13 19:16:10 +0100
  • 61d00df6bb [Makefile] add loader command for programming loader Richard Meadows 2016-08-13 18:00:41 +0100
  • f6a1cf8320 [gps_osp] actually fix startup delay Richard Meadows 2016-08-13 18:00:17 +0100
  • 18aa7396c9 [battery] only wait half an hour before starting charging Richard Meadows 2016-08-13 16:54:34 +0100
  • 0e4c536da5 [gps_osp] fix startup delay Richard Meadows 2016-08-13 16:54:10 +0100
  • cc5a52fe86 [ubseds17] set night time cycle to once every 3 minutes, so night-time ARISS is once every 6 Richard Meadows 2016-08-13 13:05:12 +0100
  • 76c44fe19c [pre-flight.md] changes to pre-flight instruction for callsign.h Richard Meadows 2016-08-13 12:55:51 +0100
  • 982051ad64 [sequencer] tidy Richard Meadows 2016-08-13 12:54:54 +0100
  • bd5d31517d [thermistor_equation] fix testcase Richard Meadows 2016-08-13 12:25:13 +0100
  • 1843b020a5 [aprs] deviation changes based on zone, but always use 5kHz for ARISS Richard Meadows 2016-08-13 12:07:45 +0100
  • 35f2ecacfc [rtc] simplify since_aprs Richard Meadows 2016-08-13 11:46:15 +0100
  • f59c70ef4f [ubseds17] start preparations for ubseds17, with ariss Richard Meadows 2016-08-13 00:48:02 +0100
  • a11af1bdb5 [aprs] make path strings const Richard Meadows 2016-08-13 00:44:18 +0100
  • 0f9ba452f2 [flash status] transfer flash status from bootloader to application using random RAM location Richard Meadows 2016-08-12 22:33:54 +0100
  • f9fad06c80 build everything except tests with -O1 Richard Meadows 2016-08-12 22:30:47 +0100
  • 3d05e91947 [makefile] add option in config.mk to include test stubs in build Richard Meadows 2016-08-12 22:29:40 +0100
  • 73d18dc2ad add __NOPs to stop dodgy busy-wait loops being optimised out0 Richard Meadows 2016-08-12 22:27:35 +0100
  • 0948a84e08 [loader] remove build product from git Richard Meadows 2016-08-12 20:10:05 +0100
  • d8d09fc960 [loader] add testcase for loader, but disable testcases from loader build Richard Meadows 2016-08-12 20:08:28 +0100
  • 06bf01b3a5 split callsigns into a separate file Richard Meadows 2016-08-07 12:32:08 +0100
  • 0d63bc3e06 [low-power-solar] add values for rx section Richard Meadows 2016-08-07 11:58:01 +0100
  • 83aa5cae0f [aprs_daemon] be less selective with aprs-is filters Richard Meadows 2016-08-07 11:51:02 +0100
  • 35b4343573 [geofence] make arrays of pointers const Richard Meadows 2016-08-07 10:25:08 +0100
  • d64bba5b43 [linker] fix linker in no-bootloader mode Richard Meadows 2016-08-06 20:31:45 +0100
  • 7e7dbc10ae [loader] initial fix of flash checking Richard Meadows 2016-08-05 19:07:23 +0100
  • 91bfcb9d58 [loader] initial implementation of flash checking Richard Meadows 2016-08-05 16:10:39 +0100
  • d7e28bed26 [memory] tidy Richard Meadows 2016-08-05 16:04:28 +0100
  • 396de997dd [memory] access 16k eeprom area by pointer, don't specifically allocate it Richard Meadows 2016-08-05 16:04:13 +0100
  • 1415b6488b [backlog] fix backlog for flash Richard Meadows 2016-08-05 15:37:21 +0100
  • 02f71ee407 [loader] add option for bootloader Richard Meadows 2016-08-04 20:16:34 +0100
  • e5f185b934 [loader] initial commit of bootloader Richard Meadows 2016-08-04 18:09:21 +0100
  • 8eb8a328f0 [ms5607] fix delay function Richard Meadows 2016-08-04 17:27:01 +0100
  • f6c1fcaab1 [xosc] spelling Richard Meadows 2016-08-04 17:26:43 +0100
  • eba62ba245 [memory] allocate separate 16k eeprom area Richard Meadows 2016-08-04 14:32:57 +0100
  • a44086db16 [gps_ubx] wait at most 5 seconds for gps_ubx Richard Meadows 2016-08-04 12:32:19 +0100
  • 48dfd906e2 [rtc] external getter for ticks Richard Meadows 2016-08-04 12:31:49 +0100
  • 9f1c5ecc56 [gps_ubx] fixes for -O1 Richard Meadows 2016-08-04 12:26:21 +0100
  • ef3df16126 [ubseds_emf] next flight hw Richard Meadows 2016-08-04 12:16:06 +0100
  • 7505efd54c [gps_ubx] improve polling functions, use GPS_MAXIDLE, tidy indent Richard Meadows 2016-08-04 12:15:34 +0100
  • d29d7f8176 [geofence] prefix Richard Meadows 2016-08-03 21:42:53 +0100
  • 4f3d5ef714 [rtty] 300 baud Richard Meadows 2016-08-02 23:00:43 +0100
  • 0412146a06 [geofence] reduce the prefix geofence to 20km resolution, cut out much of the southern hemisphere Richard Meadows 2016-08-02 19:43:27 +0100
  • 1e7d8eccd1 strip pointless assert, saves about 6K flash Richard Meadows 2016-08-02 18:57:45 +0100
  • ce310d89c6 [geofence] use 16-bit values for lat and long, this gives ~1km resolution which is plenty Richard Meadows 2016-08-02 18:18:30 +0100
  • b7d8c1d302 [solar-only] new hwconfig for solar only Richard Meadows 2016-08-02 16:17:49 +0100
  • 15443d917c [gps_ubx] fix months in date field Richard Meadows 2016-08-02 16:13:25 +0100
  • 82e771271c [gps_ubx] fix watchdog timings for gps_ubx Richard Meadows 2016-07-30 13:57:40 +0100
  • dd4e6c8076 [flash] add checksum status to telemetry Richard Meadows 2016-07-30 12:42:28 +0100
  • abcd27912b [flash] add flash checksum checks Richard Meadows 2016-07-30 12:41:29 +0100
  • 630a03b8ce [telemetry] reduce RAM usage, number of characters is limited by transmission time anyhow Richard Meadows 2016-07-30 12:40:52 +0100
  • 56e19cebd0 tidy compiler warnings Richard Meadows 2016-07-30 12:39:55 +0100
  • 8c974d7abb [main-aaa-uhf] set correct battery channel Richard Meadows 2016-07-29 23:00:44 +0100
  • 2766c2c952 [ubseds16] set cycle time to always be 30 seconds Richard Meadows 2016-07-29 11:25:23 +0100
  • dc447a7150 [measure_xosc] don't set power mode to standby for measure_xosc Richard Meadows 2016-07-29 11:17:26 +0100
  • bc24e3d58e [rtc] run at cycle time Richard Meadows 2016-07-29 11:09:15 +0100
  • a333c49dbf [gps_ubx] wait for gps_ubx Richard Meadows 2016-07-29 10:50:43 +0100
  • 849798e2c0 [gps] have one gps_t shared between all GPSs Richard Meadows 2016-07-29 10:49:43 +0100
  • f41936c8de [ubseds16] set callsign, telemetry format Richard Meadows 2016-07-18 18:10:32 +0100
  • 638aae26bd [si_trx] set radio part number from HW_CONFIG Richard Meadows 2016-07-18 18:08:04 +0100
  • 13848c8605 [gps-ubx] update so it builds. TODO: test Richard Meadows 2016-07-17 19:55:20 +0100
  • a4993cd06f [measure-xosc] when in use Richard Meadows 2016-07-17 19:53:23 +0100
  • 1072b27530 [cold-out] only when in use Richard Meadows 2016-07-17 19:53:01 +0100
  • 81ed29b903 [ariss[ only when arris in use Richard Meadows 2016-07-17 19:52:47 +0100
  • 362e96fd55 [backlog] only when backlog in use Richard Meadows 2016-07-17 19:52:17 +0100
  • bc625f9778 [pressure-temperature] only when baro in use Richard Meadows 2016-07-17 19:51:45 +0100
  • 17e92681c9 [geofence] defines to save space when not in use TODO add these in python Richard Meadows 2016-07-17 19:51:31 +0100
  • f5af7a41db [main-aaa-uhf] add new hwconfig for main-aaa board, add various options Richard Meadows 2016-07-17 19:50:51 +0100
  • 8dc241b512 [memory] use internal flash for backlog Richard Meadows 2016-07-16 20:38:29 +0100
  • f75b383e34 [telemetry] add option to set APRS deviation Richard Meadows 2016-07-16 20:06:35 +0100
  • bba8c7d2f7 [geofence] add nordics to APRS, move from telemetry positive to telemetery negative Richard Meadows 2016-07-16 20:04:14 +0100
  • fce758e6ab [sequencer] change timings for continous transmission Richard Meadows 2016-07-16 20:02:34 +0100
  • 8ef9d7b59f [main] use local variable correctly in `format_telemetry_string` Richard Meadows 2016-07-11 23:21:23 +0100
  • e861da229f [bugfix] fix days_in_month, add epoch calculation for se880 GPS Richard Meadows 2016-07-01 11:00:09 +0100
  • 328ac8ed92 [0.96] firmware release suitable for v0.96 hardware - as used on UBSEDS6 and UBSEDS8 v0.96 Richard Meadows 2016-06-30 18:09:12 +0100
  • f082c49d77 [aprs-tools] raw_parser, add option for dummy run, and colours Richard Meadows 2016-06-02 11:35:58 +0100
  • 233a1a5533 [aprs-tools] bugfix for backlog for the 31st of the previous month Richard Meadows 2016-06-02 11:35:32 +0100
  • 9d0c02835e [ubseds16] update battery charging test Richard Meadows 2016-05-07 15:28:04 +0100
  • ec6b4831ef [aprs,tools] specifiy exact callsigns in daemon filters to remove cruft Richard Meadows 2016-05-07 11:49:02 +0100
  • 00bdda7e2d [aprs,tools] bugfix, make it work Richard Meadows 2016-05-07 11:47:54 +0100
  • 0bd01e5c6b [aprs,equations] fix mis-aligned damn you python whitespace Richard Meadows 2016-04-30 12:06:33 +0100
  • 35bbca5629 [ubseds15] cold out to -70, allow gps to run for a day without reset, add deathwish Richard Meadows 2016-04-29 12:27:27 +0100
  • 0c9ecf4dc6 [tools,aprs] add aprs test upload tool Richard Meadows 2016-04-27 10:21:39 +0100
  • 69ef134409 [xosc] always _enable_ external tcxo when enabling hf clock Richard Meadows 2016-04-27 10:04:09 +0100
  • 4a54e7f0ab [hibernate time] set hibernate time to end of transmission minus 20 seconds Richard Meadows 2016-04-26 09:52:24 +0100
  • b40edf0627 [battery] add trickle charging state for when solar cannot sustain both charging and operations, but can add some useful power anyhow Richard Meadows 2016-04-26 09:47:02 +0100
  • 7b985a2593 [battery] move battery update to the end of the sequence Richard Meadows 2016-04-26 09:16:16 +0100
  • 4aa377c269 [battery] only reset the execess hysterisis after N consecutive discharge cycles Richard Meadows 2016-04-25 09:39:26 +0100
  • 521bb1e848 [rf-tests] tidy Richard Meadows 2016-04-24 19:59:14 +0100
  • c13e5bd0ea [ariss] don't use predict, just try ariss 1-in-4 times when there's power Richard Meadows 2016-04-24 19:55:58 +0100