67 wiersze
3.2 KiB
C
67 wiersze
3.2 KiB
C
// Tracker for LoRA APRS Header for configuration
|
|
//
|
|
// TTGO T-Beam includes GPS module + optional DHT22 (not yet DONE)
|
|
//
|
|
// can be used as tracker only, tracker plus weather reports (temperature and humidity) or weather reports station only
|
|
//
|
|
// updated from OE1ACM sketch by OE3CJB to enable WX data to be sent via LoRa APRS.
|
|
// one package is with position and battery voltage
|
|
// the next is with weather data in APRS format
|
|
//
|
|
// licensed under CC BY-NC-SA
|
|
//
|
|
// version: V1.3
|
|
// last update: 27.08.2020
|
|
// change history
|
|
// symbol RV added
|
|
// compressed packets in tracker mode (base91)
|
|
//
|
|
// version: V1.1beta
|
|
// last update: 22.11.2019
|
|
//
|
|
// change history
|
|
// version V1.0
|
|
// added HW Version V1.0 support
|
|
// added presetting in the header TTGO...config.h to prevent long initial setup at first boot up
|
|
// added "SPACE" to allowed letters for callsign for shorter callsigns - has to be added at the end
|
|
// added smart beaconing
|
|
//
|
|
// version V1.2
|
|
// first released version
|
|
|
|
// SET HW version
|
|
#define T_BEAM_V1_0 // use this for newer Boards AKA Rev1 (second board release)
|
|
// #define T_BEAM_V0_7 // use this for older Boards AKA Rev0.x (first board release)
|
|
|
|
// SET temperature sensor type
|
|
// #define DS18B20 // use this if you use DS18B20, default is DHT22
|
|
// #define USE_BME280 // use this if you use BME280,m default is DHT22
|
|
|
|
// USER DATA - USE THESE LINES TO MODIFY YOUR PREFERENCES
|
|
// IF NOT CHANGED you have to go through the configuration routine at first boot up of the TTGO T-Beam
|
|
|
|
// #define DONT_USE_FLASH_MEMORY // uncomment if you don't want to use Flashmemory - instead data below must be corrected
|
|
#define TRACKERMODE 0 // preset MODE here, if flash not used >> 0=TRACKER, 1=WX_TRACKER, 2=WX_MOVE, 3=WX_FIXED
|
|
#define CALLSIGN "XX9XXX-11" // enter your callsign here - less then 6 letter callsigns please add "spaces" so total length is 6 (without SSID)
|
|
#define WX_CALLSIGN "XX9XXX-11" // use same callsign but you can use different SSID
|
|
#define LONGITUDE_PRESET "01539.85E" // please in APRS notation DDDMM.mmE or DDDMM.mmW
|
|
#define LATIDUDE_PRESET "4813.62N" // please in APRS notation DDMM.mmN or DDMM.mmS
|
|
#define APRS_SYMBOL ">" // other symbols are
|
|
// "_" => Weather Station
|
|
// ">" => CAR
|
|
// "[" => RUNNER
|
|
// "b" => BICYCLE
|
|
// "<" => MOTORCYCLE
|
|
// "R" => Recreation Vehicle
|
|
// #define HW_COMMENT // send Alt und Battery Voltage, UNcomment if don't want to send it
|
|
#define MY_COMMENT "" // add your coment here - if empty then no comment is sent
|
|
// #define MY_COMMENT "TTGO by OE3CJB" // add your coment here - if empty then no comment is sent
|
|
|
|
// TRANSMIT INTERVAL
|
|
unsigned long max_time_to_nextTX = 180000L; // set here MAXIMUM time in ms(!) for smart beaconing - minimum time is always 1 min = 60 secs = 60000L !!!
|
|
// when entering 60000L intervall is fixed to 1 min
|
|
|
|
// show RX values
|
|
// #define SHOW_RX_PACKET // uncomment to show received LoRa APS packets for the time given below
|
|
#define SHOW_RX_TIME 5000 // show RX packet for milliseconds (5000 = 5secs)
|