micropython/minimal
Damien George b0599de48e minimal: Update frozentest.mpy file for new .mpy version. 2017-02-17 10:27:47 +11:00
..
Makefile minimal/Makefile: Split rule for firmware.bin generation. 2016-10-22 22:01:44 +03:00
README.md minimal: Add enough code to run minimal build on STM32F4xx hardware. 2016-01-07 17:43:07 +00:00
frozentest.mpy minimal: Update frozentest.mpy file for new .mpy version. 2017-02-17 10:27:47 +11:00
frozentest.py minimal: Add example of frozen persistent bytecode (.mpy file). 2016-04-13 16:07:47 +01:00
main.c minimal: Add enough code to run minimal build on STM32F4xx hardware. 2016-01-07 17:43:07 +00:00
mpconfigport.h py: Be more specific with MP_DECLARE_CONST_FUN_OBJ macros. 2016-10-21 16:26:01 +11:00
mphalport.h all: Add py/mphal.h and use it in all ports. 2015-10-31 19:14:30 +03:00
qstrdefsport.h minimal: New port, intended to represent minimal working code. 2015-01-13 03:17:47 +02:00
stm32f405.ld minimal: Add enough code to run minimal build on STM32F4xx hardware. 2016-01-07 17:43:07 +00:00
uart_core.c minimal: Add enough code to run minimal build on STM32F4xx hardware. 2016-01-07 17:43:07 +00:00

README.md

The minimal port

This port is intended to be a minimal MicroPython port that actually runs. It can run under Linux (or similar) and on any STM32F4xx MCU (eg the pyboard).

Building and running Linux version

By default the port will be built for the host machine:

$ make

To run a small test script do:

$ make run

Building for an STM32 MCU

The Makefile has the ability to build for a Cortex-M CPU, and by default includes some start-up code for an STM32F4xx MCU and also enables a UART for communication. To build:

$ make CROSS=1

If you previously built the Linux version, you will need to first run make clean to get rid of incompatible object files.

Building will produce the build/firmware.dfu file which can be programmed to an MCU using:

$ make CROSS=1 deploy

This version of the build will work out-of-the-box on a pyboard (and anything similar), and will give you a MicroPython REPL on UART1 at 9600 baud. Pin PA13 will also be driven high, and this turns on the red LED on the pyboard.