mirror
/
micropython
kopia lustrzana https://github.com/micropython/micropython
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
micropython/stmhal/rtc.c

303 wiersze
9.2 KiB
C
Czysty Wina Historia

#include <stdio.h>
#include "stm32f4xx_hal.h"
#include "misc.h"
#include "mpconfig.h"
#include "qstr.h"
#include "obj.h"
#include "runtime.h"
//#include "systick.h"
#include "rtc.h"
RTC_HandleTypeDef RTCHandle;
static machine_uint_t rtc_info;
#define RTC_INFO_USE_EXISTING (0)
#define RTC_INFO_USE_LSE (1)
#define RTC_INFO_USE_LSI (3)
// Note: LSI is around (32KHz), these dividers should work either way
// ck_spre(1Hz) = RTCCLK(LSE) /(uwAsynchPrediv + 1)*(uwSynchPrediv + 1)
#define RTC_ASYNCH_PREDIV (0x7f)
#define RTC_SYNCH_PREDIV (0x00ff)
#if 0
void rtc_init(void) {
// Enable the PWR clock
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
// Allow access to RTC
PWR_BackupAccessCmd(ENABLE);
if (RTC_ReadBackupRegister(RTC_BKP_DR0) == 0x32F2) {
// RTC still alive, so don't re-init it
// wait for RTC APB register synchronisation
RTC_WaitForSynchro();
rtc_info = RTC_INFO_USE_EXISTING;
return;
}
uint32_t timeout = 10000000;
// Enable the PWR clock
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
// Allow access to RTC
PWR_BackupAccessCmd(ENABLE);
// Enable the LSE OSC
RCC_LSEConfig(RCC_LSE_ON);
// Wait till LSE is ready
machine_uint_t sys_tick = sys_tick_counter;
while((RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) && (--timeout > 0)) {
}
// record how long it took for the RTC to start up
rtc_info = (sys_tick_counter - sys_tick) << 2;
// If LSE timed out, use LSI instead
if (timeout == 0) {
// Disable the LSE OSC
RCC_LSEConfig(RCC_LSE_OFF);
// Enable the LSI OSC
RCC_LSICmd(ENABLE);
// Wait till LSI is ready
while(RCC_GetFlagStatus(RCC_FLAG_LSIRDY) == RESET) {
}
// Use LSI as the RTC Clock Source
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSI);
// record that we are using the LSI
rtc_info |= RTC_INFO_USE_LSI;
} else {
// Use LSE as the RTC Clock Source
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
// record that we are using the LSE
rtc_info |= RTC_INFO_USE_LSE;
}
// Note: LSI is around (32KHz), these dividers should work either way
// ck_spre(1Hz) = RTCCLK(LSE) /(uwAsynchPrediv + 1)*(uwSynchPrediv + 1)
uint32_t uwSynchPrediv = 0xFF;
uint32_t uwAsynchPrediv = 0x7F;
// Enable the RTC Clock
RCC_RTCCLKCmd(ENABLE);
// Wait for RTC APB registers synchronisation
RTC_WaitForSynchro();
// Configure the RTC data register and RTC prescaler
RTC_InitTypeDef RTC_InitStructure;
RTC_InitStructure.RTC_AsynchPrediv = uwAsynchPrediv;
RTC_InitStructure.RTC_SynchPrediv = uwSynchPrediv;
RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;
RTC_Init(&RTC_InitStructure);
// Set the date (BCD)
RTC_DateTypeDef RTC_DateStructure;
RTC_DateStructure.RTC_Year = 0x13;
RTC_DateStructure.RTC_Month = RTC_Month_October;
RTC_DateStructure.RTC_Date = 0x26;
RTC_DateStructure.RTC_WeekDay = RTC_Weekday_Saturday;
RTC_SetDate(RTC_Format_BCD, &RTC_DateStructure);
// Set the time (BCD)
RTC_TimeTypeDef RTC_TimeStructure;
RTC_TimeStructure.RTC_H12 = RTC_H12_AM;
RTC_TimeStructure.RTC_Hours = 0x01;
RTC_TimeStructure.RTC_Minutes = 0x53;
RTC_TimeStructure.RTC_Seconds = 0x00;
RTC_SetTime(RTC_Format_BCD, &RTC_TimeStructure);
// Indicator for the RTC configuration
RTC_WriteBackupRegister(RTC_BKP_DR0, 0x32F2);
}
#endif
static void RTC_CalendarConfig(void);
void rtc_init(void) {
/*##-1- Configure the RTC peripheral #######################################*/
RTCHandle.Instance = RTC;
/* Configure RTC prescaler and RTC data registers */
/* RTC configured as follow:
- Hour Format = Format 24
- Asynch Prediv = Value according to source clock
- Synch Prediv = Value according to source clock
- OutPut = Output Disable
- OutPutPolarity = High Polarity
- OutPutType = Open Drain */
RTCHandle.Init.HourFormat = RTC_HOURFORMAT_24;
RTCHandle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV;
RTCHandle.Init.SynchPrediv = RTC_SYNCH_PREDIV;
RTCHandle.Init.OutPut = RTC_OUTPUT_DISABLE;
RTCHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
RTCHandle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
machine_uint_t tick = HAL_GetTick();
if(HAL_RTC_Init(&RTCHandle) != HAL_OK)
{
/* Initialization Error */
//Error_Handler();
return;
}
// record how long it took for the RTC to start up
rtc_info = HAL_GetTick() - tick;
/*##-2- Check if Data stored in BackUp register0: No Need to reconfigure RTC#*/
/* Read the Back Up Register 0 Data */
if(HAL_RTCEx_BKUPRead(&RTCHandle, RTC_BKP_DR0) != 0x32F2)
{
/* Configure RTC Calendar */
RTC_CalendarConfig();
}
else
{
/* Check if the Power On Reset flag is set */
if(__HAL_RCC_GET_FLAG(RCC_FLAG_PORRST) != RESET)
{
/* Turn on LED2: Power on reset occured */
//BSP_LED_On(LED2);
}
/* Check if Pin Reset flag is set */
if(__HAL_RCC_GET_FLAG(RCC_FLAG_PINRST) != RESET)
{
/* Turn on LED4: External reset occured */
//BSP_LED_On(LED4);
}
/* Clear source Reset Flag */
__HAL_RCC_CLEAR_RESET_FLAGS();
}
}
static void RTC_CalendarConfig(void)
{
RTC_DateTypeDef sdatestructure;
RTC_TimeTypeDef stimestructure;
/*##-1- Configure the Date #################################################*/
/* Set Date: Tuesday February 18th 2014 */
sdatestructure.Year = 0x14;
sdatestructure.Month = RTC_MONTH_FEBRUARY;
sdatestructure.Date = 0x18;
sdatestructure.WeekDay = RTC_WEEKDAY_TUESDAY;
if(HAL_RTC_SetDate(&RTCHandle,&sdatestructure,FORMAT_BCD) != HAL_OK)
{
/* Initialization Error */
//Error_Handler();
return;
}
/*##-2- Configure the Time #################################################*/
/* Set Time: 02:00:00 */
stimestructure.Hours = 0x02;
stimestructure.Minutes = 0x00;
stimestructure.Seconds = 0x00;
stimestructure.TimeFormat = RTC_HOURFORMAT12_AM;
stimestructure.DayLightSaving = RTC_DAYLIGHTSAVING_NONE ;
stimestructure.StoreOperation = RTC_STOREOPERATION_RESET;
if(HAL_RTC_SetTime(&RTCHandle,&stimestructure,FORMAT_BCD) != HAL_OK)
{
/* Initialization Error */
//Error_Handler();
return;
}
/*##-3- Writes a data in a RTC Backup data Register0 #######################*/
HAL_RTCEx_BKUPWrite(&RTCHandle,RTC_BKP_DR0,0x32F2);
}
/******************************************************************************/
// Micro Python bindings
typedef struct _pyb_rtc_obj_t {
mp_obj_base_t base;
} pyb_rtc_obj_t;
STATIC const pyb_rtc_obj_t pyb_rtc_obj = {{&pyb_rtc_type}};
STATIC mp_obj_t pyb_rtc_make_new(mp_obj_t type_in, uint n_args, uint n_kw, const mp_obj_t *args) {
// check arguments
mp_arg_check_num(n_args, n_kw, 0, 0, false);
// return constant object
return (mp_obj_t)&pyb_rtc_obj;
}
mp_obj_t pyb_rtc_info(mp_obj_t self_in) {
return mp_obj_new_int(rtc_info);
}
MP_DEFINE_CONST_FUN_OBJ_1(pyb_rtc_info_obj, pyb_rtc_info);
mp_obj_t pyb_rtc_datetime(uint n_args, const mp_obj_t *args) {
if (n_args == 1) {
// get date and time
// note: need to call get time then get date to correctly access the registers
RTC_DateTypeDef date;
RTC_TimeTypeDef time;
HAL_RTC_GetTime(&RTCHandle, &time, FORMAT_BIN);
HAL_RTC_GetDate(&RTCHandle, &date, FORMAT_BIN);
mp_obj_t tuple[8] = {
mp_obj_new_int(2000 + date.Year),
mp_obj_new_int(date.Month),
mp_obj_new_int(date.Date),
mp_obj_new_int(date.WeekDay),
mp_obj_new_int(time.Hours),
mp_obj_new_int(time.Minutes),
mp_obj_new_int(time.Seconds),
mp_obj_new_int(time.SubSeconds),
};
return mp_obj_new_tuple(8, tuple);
} else {
// set date and time
mp_obj_t *items;
mp_obj_get_array_fixed_n(args[1], 8, &items);
RTC_DateTypeDef date;
date.Year = mp_obj_get_int(items[0]) - 2000;
date.Month = mp_obj_get_int(items[1]);
date.Date = mp_obj_get_int(items[2]);
date.WeekDay = mp_obj_get_int(items[3]);
HAL_RTC_SetDate(&RTCHandle, &date, FORMAT_BCD);
RTC_TimeTypeDef time;
time.Hours = mp_obj_get_int(items[4]);
time.Minutes = mp_obj_get_int(items[5]);
time.Seconds = mp_obj_get_int(items[6]);
time.SubSeconds = mp_obj_get_int(items[7]);
time.TimeFormat = RTC_HOURFORMAT12_AM;
time.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
time.StoreOperation = RTC_STOREOPERATION_SET;
HAL_RTC_SetTime(&RTCHandle, &time, FORMAT_BCD);
return mp_const_none;
}
}
MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pyb_rtc_datetime_obj, 1, 2, pyb_rtc_datetime);
STATIC const mp_map_elem_t pyb_rtc_locals_dict_table[] = {
{ MP_OBJ_NEW_QSTR(MP_QSTR_info), (mp_obj_t)&pyb_rtc_info_obj },
{ MP_OBJ_NEW_QSTR(MP_QSTR_datetime), (mp_obj_t)&pyb_rtc_datetime_obj },
};
STATIC MP_DEFINE_CONST_DICT(pyb_rtc_locals_dict, pyb_rtc_locals_dict_table);
const mp_obj_type_t pyb_rtc_type = {
{ &mp_type_type },
.name = MP_QSTR_RTC,
.make_new = pyb_rtc_make_new,
.locals_dict = (mp_obj_t)&pyb_rtc_locals_dict,
};
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik