micropython/py
Maarten van der Schrieck 3bca93b2d0 ports: Fix sys.stdout.buffer.write() return value.
MicroPython code may rely on the return value of sys.stdout.buffer.write()
to reflect the number of bytes actually written. While in most scenarios a
write() operation is successful, there are cases where it fails, leading to
data loss. This problem arises because, currently, write() merely returns
the number of bytes it was supposed to write, without indication of
failure.

One scenario where write() might fail, is where USB is used and the
receiving end doesn't read quickly enough to empty the receive buffer. In
that case, write() on the MicroPython side can timeout, resulting in the
loss of data without any indication, a behavior observed notably in
communication between a Pi Pico as a client and a Linux host using the ACM
driver.

A complex issue arises with mp_hal_stdout_tx_strn() when it involves
multiple outputs, such as USB, dupterm and hardware UART. The challenge is
in handling cases where writing to one output is successful, but another
fails, either fully or partially. This patch implements the following
solution:

mp_hal_stdout_tx_strn() attempts to write len bytes to all of the possible
destinations for that data, and returns the minimum successful write
length.

The implementation of this is complicated by several factors:
- multiple outputs may be enabled or disabled at compiled time
- multiple outputs may be enabled or disabled at runtime
- mp_os_dupterm_tx_strn() is one such output, optionally containing
  multiple additional outputs
- each of these outputs may or may not be able to report success
- each of these outputs may or may not be able to report partial writes

As a result, there's no single strategy that fits all ports, necessitating
unique logic for each instance of mp_hal_stdout_tx_strn().

Note that addressing sys.stdout.write() is more complex due to its data
modification process ("cooked" output), and it remains unchanged in this
patch. Developers who are concerned about accurate return values from
write operations should use sys.stdout.buffer.write().

This patch might disrupt some existing code, but it's also expected to
resolve issues, considering that the peculiar return value behavior of
sys.stdout.buffer.write() is not well-documented and likely not widely
known. Therefore, it's improbable that much existing code relies on the
previous behavior.

Signed-off-by: Maarten van der Schrieck <maarten@thingsconnected.nl>
2023-12-22 10:32:46 +11:00
..
argcheck.c py: Remove the word "yet" from exception messages. 2022-12-06 13:34:52 +11:00
asmarm.c py/asmarm: Add asm_arm_ldrh_reg_reg_offset() helper func. 2022-05-23 14:21:16 +10:00
asmarm.h py/asm{arm,thumb,x64,x86,xtensa}: Remove unused macros. 2023-10-27 15:41:02 +11:00
asmbase.c all: Fix spelling mistakes based on codespell check. 2023-04-27 18:03:06 +10:00
asmbase.h py/emit: Suppress unreachable bytecode/native code that follows jump. 2022-06-20 22:28:18 +10:00
asmthumb.c all: Fix spelling mistakes based on codespell check. 2023-04-27 18:03:06 +10:00
asmthumb.h py/asm{arm,thumb,x64,x86,xtensa}: Remove unused macros. 2023-10-27 15:41:02 +11:00
asmx64.c py/asmx64: Support full range of regs in asm_x64_lea_disp_to_r64. 2022-05-17 14:25:51 +10:00
asmx64.h py/asm{arm,thumb,x64,x86,xtensa}: Remove unused macros. 2023-10-27 15:41:02 +11:00
asmx86.c py/asm: Add funcs/macros to emit machine code for logical-shift-right. 2020-06-27 00:24:04 +10:00
asmx86.h py/asm{arm,thumb,x64,x86,xtensa}: Remove unused macros. 2023-10-27 15:41:02 +11:00
asmxtensa.c py/asmxtensa: Fix use of l32i/s32i when offset won't fit in encoding. 2022-03-30 16:32:17 +11:00
asmxtensa.h py/asm{arm,thumb,x64,x86,xtensa}: Remove unused macros. 2023-10-27 15:41:02 +11:00
bc.c py/bc: Fix checking for duplicate **kwargs. 2022-11-28 11:23:22 +11:00
bc.h py: Pass in address to compiled module instead of returning it. 2022-12-08 12:27:23 +11:00
bc0.h py: Change jump-if-x-or-pop opcodes to have unsigned offset argument. 2022-03-28 15:43:09 +11:00
binary.c py: Clean up formatting of union definitions. 2022-08-23 13:09:57 +10:00
binary.h py/binary: Change mp_uint_t to size_t for index, size, align args. 2019-09-02 13:14:27 +10:00
builtin.h py/makemoduledefs.py: Automatically declare delegation attr functions. 2023-06-14 19:03:46 +10:00
builtinevex.c py/builtinevex: Handle invalid filenames for execfile. 2023-10-12 15:17:59 +11:00
builtinhelp.c py/objmodule: Add a table of built-in modules with delegation. 2023-06-08 17:54:24 +10:00
builtinimport.c py/builtinevex: Handle invalid filenames for execfile. 2023-10-12 15:17:59 +11:00
compile.c py/compile: Fix async for's stack handling of iterator expression. 2023-07-13 13:50:50 +10:00
compile.h py: Pass in address to compiled module instead of returning it. 2022-12-08 12:27:23 +11:00
dynruntime.h py/dynruntime: Add mp_get_buffer. 2023-10-16 11:23:11 +11:00
dynruntime.mk py/dynruntime.mk: Allow building assembly source in natmods. 2022-08-11 14:00:13 +10:00
emit.h py/compile: Fix scope of assignment expression target in comprehensions. 2023-03-09 12:13:12 +11:00
emitbc.c all: Fix spelling mistakes based on codespell check. 2023-04-27 18:03:06 +10:00
emitcommon.c py/compile: Fix scope of assignment expression target in comprehensions. 2023-03-09 12:13:12 +11:00
emitglue.c py: Change ifdef DEBUG_PRINT to if DEBUG_PRINT. 2023-09-29 13:04:38 +10:00
emitglue.h py/emitnative: Access qstr values using indirection table qstr_table. 2022-05-23 15:43:06 +10:00
emitinlinethumb.c py/emitinlinethumb: Make float instruction use dynamically selectable. 2022-05-26 12:22:07 +10:00
emitinlinextensa.c py: Use unsigned comparison of chars. 2020-10-22 11:47:36 +02:00
emitnarm.c py/emitnative: Access qstr values using indirection table qstr_table. 2022-05-23 15:43:06 +10:00
emitnative.c py: Change ifdef DEBUG_PRINT to if DEBUG_PRINT. 2023-09-29 13:04:38 +10:00
emitnthumb.c py/emitnative: Access qstr values using indirection table qstr_table. 2022-05-23 15:43:06 +10:00
emitnx64.c py/emitnative: Access qstr values using indirection table qstr_table. 2022-05-23 15:43:06 +10:00
emitnx86.c py/emitnative: Access qstr values using indirection table qstr_table. 2022-05-23 15:43:06 +10:00
emitnxtensa.c py/emitnative: Access qstr values using indirection table qstr_table. 2022-05-23 15:43:06 +10:00
emitnxtensawin.c py/emitnative: Access qstr values using indirection table qstr_table. 2022-05-23 15:43:06 +10:00
formatfloat.c all: Fix various spelling mistakes found by codespell 2.2.6. 2023-10-03 11:24:50 +11:00
formatfloat.h all: Use the name MicroPython consistently in comments 2017-07-31 18:35:40 +10:00
frozenmod.c py: Rework bytecode and .mpy file format to be mostly static data. 2022-02-24 18:08:43 +11:00
frozenmod.h py/builtin: Clean up and simplify import_stat and builtin_open config. 2022-05-25 13:04:45 +10:00
gc.c py/gc: Improve calculation of new heap size in split-heap-auto mode. 2023-12-19 18:34:23 +11:00
gc.h py/gc: Add "max new split" value in result of gc.mem_free(). 2023-09-15 12:19:13 +10:00
grammar.h py/compile: Implement PEP 526, syntax for variable annotations. 2020-06-16 23:18:01 +10:00
lexer.c py/lexer: Change token position for new lines. 2023-11-03 15:56:10 +11:00
lexer.h py/builtinevex: Handle invalid filenames for execfile. 2023-10-12 15:17:59 +11:00
make_root_pointers.py py/make_root_pointers: Add MP_REGISTER_ROOT_POINTER parser/generator. 2022-07-18 13:48:23 +10:00
makecompresseddata.py all: Fix spelling mistakes based on codespell check. 2023-04-27 18:03:06 +10:00
makemoduledefs.py py/makemoduledefs.py: Automatically declare delegation attr functions. 2023-06-14 19:03:46 +10:00
makeqstrdata.py py/qstr: Add support for sorted qstr pools. 2023-10-30 11:10:02 +11:00
makeqstrdefs.py py/makeqstrdefs.py: Stop generating temporary intermediate file. 2023-12-14 22:55:08 -08:00
makeversionhdr.py all: Switch to new preview build versioning scheme. 2023-10-06 12:10:14 +11:00
malloc.c py/malloc: Fix DEBUG_print() args in m_realloc_maybe. 2023-09-04 10:26:09 +10:00
map.c py/map: Clear value when re-using slot with ordered dictionaries. 2023-01-13 14:21:32 +11:00
misc.h py/obj: Fix mp_obj_is_type compilation with C++. 2023-11-17 14:31:42 +11:00
mkenv.mk windows: Use the MicroPython logo as application icon. 2023-11-07 17:22:52 +11:00
mkrules.cmake py/mkrules.mk: List hash files as byproducts. 2023-12-15 15:48:07 +11:00
mkrules.mk py/mkrules: Add support for custom manifest variables. 2023-11-28 23:28:15 +11:00
modarray.c all: Use MP_REGISTER_EXTENSIBLE_MODULE for overrideable built-ins. 2023-06-08 17:54:21 +10:00
modbuiltins.c py/modbuiltins: Share vstr_add_char's implementation of utf8 encoding. 2023-11-28 23:34:56 +11:00
modcmath.c all: Remove third argument to MP_REGISTER_MODULE. 2022-06-02 16:31:37 +10:00
modcollections.c all: Use MP_REGISTER_EXTENSIBLE_MODULE for overrideable built-ins. 2023-06-08 17:54:21 +10:00
moderrno.c all: Use MP_REGISTER_EXTENSIBLE_MODULE for overrideable built-ins. 2023-06-08 17:54:21 +10:00
modgc.c py/gc: Add "max new split" value in result of gc.mem_free(). 2023-09-15 12:19:13 +10:00
modio.c all: Use MP_REGISTER_EXTENSIBLE_MODULE for overrideable built-ins. 2023-06-08 17:54:21 +10:00
modmath.c py/modmath: Fix two-argument math function domain check. 2023-02-24 15:55:12 +11:00
modmicropython.c py/gc: Make gc_dump_info/gc_dump_alloc_table take a printer as argument. 2023-03-10 10:58:10 +11:00
modstruct.c py/modstruct: Support pad bytes in struct format. 2023-09-01 14:50:49 +10:00
modsys.c py/modsys: Implement optional sys.intern. 2023-12-15 11:43:39 +11:00
modthread.c py/misc: Change sizeof to offsetof for variable-length alloc. 2023-11-03 16:03:18 +11:00
mpconfig.h py/modsys: Implement optional sys.intern. 2023-12-15 11:43:39 +11:00
mperrno.h all: Rename UMODULE to MODULE in preprocessor/Makefile vars. 2023-06-08 17:54:11 +10:00
mphal.h ports: Fix sys.stdout.buffer.write() return value. 2023-12-22 10:32:46 +11:00
mpprint.c py/mpprint: Fix length calculation for strings with precision-modifier. 2020-12-07 23:32:06 +11:00
mpprint.h py/mpprint: Fix formatting typo with mp_print_ext_t struct name. 2022-08-10 14:30:47 +10:00
mpstate.c all: Use the name MicroPython consistently in comments 2017-07-31 18:35:40 +10:00
mpstate.h py/modthread: Initialise nlr_jump_callback_top on threads. 2023-10-18 09:18:23 +11:00
mpthread.h py/modthread: Return thread id from start_new_thread(). 2023-09-03 18:49:18 +10:00
mpz.c py/mpz: Fix bugs with bitwise of -0 by ensuring all 0's are positive. 2021-12-21 18:00:05 +11:00
mpz.h py/mpz: Fix bugs with bitwise of -0 by ensuring all 0's are positive. 2021-12-21 18:00:05 +11:00
nativeglue.c py/dynruntime: Add mp_get_buffer. 2023-10-16 11:23:11 +11:00
nativeglue.h py/dynruntime: Add mp_get_buffer. 2023-10-16 11:23:11 +11:00
nlr.c py/nlr: Implement jump callbacks. 2023-06-02 21:50:57 +10:00
nlr.h py/nlr: Implement jump callbacks. 2023-06-02 21:50:57 +10:00
nlraarch64.c py/nlraarch64: Fix dangerous use of input register. 2023-06-14 17:43:44 +10:00
nlrmips.c py/nlrmips: Add native NLR support for MIPS architecture. 2022-11-15 17:09:49 +11:00
nlrpowerpc.c py/nlrpowerpc: Fix generation of ppc64 code on ppc32 build. 2022-08-11 14:04:13 +10:00
nlrsetjmp.c py/nlrsetjmp: Use MP_NLR_JUMP_HEAD macro to simplify code. 2023-06-02 21:47:34 +10:00
nlrthumb.c all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
nlrx64.c py/nlrx64: Mark nlr_push() as naked function when possible. 2023-09-20 11:48:36 +10:00
nlrx86.c all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
nlrxtensa.c all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
obj.c py/obj: Generalise mp_get_buffer so it can raise if a flag is set. 2023-10-16 11:22:55 +11:00
obj.h py/obj: Fix mp_obj_is_type compilation with C++. 2023-11-17 14:31:42 +11:00
objarray.c py/objarray: Disallow memoryview addition. 2023-05-19 13:33:54 +10:00
objarray.h py/objarray: Raise error on out-of-bound memoryview slice start. 2023-01-20 16:31:37 +11:00
objattrtuple.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objbool.c all: Rename UMODULE to MODULE in preprocessor/Makefile vars. 2023-06-08 17:54:11 +10:00
objboundmeth.c py/objboundmeth: Optimise check for types in binary_op. 2023-10-13 15:29:09 +11:00
objcell.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objclosure.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objcomplex.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objdeque.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objdict.c all: Rename UMODULE to MODULE in preprocessor/Makefile vars. 2023-06-08 17:54:11 +10:00
objenumerate.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objexcept.c py/mphal: Move configuration of ATOMIC_SECTION macros to mphal.h. 2023-12-01 14:14:08 +11:00
objexcept.h py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objfilter.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objfloat.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objfun.c py/misc: Change sizeof to offsetof for variable-length alloc. 2023-11-03 16:03:18 +11:00
objfun.h py: Rework bytecode and .mpy file format to be mostly static data. 2022-02-24 18:08:43 +11:00
objgenerator.c py/obj: Remove mp_generic_unary_op(). 2023-05-19 12:04:44 +10:00
objgenerator.h all: Use the name MicroPython consistently in comments 2017-07-31 18:35:40 +10:00
objgetitemiter.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objint.c py/objint: Allow int() to parse anything with the buffer protocol. 2023-06-01 15:11:06 +10:00
objint.h py/modsys: Use consistent naming pattern for module-level const objects. 2020-05-28 10:02:14 +10:00
objint_longlong.c py: Change MP_UNARY_OP_INT to MP_UNARY_OP_INT_MAYBE. 2023-06-01 13:01:07 +10:00
objint_mpz.c py: Change MP_UNARY_OP_INT to MP_UNARY_OP_INT_MAYBE. 2023-06-01 13:01:07 +10:00
objlist.c all: Rename UMODULE to MODULE in preprocessor/Makefile vars. 2023-06-08 17:54:11 +10:00
objlist.h py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objmap.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objmodule.c py/makemoduledefs.py: Automatically declare delegation attr functions. 2023-06-14 19:03:46 +10:00
objmodule.h py/makemoduledefs.py: Automatically declare delegation attr functions. 2023-06-14 19:03:46 +10:00
objnamedtuple.c py/misc: Change sizeof to offsetof for variable-length alloc. 2023-11-03 16:03:18 +11:00
objnamedtuple.h py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objnone.c all: Rename UMODULE to MODULE in preprocessor/Makefile vars. 2023-06-08 17:54:11 +10:00
objobject.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objpolyiter.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objproperty.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objrange.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objreversed.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objset.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
objsingleton.c py/obj: Remove mp_generic_unary_op(). 2023-05-19 12:04:44 +10:00
objslice.c py/objslice: Validate that the argument to indices() is an integer. 2023-11-21 22:28:57 +11:00
objstr.c py/objstr: Fix `str % {}` edge case. 2023-09-01 14:31:57 +10:00
objstr.h py/objstr: Add a helper to set mp_obj_str_t data. 2022-10-11 17:50:19 +11:00
objstringio.c py/stream: Add mp_stream___exit___obj that calls mp_stream_close. 2023-07-21 18:49:03 +10:00
objstringio.h py/objstringio: If created from immutable object, follow copy on write policy. 2017-06-09 17:33:01 +03:00
objstrunicode.c all: Rename UMODULE to MODULE in preprocessor/Makefile vars. 2023-06-08 17:54:11 +10:00
objtuple.c py/misc: Change sizeof to offsetof for variable-length alloc. 2023-11-03 16:03:18 +11:00
objtuple.h all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
objtype.c py/misc: Change sizeof to offsetof for variable-length alloc. 2023-11-03 16:03:18 +11:00
objtype.h py/obj: Optimise code size and performance for make_new as a slot. 2022-09-19 19:06:16 +10:00
objzip.c py/obj: Convert make_new into a mp_obj_type_t slot. 2022-09-19 19:06:15 +10:00
opmethods.c py/obj: Add accessors for type slots and use everywhere. 2022-09-19 19:06:07 +10:00
pairheap.c py/pairheap: Properly unlink node on pop and delete. 2020-03-26 01:21:04 +11:00
pairheap.h py/pairheap: Add helper function to initialise a new node. 2020-03-26 01:21:04 +11:00
parse.c py/parse: Always free lexer even if an exception is raised. 2023-09-14 13:03:31 +10:00
parse.h py/parse: Factor obj extract code to mp_parse_node_extract_const_object. 2022-04-14 22:44:56 +10:00
parsenum.c py/parsenum: Fix typo in #endif comment. 2023-06-14 17:32:01 +10:00
parsenum.h py/parsenum: Optimise when building with complex disabled. 2022-06-23 11:46:47 +10:00
parsenumbase.c all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
parsenumbase.h all: Use the name MicroPython consistently in comments 2017-07-31 18:35:40 +10:00
persistentcode.c py/qstr: Add support for sorted qstr pools. 2023-10-30 11:10:02 +11:00
persistentcode.h py/persistentcode: Bump .mpy sub-version. 2023-10-16 11:25:31 +11:00
profile.c py/profile: Remove the requirement to disable MICROPY_COMP_CONST. 2023-08-30 10:58:04 +10:00
profile.h py: Rework bytecode and .mpy file format to be mostly static data. 2022-02-24 18:08:43 +11:00
py.cmake all: Rename *umodule*.c to remove the "u" prefix. 2023-06-08 17:54:17 +10:00
py.mk all: Rename *umodule*.c to remove the "u" prefix. 2023-06-08 17:54:17 +10:00
pystack.c py: Introduce and use mp_raise_type_arg helper. 2021-07-15 00:12:41 +10:00
pystack.h all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
qstr.c py/qstr: Special case qstr_find_strn for empty string. 2023-11-07 16:01:50 +11:00
qstr.h py/qstr: Add support for sorted qstr pools. 2023-10-30 11:10:02 +11:00
qstrdefs.h py/modsys: Add optional mutable attributes sys.ps1/ps2 and use them. 2022-03-10 10:58:33 +11:00
reader.c py/builtinevex: Handle invalid filenames for execfile. 2023-10-12 15:17:59 +11:00
reader.h py/builtinevex: Handle invalid filenames for execfile. 2023-10-12 15:17:59 +11:00
repl.c py/makemoduledefs.py: Add a way to register extensible built-in modules. 2023-06-08 17:54:21 +10:00
repl.h py/modsys: Add optional mutable attributes sys.ps1/ps2 and use them. 2022-03-10 10:58:33 +11:00
ringbuf.c py/ringbuf: Implement put_bytes/get_bytes functions. 2023-05-01 16:47:03 +10:00
ringbuf.h py/ringbuf: Implement put_bytes/get_bytes functions. 2023-05-01 16:47:03 +10:00
runtime.c py/runtime: Remove declaration of function from inside function. 2023-11-03 15:21:51 +11:00
runtime.h py: Add port-agnostic inline functions for event handling. 2023-12-08 12:47:00 +11:00
runtime0.h py/dynruntime.h: Implement MP_OBJ_NEW_QSTR. 2023-09-01 16:14:22 +10:00
runtime_utils.c py: mp_call_function_*_protected(): Pass-thru return value if possible. 2017-12-05 00:38:41 +02:00
scheduler.c py: Add port-agnostic inline functions for event handling. 2023-12-08 12:47:00 +11:00
scope.c py: Rework bytecode and .mpy file format to be mostly static data. 2022-02-24 18:08:43 +11:00
scope.h all: Fix spelling mistakes based on codespell check. 2023-04-27 18:03:06 +10:00
sequence.c all: Fix spelling mistakes based on codespell check. 2023-04-27 18:03:06 +10:00
showbc.c py: Change jump-if-x-or-pop opcodes to have unsigned offset argument. 2022-03-28 15:43:09 +11:00
smallint.c all: Use the name MicroPython consistently in comments 2017-07-31 18:35:40 +10:00
smallint.h py/smallint: Introduce MP_SMALL_INT_BITS macro. 2022-03-25 12:23:43 +11:00
stackctrl.c py/stackctrl: Add gcc pragmas to ignore dangling-pointer warning. 2023-05-04 10:08:12 +10:00
stackctrl.h py/stackctrl: Prevent unused-var warning when stack checking disabled. 2021-06-05 11:03:09 +10:00
stream.c py/stream: Add mp_stream___exit___obj that calls mp_stream_close. 2023-07-21 18:49:03 +10:00
stream.h extmod/vfs_reader: Add file ioctl to set read buffer size. 2023-11-09 11:20:31 +11:00
unicode.c all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
unicode.h py/objstr: Add check for valid UTF-8 when making a str from bytes. 2017-09-06 16:43:09 +10:00
usermod.cmake rp2: Add support for USER_C_MODULES to CMake build system. 2021-03-31 00:26:01 +11:00
vm.c py/vm: Don't emit warning when using "raise ... from None". 2023-10-09 09:46:02 +11:00
vmentrytable.h py/vmentrytable: Ignore GCC -Woverride-init. 2020-10-22 11:47:36 +02:00
vstr.c all: Reformat C and Python source code with tools/codeformat.py. 2020-02-28 10:33:03 +11:00
warning.c py: Update my copyright info on some files. 2019-02-06 00:19:00 +11:00